Question

In: Mechanical Engineering

2.2 kW of power will be trasnmitted via chain-sprocket system. Rotational speed of input shaft is...

2.2 kW of power will be trasnmitted via chain-sprocket system. Rotational speed of input shaft is 20 rpm. Required approximate rotational speed of input shaft is 20 rpm. Required approximate rotational speed for the out shaft is 7 rpm. Approximate distance between center lines of input and output shafts should be 900 mm. This chain-sprocket system is used for an elevator and it is asked to use single or multiple DIN 8187 chain with 31.75 mm pitch.

a) Calculate number of teeth on sprocket, which is on output shaft, is number of teeth on the sprocket on input shaft is 19.

b) Calculate input power for selection of chain and select the appropriate chain type.

c) Calculate pitch circle diameters of driving and driven sprockets, linear velocity of chain, length of chain, (number of chain links), and exact center line distance between driving and driven sprocket.

d) Calculate factor of safety of the selected chain.

Solutions

Expert Solution


Related Solutions

2 kW of power will be trasnmitted via chain-sprocket system. Rotational speed of input shaft is...
2 kW of power will be trasnmitted via chain-sprocket system. Rotational speed of input shaft is 20 rpm. Required approximate rotational speed of input shaft is 20 rpm. Required approximate rotational speed for the out shaft is 7 rpm. Approximate distance between center lines of input and output shafts should be 900 mm. This chain-sprocket system is used for an elevator and it is asked to use single or multiple DIN 8187 chain with 31.75 mm pitch. a) Calculate number...
A wheel is rotating freely at angular speed 530 rev/min on a shaft whose rotational inertia...
A wheel is rotating freely at angular speed 530 rev/min on a shaft whose rotational inertia is negligible. A second wheel, initially at rest and with 5 times the rotational inertia of the first, is suddenly coupled to the same shaft. (a) What is the angular speed of the resultant combination of the shaft and two wheels? (b) What fraction of the original rotational kinetic energy is lost?
A roller chain drive is to transmit a design power of 9.0 kW with the faster...
A roller chain drive is to transmit a design power of 9.0 kW with the faster shaft having a speed of 84 rpm. Select the most suitable chain size and type of lubrication from the following options if the pinion has 15 teeth: 1 - Pitch of 25.4 mm, oil bath or disc lubrication, 2 - Pitch of 19 mm, drip feed lubrication, 3 - Pitch of 25.4 mm, drip feed lubrication, 4 - Pitch of 19 mm, drip feed...
If the measured power is 18.5 watt, rotational speed is 245 rpm, radius R of inner...
If the measured power is 18.5 watt, rotational speed is 245 rpm, radius R of inner cylinder is 72.5 mm, thickness of liquid is h1 = h2 = 2.35 mm and the height of the fluid is y = 335 mm, determine the viscosity of the viscometer fluid.
A small-scale Kaplan turbine has a power output of 8MW, an available head at turbine entry of 13.4 m, and a rotational speed of 200rev/min.
A small-scale Kaplan turbine has a power output of $8 \mathrm{MW}$, an available head at turbine entry of $13.4 \mathrm{~m}$, and a rotational speed of $200 \mathrm{rev} / \mathrm{min}$. The inlet guide vanes have a length of $1.6 \mathrm{~m}$ and the diameter at the trailing edge surface is $3.1 \mathrm{~m}$. The runner diameter is $2.9 \mathrm{~m}$ and the hub-tip ratio is 0.4. Assuming the hydraulic efficiency is $92 \%$ and the runner design is "free-vortex," determineThe radial and tangential components...
A hydroelectric power station is required to generate a total of 4.2 MW from a number of single-jet Pelton wheel turbines each operating at the same rotational speed of 650 rpm,
A hydroelectric power station is required to generate a total of 4.2 MW from a number of single-jet Pelton wheel turbines each operating at the same rotational speed of 650 rpm, at the same power output and at a power specific speed of 1.0 rev. The nozzle efficiency ηN of each turbine can be assumed to be 0.98, the overall efficiency ηo is assumed to be 0.88, and the blades speed to jet speed ratio v is to be 0.47....
A Kaplan turbine designed with a shape factor (power specific speed) of 3.0 (rad), a runner tip diameter of 4.4 m, and a hub diameter of 2.0 m, operates with a net head of 20 m and a shaft speed of 150 rev/min.
A Kaplan turbine designed with a shape factor (power specific speed) of 3.0 (rad), a runner tip diameter of 4.4 m, and a hub diameter of 2.0 m, operates with a net head of 20 m and a shaft speed of 150 rev/min. The absolute flow at runner exit is axial. Assuming that the hydraulic efficiency is 90% and the mechanical efficiency is 99%, determine:The volume flow rate and shaft power output;The relative flow angles at the runner inlet and...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT