A hose with a diameter of 1.6 cm is used to fill a pool (circular in...

A hose with a diameter of 1.6 cm is used to fill a pool (circular in shape) of 6 m in diameter. How long will it take for the water in the pool to reach a depth of 1.4 m, knowing that the water flows at a speed of 0.40 m/s?

*Demonstrate all algebraic procedures*

Expert Solution

The answer is in the images. Page number is mentioned at right top.

genius_generous answered 2 years ago

A water hose 2.85 cm in diameter is used by a gardener to fill a 28.0-liter...

A water hose 2.85 cm in diameter is used by a gardener to fill a 28.0-liter bucket. (One liter = 1,000 cm3.) The gardener notices that it takes 1.00 min to fill the bucket. A nozzle with an opening of cross-sectional area 0.500 cm2 is then attached to the hose. The nozzle is held so that water is projected horizontally from a point 1.00 m above the ground. Over what horizontal distance can the water be projected? 4.33 m *CORRECT*...

Filling a Swimming Pool with a Garden Hose A 1/2 in. (inside) diameter garden hose is...

Filling a Swimming Pool with a Garden Hose A 1/2 in. (inside) diameter garden hose is used to fill a round swimming pool 7.18 m in diameter. How many days will it take to fill the pool to a depth of 1.52 m if water issues from the hose at a speed of 0.258 m/s? You do not need to enter the units.

A fire hose has an inside diameter of 6.40 cm. Suppose such a hose carries a...

A fire hose has an inside diameter of 6.40 cm. Suppose such a hose carries a flow of 40.0 L/s starting at a gauge pressure of 1.62×106N/m2 . The hose goes 10.0 m up a ladder to a nozzle having an inside diameter of 3.00 cm. Calculate the Reynolds numbers for flow in the fire hose and nozzle to show that the flow in each must be turbulent.

A garden hose with an internal diameter of 2.7 cm is connected to a (stationary) lawn...

A garden hose with an internal diameter of 2.7 cm is connected to a (stationary) lawn sprinkler that consists merely of a container with 26 holes, each 0.33 cm in diameter. If the water in the hose has a speed of 0.86 m/s, at what speed does it leave the sprinkler holes?

To water the yard, you use a hose with a diameter of 3.1 cm. Water flows...

To water the yard, you use a hose with a diameter of 3.1 cm. Water flows from the hose with a speed of 1.5 m/s. If you partially block the end of the hose so the effective diameter is now 0.55 cm, with what speed does water spray from the hose?

2. A garden hose attached to a nozzle is used to fill a 15-gal bucket. The...

2. A garden hose attached to a nozzle is used to fill a 15-gal bucket. The inner diameter of the hose is 1.5 cm, and it reduces to 0.8 cm at the nozzle exit. If it takes 50 s to fill the bucket with water (density = 1 kg/L), determine (a) the volume and mass flow rates of water through the hose, and (b) the average velocity of water at the nozzle exit.

Water flowing through a garden hose of diameter 2.75 cm fills a 24.0-L bucket in 1.30...

Water flowing through a garden hose of diameter 2.75 cm fills a 24.0-L bucket in 1.30 min. (a) What is the speed of the water leaving the end of the hose? m/s (b) A nozzle is now attached to the end of the hose. If the nozzle diameter is one-third the diameter of the hose, what is the speed of the water leaving the nozzle? m/s

Two identical capacitors each consists of two circular parallel plates with a radius of 1.6 cm...

Two identical capacitors each consists of two circular parallel plates with a radius of 1.6 cm and a separation distance of 3.0 mm. They are filled with a dielectric which has a dielectric constant (strength) of LaTeX: \kappaκκ = 32. These two capacitors are connected in parallel, and connected to a 1.5V battery a) what is their total capacitance? b) If the dielectric is removed what is the total capacitance? c) What energy is stored on the capacitors when they...

Figure is an edge-on view of a 14 cm diameter circular loop rotating in a uniform...

Figure is an edge-on view of a 14 cm diameter circular loop rotating in a uniform 3.8×10-2 T magnetic field. I solved part a by using φ= B A cos θ = Bπr2 cosθ = (3.8 x 10-2) π (.07)2cos (0 degrees)= 5.8 x 10-4 Wb and got correct answer, but having trouble finding the right answer for part B. I used same equation for part B and used cos (30)= got wrong answer. Is there another equation for finding the answer with the...

Consider a circular air duct (no insulation) with a constant diameter of 10 cm and length...

Consider a circular air duct (no insulation) with a constant diameter of 10 cm and length of 1 m. The inlet condition is 40 deg C and 20 m/s. The wall of the duct is at a constant temperature of 25 deg C. a) Find the exit temperature of the air flow. Report answer in deg C with 3 significant figures. b) Find the rate of heat lost from the air flow. Report answer in kW with 3 significant figures.

Question