A stream of saturated water at 54 o C at 25 lbm/min and ammonia solution (50...

A stream of saturated water at 54 o C at 25 lbm/min and ammonia solution (50 wt%) at 150 lbm/min are fed to a boiler at 1 atm. The enthalpy of the ammonia solution relative to the reference conditions is 125 BTU/lbm. The liquid and vapor products are leaving the system. The liquid composition is to be 13 wt% NH3. Determine the rate at which heat must be transferred to the system. Includes diagram, mass balance, energy balance.

Solutions

Expert Solution

Amanda K answered 1 week ago

Next > < Previous

Related Solutions

Problem 1: a. An incoming stream of 1500 lbmol/min consists of saturated water with 62% liquid...

Problem 1: a. An incoming stream of 1500 lbmol/min consists of saturated water with 62% liquid water and 28% steam at 40 bar. This stream is heated at constant pressure to 700ºC. Using the steam tables, what is the heat transfer requirement for this step in kW? b. This steam is then compressed isothermally to steam at 150 bar in a second step. What is the heat transfer requirement for this step in kW?

What is the pH at 25 ∘C of water saturated with CO2 at a partial pressure...

What is the pH at 25 ∘C of water saturated with CO2 at a partial pressure of 1.20 atm ? The Henry's law constant for CO2 at 25 ∘C is 3.1×10−2mol/L-atm. The CO2 is an acidic oxide, reacting with H2O to form H2CO3.

A chemist titrates 200.0mL of a 0.7669M ammonia NH3 solution with 0.4750M HBr solution at 25°C...

A chemist titrates 200.0mL of a 0.7669M ammonia NH3 solution with 0.4750M HBr solution at 25°C . Calculate the pH at equivalence. The pKb of ammonia is 4.75 . Round your answer to 2 decimal places.

A dilute aqueous solution of sulfuric acid at 25°C is used to absorb ammonia in a...

A dilute aqueous solution of sulfuric acid at 25°C is used to absorb ammonia in a continuous reactor, thereby producing ammonium sulfate, a fertilizer: 2NH3(g) + H2SO4(aq) ? (NH4)2SO4(aq) a)If the ammonia enters the absorber at 75°C. the sulfuric acid enters at 25°C, and the product solution emerges at 25°C, how much heat must be withdrawn from the unit per mol of (NH4)2SO4 produced? b)Estimate the final temperature if the reactor of part (a) is adiabatic and the product of...

at 25 C, a 0.010mol/L ammonia solution is 4.3 percent ionized. Calculate the pH

100 mL of a saturated solution of magnesium palmitate, Mg(C16H31O2)2, is prepared at 25 °C. The...

100 mL of a saturated solution of magnesium palmitate, Mg(C16H31O2)2, is prepared at 25 °C. The Ksp is 3.3 × 10^-12 . To this solution is added 0.015 g of magnesium palmitate and the temperature is raised to 50 °C. The Ksp is 4.8 × 10^-12. How much of the solid magnesium palmitate remains? == I understand that the lower the Ksp, the less soluble a compound (lower molar solubility). I have a final on tuesday morning and would like...

A mixture of saturated liquid water and saturated steam at T = 120 °C has a...

A mixture of saturated liquid water and saturated steam at T = 120 °C has a specific enthalpy of 2000 kJ⁄kg. What is the quality of this mixture? if you could show how to do it, that'd be great.

A) Calculate the pH of a .01M KOH solution in water at 25 degrees C B)...

A) Calculate the pH of a .01M KOH solution in water at 25 degrees C B) What is the percentage of .01M acetic acid dissociated at 25 degrees C?

If theres saturated aqueous solution of Fe(OH)2 at 25°C and Ksp = 4.87 × 10−17, which...

If theres saturated aqueous solution of Fe(OH)2 at 25°C and Ksp = 4.87 × 10−17, which one is false statement? A. Adding acid to the solution will increase the solubility. B. Fe(OH)2 is a strong electrolyte. C. The pH of the solution will be greater than 7. D. The solubility of the salt will be equal to [OH−]. E. Addition of more solid Fe(OH)2 to the solution will increase the hydroxide ion concentration. Whats pH of saturated solution of Mg(OH)2?...

Calculate the fugacity and fugacity coefficient of saturated liquid water at 25 degrees.

Subjects