Usually, for a given slump, the cement and water demand will _________ as the maximum size...

Usually, for a given slump, the cement and water demand will _________ as the maximum size of coarse aggregates decrease.
A. increase B. decrease C. not change

Compare between curve A and B in the particle size distribution figure shown below, which one represents a well-graded aggregate? Your answer is _________.

What are the major similarities and differences between pozzolanic and hydraulic reactions for cementitious materials? (2 points)

Please explain why the impermeability and chemical corrosion resistance of the concrete are improved by using supplemental cementitious materials?

Expert Solution

Ally Wells answered 5 months ago

Given a concrete mix as follows: Cement 1 bag 3.15 Water &nb

Given a concrete mix as follows: Cement 1 bag 3.15 Water 60 lbs. 1.0 Sand 230 lbs. 2.65 (5% excess moisture) Gravel 380 lbs. 2.66 (2% excess moisture) Determine the quantity of each item that you would use for a 27 cubic foot mixer (you must only use whole bags of cement) weights for sand and gravel, bags for cement and gallons for water (ONE (1) CUBIC FOOT OF WATER = 7.48 GALLONS).

Explain why an increase in water-to-cement ratio for a fixed amount of cement results in lower...

Explain why an increase in water-to-cement ratio for a fixed amount of cement results in lower concrete strength.

What are the details of the following things: Sitting time , WATER CONTENT Slump test ,...

What are the details of the following things: Sitting time , WATER CONTENT Slump test , Flow teble ,Shear strength ASTM , Consolidation test

The demand for a 12-ounce bottle of sparkling water is given in the table. Demand Schedule...

The demand for a 12-ounce bottle of sparkling water is given in the table. Demand Schedule for Sparkling Water in 12-ounce Bottles Price (dollars per bottle) Demand (million bottles) 2.29 25 2.69 9 3.09 3 3.49 2 3.89 1 4.29 0.5 (a) Write the function for the exponential model that gives demand in million bottles, as a function of price per bottle p, with data from 2.29 ≤ p ≤ 4.29. (Round all numerical values to two decimal places.) D(p)...

Do you know affects of water/cement ratio and supplementary cement materials on transition zone?

Two local ready-mix cement manufacturers, Here and There, have combined demand given by Q = 105...

Two local ready-mix cement manufacturers, Here and There, have combined demand given by Q = 105 − P. Their total costs are given by TC Here = 5 Q Here + 0.5 Q 2Here and TC There = 5 Q There + 0.5 Q 2Here. If they successfully collude, their maximum joint profits will be: $2,500 $2,000 $1,000 $500 $1,600

Q2)What would be the maximum aggregate size used for the given mixture properties by using ACI...

Q2)What would be the maximum aggregate size used for the given mixture properties by using ACI Method of Mix Design. 28-day specified concrete strength is 12 Mpa, standard deviation is choosen as 3.7Mpa and it is required that no more than 1 test result in 200 will fall below the specified strength. Project Title:Detoration of wood column of a commercial building Project summary:Wood deterioration at the lower level of a heavy timber column, which supports five floor levels, was remedied...

Why is maximum pipe size advantageous?

Maximum theoretical percent from crystallization when given solubilities in hot and cold water

The solubility of acetanilide in hot water (5.5g/100ml at 100℃) is not very great, and its solubility in cold water (.53g/100ml at 0℃) is still significant. What is the maximum theoretical percent recovery from the crystallization of 5g of acetanilide from 100ml of water (assuming the solution is chilled to 0℃ for filtration).

why concrete is weaker than cement paste?explain the affects of water /cement ratio and supplemantary cementitious...

why concrete is weaker than cement paste?explain the affects of water /cement ratio and supplemantary cementitious materials on transition zone

Question