Gaseous octane (C8H18) at 25 C, 1 atm enters a combustion chamber operating at steady state...

Gaseous octane (C8H18) at 25 C, 1 atm enters a combustion chamber operating at steady state and burns adiabatically with the stoichiometric amount of air entering at the same conditions. The combustion products consisting of CO2, CO, H2O(g), H2, O2, and N2 exit the combustion chamber at 2600 K and 1 atm.

Determine the composition of the products. Draw a schematic of the problem and label with known information and list all appropriate assumptions.

Hint: You have to solve two algebraic equations. To obtain the two solutions, one of the methods is the iterative method.

Expert Solution

Amanda K answered 5 months ago

Problem 15.10: Liquid octane (C8H18) enters a steady-flow combustion chamber at 25°C and 1 atm at...

Problem 15.10: Liquid octane (C8H18) enters a steady-flow combustion chamber at 25°C and 1 atm at a rate of 0.35 kg/min. It is burned with 50 percent excess air that also enters at 25°C and 1 atm. After combustion, the products are allowed to cool to 25°C. Assuming complete combustion and that all the H2O in the products is in liquid form, determine (a) the heat transfer rate from the combustion chamber, (b) the entropy generation rate, and (c) the...

A liquid octane (C8H18) enters a combustion chamber of a gas turbine stationary at 1 atm...

A liquid octane (C8H18) enters a combustion chamber of a gas turbine stationary at 1 atm and 25 °C, and burns with 300% of excess air that enters the chamber in the same state. Determine the heat of combustion if the products come out at 226.85 °C (kJ/kg) Determine adiabatic flame temperature (°C)

methane gas CH4 enters a steady flow combustion chamber at 25 oC and 1 atm and...

methane gas CH4 enters a steady flow combustion chamber at 25 oC and 1 atm and is burned with 40 percent excess air, which also enters at 25 oC and 1 atm. After combustion, the products are allowed to cool to 25 oC. Assume complete combustion, determine the heat transfer per kmol of CH4

A small gas turbine uses C8H18(l) for fuel and it enters the combustion chamber at 25◦C...

A small gas turbine uses C8H18(l) for fuel and it enters the combustion chamber at 25◦C whereas air coming from the high pressure stage is at 287◦C . The products of combustion leave the combustion chamber at 1167◦C . The fuel is injected at a rate of 0.95 kg/min where it is mixed and burned with 400 % excess air. An analysis of combustions reveals that all the hydrogen in the fuel burns to H2O but only 90% of the...

Liquid Propane (C3H8(l)) enters a combustion chamber at 25 degrees C and 1 atm at a...

Liquid Propane (C3H8(l)) enters a combustion chamber at 25 degrees C and 1 atm at a rate of 0.4 kg/min where it is mixed and burned with 150% excess air that enters the combustion chamber at 25 degrees C. The heat transfer from the combustion process is 53 kW. Determine (c) the average specific heat at constant pressure of the product gasses, and (d) the temperature of the products of combustion.

The combustion of liquid octane, C8H18, in the presence of gaseous oxygen yields carbon dioxide and...

The combustion of liquid octane, C8H18, in the presence of gaseous oxygen yields carbon dioxide and liquid water. 2C8H18(l)+25O2(g)-------------->16CO2(g)+18H2O(l) How many grams of water are produced by the reaction of 17.0 g of octane?(fill in the blank) _________ g H2O

Air at 28 °C, 1 bar, 50% relative humidity enters an insulated chamber operating at steady...

Air at 28 °C, 1 bar, 50% relative humidity enters an insulated chamber operating at steady state with a mass flow rate of 5 kg/min and mixes with a saturated moist air stream entering at 4 °C, 1 bar with a mass flow rate of 8 kg/min. A single mixed stream exits at 1 bar. Determine (a) the relative humidity and temperature, in °C, of the exiting stream.

The complete combustion of octane, a component of gasoline, proceeds as follows: 2 C8H18+25 O2 produces...

The complete combustion of octane, a component of gasoline, proceeds as follows: 2 C8H18+25 O2 produces 16 CO2+18 H20 How many moles of O2 are needed to burn 1.50mol of C8H18? Octane has a density of 0.692g/ml at 20 degrees celsius . How many grams of O2 are required to burn 15.0gal of C8H18?

refrigerant 134a enters the evaporator of a refrigeration system operating at steady state at -12°C and...

refrigerant 134a enters the evaporator of a refrigeration system operating at steady state at -12°C and a quality of 20% at a velocity of 7 m/s. At the exit, the refrigerant is a saturated vapor at -12°C. The evaporator flow channel has constant diameter of 1.7cm. Determine the mass flow rate of the refrigerant in kg/s Determine the velocity at the exit in m/s

Steam enters an adiabaticnozzle operating at steady state at 20 bar, 320°C, with a velocity of...

Steam enters an adiabaticnozzle operating at steady state at 20 bar, 320°C, with a velocity of 100 m/s. The exit pressure and temperature are 7 bar and 200°C, respectively. The mass flow rate is 5 kg/s. Neglecting potential energychanges, determine: a.the exit velocity, in m/s. b.the exit flow area, in cm2

Question