Air at 90.0°C and 1.0 atm (absolute) contains 7.0 mole% water. A continuous stream of this...

Air at 90.0°C and 1.0 atm (absolute) contains 7.0 mole% water. A continuous stream of this air enters a compressor–condenser, in which the temperature is lowered to 18.6°C and the pressure is raised to 2.90 atm. The air leaving the condenser is then heated isobarically to 90.0°C. Calculate the fraction of water that is condensed from the air, the relative humidity of the outlet air at 90.0°C, and the ratio (m3 outlet air at 90.0°C)/(m3 feed air) at 90.0°C.

Find

Fraction of water condensed

Relative humidity of the outlet air

Volume ratio of outlet to inlet air:

Solutions

Expert Solution

ANSWER::

GIVEN THAT::

Amanda K answered 4 months ago

Next > < Previous

Related Solutions

A hydrogen-rich gas stream contains 1.0 mole % carbon monoxide. It is desired to use a...

A hydrogen-rich gas stream contains 1.0 mole % carbon monoxide. It is desired to use a microporous ceramic membrane for separating carbon monoxide (CO) from hydrogen gas at a pressure of 1 atm and a temperature of 400C. The average pore diameter of the membrane is 15 nm and the void fraction is 0.30. a) Estimate the molecular diffusivity of CO in a mixture with H2 b) Determine the Knudsen diffusion coefficient and the effective diffusion coefficient for CO in...

Consider a feed stream to a Claus process that consists of 10.0 mole% H2S and 90.0%...

Consider a feed stream to a Claus process that consists of 10.0 mole% H2S and 90.0% CO2. Onethird of the stream is sent to a furnace where the H2S is burned completely with a stoichiometric amount of air fed at 1 atm and 25°C. The combustion reaction is H2S 3 2 O2! SO2 H2O The product gases from this reaction are then mixed with the remaining two-thirds of the feed stream and sent to a reactor in which the following...

8.56. Humid air at 70°C and 1.0 atm with 6°C of superheat is fed to a...

8.56. Humid air at 70°C and 1.0 atm with 6°C of superheat is fed to a condenser. Gas and liquid streams leave the condenser in equilibrium at 25°C and 1 atm. (a) Assume a basis of calculation of 100 mol inlet air, draw and label a flowchart (including Q in the labeling), and carry out a degree-of-freedom analysis to verify that all labeled variables can be determined. (b) Write in order the equations you would solve to calculate the mass...

The vaporization of 1 mole of liquid water (the system) at 100.9°C, 1.00 atm, is endothermic....

The vaporization of 1 mole of liquid water (the system) at 100.9°C, 1.00 atm, is endothermic. H2O(l)+40.7kJ H2O(g) Assume at exactly 100.0°C and 1.00 atm total pressure, 1.00 mole of liquid water and 1.00 mole of water vapor occupy 18.80 mL and 30.62 L, respectively. A)Calculate the work done on or by the system when 2.45 mol of liquid H2O vaporizes. __________J Calculate the water's change in internal energy. ____________kj

The vaporization of 1 mole of liquid water (the system) at 100.9°C, 1.00 atm, is endothermic....

The vaporization of 1 mole of liquid water (the system) at 100.9°C, 1.00 atm, is endothermic. Assume at exactly 100.0°C and 1.00 atm total pressure, 1.00 mole of liquid water and 1.00 mole of water vapor occupy 18.80 mL and 30.62 L, respectively. H20 (l) +40.7kJ ----> H20 (g) Please answer both parts of the question: 1. Calculate the work done on or by the system when 3.45 mol of liquid H2O vaporizes. 2. Calculate the water's change in internal...

A 90.0 cm^3 box contains helium at a pressure of 2.50 atm and a temperature of...

A 90.0 cm^3 box contains helium at a pressure of 2.50 atm and a temperature of 100 ∘C. It is placed in thermal contact with a 220 cm^3 box containing argon at a pressure of 3.50 atm and a temperature of 400 ∘C PartA What is the initial thermal energy of each gas? Ei(He),Ei(Ar)= PartB What is the final thermal energy of each gas? Ei(He),Ei(Ar)= PartC How much heat energy is transferred, and in which direction? Etrans = PartE What...

A 1.0 L container at 298 K contains 1 mole of hydrogen and 2 mole of...

A 1.0 L container at 298 K contains 1 mole of hydrogen and 2 mole of methane gases. The partial pressures of the two gases and the total pressure is Select one: a. pH2 = 24.44 atm, p CH4 = 48.87 atm, P total = 73.31 atm b. pH2 = 24.44 atm, p CH4 = 24.44 atm, P total = 48.87 atm c. pH2 = 24.44 atm, p CH4 = 48.87 atm, P total = 24.44 atm d. pH2 =...

Given: Vapor–liquid equilibrium data in mole fractions for the system acetone–air–water at 1 atm (101.3 kPa)...

Given: Vapor–liquid equilibrium data in mole fractions for the system acetone–air–water at 1 atm (101.3 kPa) are as follows: y acetone in air 0.004 0.008 0.014 0.017 0.019 0.020 x acetone in water 0.002 0.004 0.006 0.008 0.010 0.012 Find: (a) Plot the data as (1) moles acetone per mole air versus moles acetone per mole water, (2) partial pressure of acetone versus g acetone per g water, and (3) y versus x. (b) If 20 moles of gas containing...

A gas mixture contains 20.0 mole% H2O(v) and 80.0 mole% N2. The gas temperature and absolute...

A gas mixture contains 20.0 mole% H2O(v) and 80.0 mole% N2. The gas temperature and absolute pressure at the start of each of the three parts of this problem are 66°C and 700.0 mm Hg. Ideal gas behavior may be assumed in every part of this problem. a. If some of the gas mixture is put in a cylinder and slowly cooled at constant pressure, at what temperature would the first drop of liquid form? °C b. If a 30.0...

A gas mixture contains 20.0 mole% H2O(v) and 80.0 mole% N2. The gas temperature and absolute...

A gas mixture contains 20.0 mole% H2O(v) and 80.0 mole% N2. The gas temperature and absolute pressure at the start of each of the three parts of this problem are 71°C and 700.0 mm Hg. Ideal gas behavior may be assumed in every part of this problem. a. If some of the gas mixture is put in a cylinder and slowly cooled at constant pressure, at what temperature would the first drop of liquid form? °C b. If a 30.0...

Subjects