Change in concentration of salt in a reactor can be modeled by the following equation y’...

Change in concentration of salt in a reactor can be modeled
by the following equation y’ = ty+y1/2
Initial concentration of salt at time (t= 0 hours) is 1g/l, y(0)=
1, find the concentration of salt after 0.2 hour y(0.2)= ? by
using Euler, Heun and RK4 methods. Use h= 0.1

Expert Solution

The solution steps are shown below:

Amanda K answered 6 months ago

The following equation describes a certain dilution process, where y(t) is the concentration of salt in a tank of freshwater to which salt brine is being added.

The following equation describes a certain dilution process, where y(t) is the concentration of salt in a tank of freshwater to which salt brine is being added. Suppose that y(0) = 0. Plot y(t) for 0 ≤ t ≤ 10.

Describe a situation in real life that can be modeled by an algebraic equation or system...

Describe a situation in real life that can be modeled by an algebraic equation or system of equations. How about one modeled by an inequality or system of inequalities? If it is a situation you read about or saw on television, please give the appropriate citation.

Consider the system modeled by the differential equation dy/dt - y = t with initial condition y(0) = 1

Consider the system modeled by the differential equation dy/dt - y = t with initial condition y(0) = 1 the exact solution is given by y(t) = 2et − t − 1 Note, the differential equation dy/dt - y =t can be written as dy/dt = t + y using Euler’s approximation of dy/dt = (y(t + Dt) – y(t))/ Dt (y(t + Dt) – y(t))/ Dt = (t + y) y(t + Dt) =...

Derive mathematical expressions that predict the effluent concentration of the batch reactor, completely mixed flow reactor,...

Derive mathematical expressions that predict the effluent concentration of the batch reactor, completely mixed flow reactor, and plug flow reactor.

Chemists use plots of solubility of a slightly soluble salt (y-axis) versus concentration of some other...

Chemists use plots of solubility of a slightly soluble salt (y-axis) versus concentration of some other reagent(x-axis) to describe solubility behavior. Sketch plots labeling the axes for the following situations: A: the solubility of BaCO3 as HNO3 is added B: the solubility of BaCO3 as Na2CO3 is added C: the solubility of BaCO3 as NaNO3 is added

Reaction Rates: Predicting Changes in Concentration We can often predict the change in concentration for some...

Reaction Rates: Predicting Changes in Concentration We can often predict the change in concentration for some component in the reaction by watching how another species is changing. In the following reaction, molecules of the product are appearing at a faster rate than molecules of the reactant are being consumed. N2O4 (g) → 2 NO2 (g) This is why we scale the rate to the stoichiometry of the reaction. We can express the rate for a reaction with respect to any...

A tank contains 200 gal of water and 50oz of salt. Water containing a salt concentration...

A tank contains 200 gal of water and 50oz of salt. Water containing a salt concentration of 1/8(1+1/2 sint) oz/gal flows into the tank at a rate of 4 gal/min, the mixture flows out at the same rate. A) find the amount of salt in the tank at any moment. Q(t) = B) the amplitude of oscillation is C) level of the amplitude is

A microbial cell may be modeled as a well-mixed reactor in which nutrients (“corn steep liquor”)...

A microbial cell may be modeled as a well-mixed reactor in which nutrients (“corn steep liquor”) diffuse into the cell and are converted to products (including penicillin) which diffuse out of the cell. Write unsteady-state material balances on the nutrients (A) and on the products (B) in terms of the rate of consumption of A (rA), the yield of B (YB/A) defined as the mass of B produced per mass of A consumed, a mass-transfer coefficient (kA) for transport of...

The height of a piston, h, in inches, can be modeled by the equation y = 2cos x + 5, where x represents the crank angle. Find the height of the piston when the crank angle is 55°.

An article suggests that substrate concentration (mg/cm3) of influent to a reactor is normally distributed with...

An article suggests that substrate concentration (mg/cm3) of influent to a reactor is normally distributed with μ = 0.40 and σ = 0.06. (Round your answers to four decimal places.) a. What is the probability that the concentration exceeds 0.60? b. What is the probability that the concentration is at most 0.30? c. How would you characterize the largest 5% of all concentration values? d. The largest 5% of all concentration values are above = mg/cm3.

Question