There is a well near your house with a 20kg cylindrical spool (with a radius of...

There is a well near your house with a 20kg cylindrical spool (with a radius of 0.5m), wrapped with rope, upon which you attach a 5kg bucket. you let the bucket fall into the well from rest. 10s later, you can hear the bucket hit the water at the botttom. A) Determine the tension in the string B) what is the linear acceleration of the bucket? C) What is the angular acceleration of the spool? D)How much torque was required to make the spook spin at this acceleration? E)How far does the bucket ravel when it reaches the water? F)Through how many radians does the spool spin in this time? G)What is the final angular velocity of the spool? H) What is the final linear velocity of the spool?

Expert Solution

genius_generous answered 10 months ago

A very light string is wound around a cylindrical spool of inertia M and radius R....

A very light string is wound around a cylindrical spool of inertia M and radius R. The cylinder rotates on a frictionless horizontal axis with a moment of inertia 1 2MR2 . Attached to the end of the string is a block of inertia m, which pulls on the string and unwinds it from the cylinder, as the block falls. (a)Draw an extended free-body diagram for the cylinder, and a regular free-body diagram for the block. (b)Let m = 5...

A block is attached to a light string that is wrapped around a cylindrical spool. A)...

A block is attached to a light string that is wrapped around a cylindrical spool. A) the spool consists of a uniform solid disk of radius r= 0.500m and a rim along the outside edge of the disk at a radius of r = 0.500m. The mass of the solid disk is mdisk= 4.00 kg and the mass of the rim is also mrm= 4.00 kg. What is the moment of inertia of the entire spool? B) the block is...

A long straight cylindrical shell has an inner radius Ri and an outer radius R0.

A long straight cylindrical shell has an inner radius Ri and an outer radius R0. It carries a current I, uniformly distributed over its cross section. A wire is parallel to the cylinder axis, in the hollow region (r < Ri). The magnetic field is zero everywhere outside the shell (r > R0).We conclude that the wire: A) is on the cylinder axis and carries current I in the same direction as the current in the shell B) may be anywhere in...

A cylindrical proportional tube has an anode wire radius of 0.003 cm and a cathode radius...

A cylindrical proportional tube has an anode wire radius of 0.003 cm and a cathode radius of 2.0 cm. It is operated with an applied voltage of 2000 V. If a minimum electric field of 1.0 MV/m is required to initiate gas multiplication, what fraction of the internal volume of the tube corresponds to the multiplication region?

A coaxial cylindrical conductor with outer radius R2 and inner radius R1 and has dielectric Er...

A coaxial cylindrical conductor with outer radius R2 and inner radius R1 and has dielectric Er relative dielectric between the conductor. Is the charge per unit length on the Anner cylinder is lemda, find (a) D, E for a <r<b ( (b) potential difference between the conductors (c) the capacitance per unit length.

The power through a cylindrical resistor is 1.5 W. If the radius of this resistor is...

The power through a cylindrical resistor is 1.5 W. If the radius of this resistor is 5.2 mm and its length is 2.8 cm, calculate the magnitude of the current density. The resistivity of this resistor is 3.8 x10-5 Ω. m. Select one: a. 1.3x105 A/m2 b. 3.3x105 A/m2 c. 4.3x105 A/m2 d. 2.3x105 A/m2

a) A cylindrical length of wire has a radius of 4 mm and a length of...

a) A cylindrical length of wire has a radius of 4 mm and a length of 10 cm. If the length is growing at a rate of 2 cm/sec and the radius is shrinking at a rate of 1 mm/sec, what is the rate of change of the volume in cm3/sec at that point in time. (Be careful of units) b) Consider the same length of wire as before (radius of 4 mm and length of 10 cm). This time...

) A coaxial cable consists of a cylinder of radius ? surrounding by a thin cylindrical...

) A coaxial cable consists of a cylinder of radius ? surrounding by a thin cylindrical shell of radius 2?. Suppose the cable is along the ?-axis. The current density in inner cylinder is ? ⃗= (?0 + ??)?̂, where ?0 > 0 and ? > 0 are constant. The current in the outer shell, ?? ,is downward (−? direction). a) Find the magnetic field in regions 0 < ? < ?,? < ? < 2? and 2? < ?....

A cylindrical capacitor consists of a cylinder (of length L and radius a) with a total...

A cylindrical capacitor consists of a cylinder (of length L and radius a) with a total charge Q nested inside a thin conducting cylindrical shell (of length L and radius b) with total charge

Three objects, cylindrical rod (radius = 0.1 m), steel ball (radius = 0.1 m) and flat...

Three objects, cylindrical rod (radius = 0.1 m), steel ball (radius = 0.1 m) and flat screen (length = 0.1 m) with surface temperature of 65 ℃ are exposed in perpendicular direction to water flow at 30 m/s and 30 ℃. Assume the area of all three objects are the same as 1 m2 , determine the individual values of convective heat transfer coefficient for each object, and their respective heat loss.

Question