Question
In: Mechanical Engineering
A rotating shaft has four masses A, B, C, and D attached to it. The planes...
A rotating shaft has four masses A, B, C, and D attached to it. The planes that these masses rotating at are spaced equally. The magnitude of the masses are 6.5, 11.8, 4.2, and 5.1 kg, respectively. Calculate the radii that the masses should be placed at from the center of the shaft such that the system be in a complete dynamic balance. The shaft angular speed varies between 1760 and 1875 r.p.m. Assume whatever dimension or quantity that you decide it is necessary.
Solutions
samet mamat answered 3 hours agoRelated Solutions
A shaft carries four masses A, B, C and D placed in parallel planes perpendicular to...
A shaft carries four masses A, B, C and D placed in parallel
planes perpendicular to the shaft axis and in this order along the
shaft. The masses B and C are 40 Kg and 28 Kg and both are at 160
mm radius. While the masses in planes A and D are at 200 mm radius.
Angle between B & C is 100°, B & A is 190° and both the
angles being measured in the anticlockwise (mass B...
A shaft carries three masses A,B and C. Planes B and C are 60cm and 120cm...
A shaft carries three masses A,B and C. Planes B and C
are 60cm and 120cm from A. A, B and C are 50kg, 40kg and 60kg
respectively at a radius of 2.5cm each. The angular position of
mass B and mass C with A are 90° and 210° respectively. Find the
unbalanced force and couple(Use A as reference plane). Also find
the position and magnitude of balancing masses required at 10cm
radius in planes L and M midway between...
Q2. A shaft carries four masses A, B, C and D of different magnitude and revolving...
Q2. A shaft carries four masses A, B, C and D of
different magnitude and revolving at radii as mentioned below in
planes measured from A at 300 mm, 400 mm and 700 mm. The angles
between the cranks measured anticlockwise are A to B 450B to C 700
and C to D 1200 . The balancing masses are to be placed in planes X
and Y. The distance between the planes A and X is 100 mm, between X...
Three rotating masses A = 7 kg, B = 12 kg, and C = 11 kg,...
Three rotating masses A = 7 kg, B = 12 kg, and C = 11 kg, are
attached to a shaft with their centres of gravity at 25 mm, 55 mm
and 35 mm respectively from the shaft axis. The angular positions
of B and C from A are respectively 90o and
150o measured in the same direction. The distance
between the planes of rotation of A and B is 1.75 m and between B
and C is 2
m...
A project has four activities (A, B, C, and D) that must be performed sequentially. The...
A project has four activities (A, B, C, and D) that must be
performed sequentially. The probability distributions for the time
required to complete each of the activities are as follows:
Activity
Activity Time
(weeks)
Probability
A
5
0.32
6
0.39
7
0.27
8
0.02
B
4
0.18
6
0.51
8
0.31
C
7
0.10
9
0.29
11
0.43
13
0.15
15
0.03
D
10
0.61
12
0.39
Provide the base-case, worst-case, and best-case calculations
for the time to complete...
A machine with a rotating shaft has a total weight of 200 lbs, and is supported...
A
machine with a rotating shaft has a total weight of 200 lbs, and is
supported by springs. The damping constant for the system is found
to be 3 lb.sec/in. The resonant speed is determined exprimentally
to be 1200 rpm, and the corresponding amplitude of the main mass of
the machine is 0.50 inches. (a) Determine the amplitude for a speed
of 2400 rpm. (b) Determine the fixed value which amplitude will
eventually approach at high speed. (c) Determine the...
The following graph contains four lines (A, B, C and D), each of which has a...
The following graph contains four lines (A, B, C and D), each of which has a slope that is either positive, negative, zero, or infinite.For each of the following scenarios, indicate whether the relationship between the two variables is positive or negative, as well as which line on the previous graph has a slope that reflects this type of relationship. Hint: The X-axis and Y-axis on the graph are not labeled intentionally. You need to substitute the variables from each scenario...
The following graph contains four lines (A, B, C and D), each of which has a...
The following graph contains four lines (A, B, C and D), each of which has a slope that is either positive, negative, zero, or infinite.For each of the following scenarios, indicate whether the relationship between the two variables is positive or negative, as well as which line on the previous graph has a slope that reflects this type of relationship. Hint: The X-axis and Y-axis on the graph are not labeled intentionally. You need to substitute the variables from each scenario...
Consider an experiment with four independent variables: A, B, C, and D. Factor A has 3...
Consider an experiment with four independent variables: A, B, C,
and D.
Factor A has 3 levels and is a between-subjects variable; Factor
B has 2 levels and is a within-subjects variable; Factor C has 2
levels and is a between-subjects variable; Factor D has 3 levels
and is a within-subjects variable.
1. How many “cells” or “conditions” or “groups” are there in
this experiment?
2. If you want to test 10 participants per cell, how many TOTAL
participants will...
A process has four stages (A, B, C, and D). The stages have output rates of...
A process has four stages (A, B, C, and D). The stages have
output rates of 5 units/hr, 12 units/hr, 10 units/hr, and 7
units/hr, respectively. What is the output rate of this
process?
a.
12 units/hr
b.
10 units/hr
c.
7 units/hr
d.
5 units/hr
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- A Black Belt consultant in the ABC Corporation reported the Sigma Performance of a manufacturing line...
- List and describe five impediments to local participation in tourism planning.
- 1. Identify five: How and why did Southern and Northern white people differ over slavery? 2....
- The Sandersons are planning to refinance their home. The outstanding principal on their original loan is...
- There are an infinite number of ways that you can design your Organizational Unit structure within...
- Write a C++ program (using pointers and dynamic memory allocation only) to implement the following functions...
- Prepare a comprehensive and thumbnail brief of each of the following opinions: United States v. Kovel...
ADVERTISEMENT