Question

In: Electrical Engineering

Followings are the specifications of a laser displacement sensor: (a) Measurement range: +10 mm (b) Measurement...

Followings are the specifications of a laser displacement sensor:
(a) Measurement range: +10 mm
(b) Measurement centre point: 50 mm
(c) Resolution: 1.5 μ m
(d) Linearity: +0.05 % FS
(e) Response time: 60 μs
(f) Linear output: 4-20 mA
Answer the following questions based on Specs given above.
(i) Draw input output graph for the sensor and properly label it.
(ii) Evaluate the sensitivity of the sensor in mA/mm.
(iii) An object is at a distance of 57 mm from the sensor. Determine the output
of the sensor in mA?
(iv) What is the error in the output of the sensor for the case above [part(iii)]?

Solutions

Expert Solution


Related Solutions

The specification of a pressure sensor is shown below: Range of measurement: 10 psi to 250...
The specification of a pressure sensor is shown below: Range of measurement: 10 psi to 250 psi. Accuracy : ±0.2% of span. Transfer function : 0.5?/psi. Transfer function accuracy: ±0.1% Sensor output resistance, R : 2k? - 20k?. Sensor time constant: 200 ms . The resistance is then converted to a voltage with the transfer function: V= 10R/R+1000 1/Determine the uncertainty for measurement of 120psi. What is the possible pressure? 2/Determine the possible range of the transfer function. Interpret the...
In an experiment the sample mean of a set of measurement is 10 mm and the...
In an experiment the sample mean of a set of measurement is 10 mm and the sample standard deviation is 4 mm for a sample size of 36. Using sketch indicate where we can expect the location of population mean
2 10 6 10 10 4 5 4 5 8 a) Calculate the range. b) Calculate...
2 10 6 10 10 4 5 4 5 8 a) Calculate the range. b) Calculate the variance. (Round to two decimal places as needed.) c) Calculate the standard deviation. (Round to two decimal places as needed.) 13 28 30 17 24 9 44 21 a​)Determine the 20th percentile. b​)Determine the 30th percentile. c​)Determine the 70th percentile.
10- a) What must always be used with an Oscilloscope when making a measurement? b) How...
10- a) What must always be used with an Oscilloscope when making a measurement? b) How do you read the amplitude (Frequency) of a signal from the waveform on an oscilloscope? c) How do you calculate phase shift by measuring the time delay between zero crossings of two different signals?
10- a) What must always be used with an Oscilloscope when making a measurement? b) How...
10- a) What must always be used with an Oscilloscope when making a measurement? b) How do you read the amplitude (Frequency) of a signal from the waveform on an oscilloscope? c) How do you calculate phase shift by measuring the time delay between zero crossings of two different signals?
Consider the following sample. 17, 7, 25, 20, 10, 18 (a) Find the range. (b) Find...
Consider the following sample. 17, 7, 25, 20, 10, 18 (a) Find the range. (b) Find the variance. (Give your answer correct to two decimal places.) (c) Find the standard deviation. (Give your answer correct to two decimal places.)
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT