Question

In: Physics

A helium-filled balloon is attached to one en of a uniform wooden beam, lifting it partially...

A helium-filled balloon is attached to one en of a uniform wooden beam, lifting it partially up off of the ground. The beam is 2.25 meters long and it weighs 578N. What Volume of helium is required to hold the beam up at an angle of 30.00 ? (You can ignore the weight of the empty balloon and the wire connecting it to the beam.)

Solutions

Expert Solution

First, find the buoyant force

Refer the figure

-------------

==========================

Take moment about O

================

Consider the ballon

The buoyant force is acting upwards

Weight of the helium is acting downwards

Tension on the string is acting downwards

Tension + Weight of helium = Buoyant force

ANSWER:

==============================


Related Solutions

A 3.0 g latex balloon is filled with 2.8 g of helium. When filled, the balloon...
A 3.0 g latex balloon is filled with 2.8 g of helium. When filled, the balloon is a 32-cm-diameter sphere. When released, the balloon accelerates upward until it reaches a terminal speed. What is this speed? Assume an air density of 1.2 kg/m3 and a drag coefficient for sphere of 0.47.
A spherical balloon has a radius of 6.95m and is filled with helium.
A spherical balloon has a radius of 6.95m and is filled with helium. The density of helium is 0.179 kg/m3, and the density of air is 1.29 kg/m3. The skin and structure of the balloon has a mass of 960kg. Neglect the buoyant force on the cargo volume itself. Determine the largest mass of cargo the balloon can lift.
An empty rubber balloon has a mass of 0.0105 kg. The balloon is filled with helium...
An empty rubber balloon has a mass of 0.0105 kg. The balloon is filled with helium at a density of 0.181 kg/m3. At this density the balloon is spherical with a radius of 0.300 m. If the filled balloon is fastened to a vertical line, what is the tension in the line?
Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally...
Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally to a wall that can only support a vertical load ( The horizontal component of the force of the wall on the beam is identically zero). There is a chandelier (mass = 40 kg) hanging at a distance = 4.21 meter from the end of the beam that is attached to the wall. There is a vertical cable hanging down from the ceiling that...
A balloon is filled up completely with helium gas and left in a room with a...
A balloon is filled up completely with helium gas and left in a room with a controlled temperature of 230C. After two days of being in the same room, the balloon was found to have shrunk to half its filled-up size. However, there was no leakage of helium gas from the balloon during the two days. Explain what happened to the pressure inside the balloon due to the change in the size of the balloon. ?  Use Boyle's Law to explain...
Consider a helium balloon, attached by a string to the floor inside a car. If the...
Consider a helium balloon, attached by a string to the floor inside a car. If the car is speeding up, will the balloon be leaning forward or backward – or not be leaning at all? Explain your answer using Einstein's Principal of Equivalence.
A 100 kg uniform beam is attached to a vertical wall at one end and is...
A 100 kg uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. Calculate the magnitude of the vertical component of the force that the wall exerts on the left end of the beam if the angle between the cable and horizontal is θ = 43°. The angle between the horizontal and the beam is 30 degrees.
A weather balloon filled with helium is launched at sea level in California on a clear...
A weather balloon filled with helium is launched at sea level in California on a clear day when the temperature is 34 oC and the atmospheric pressure is 758 torr (recall 760 torr = 1 atm). What is the density of the gas in grams/Liter?
A helium-filled balloon has a volume of 0.010 m3. The temperature in the room and in...
A helium-filled balloon has a volume of 0.010 m3. The temperature in the room and in the balloon is 20 C What are the average speed of a particle of helium inside the balloon? What is the thermal energy of the helium in the balloon? Assume that due to stretching of the balloon the pressure inside it is 1.1 atm.
A balloon filled with 2.00 L of helium initially at 1.25 atm of pressure rises into...
A balloon filled with 2.00 L of helium initially at 1.25 atm of pressure rises into the atmosphere. When the surrounding pressure reaches 330. mmHg, the balloon will burst. If 1 atm = 760. mmHg, what volume will the balloon occupy in the instant before it bursts?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT