Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in...

Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is 1.80 ✕ 10⁵ Pa and the pipe radius is 2.90 cm. At the higher point located at

y = 2.50 m,

the pressure is 1.30 ✕ 10⁵ Pa and the pipe radius is 1.60 cm.

1. find the speed flow for lower section

2. find the speed of flow in the upper section

3. find the volume flow rate through the pipe

Solutions

Expert Solution

Use equation of continuity and Bernoulli’s principle to find the required speed and rate of flow as shown below

***********************************************************************************************
This concludes the answers. If there is any mistake or omission, let me know in the comments immediately and I will fix it....

genius_generous answered 1 week ago

Next > < Previous

Related Solutions

Water moves through a constricted pipe in steady, ideal flow. The pressure is 1.80 ✕ 105...

Water moves through a constricted pipe in steady, ideal flow. The pressure is 1.80 ✕ 105 Pa and the pipe radius is 2.90 cm. At the higher point located at y = 2.50 m, the pressure is 1.30 ✕ 105 Pa and the pipe radius is 1.60 cm. (a) Find the speed of flow in the lower section. m/s (b) Find the speed of flow in the upper section. m/s (c) Find the volume flow rate through the pipe. m3/s

A brine solution with a density of 1230 kg/m3 moves through a constricted pipe in steady,...

A brine solution with a density of 1230 kg/m3 moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is P1 = 2.00 ✕ 104 Pa, and the pipe diameter is 7.00 cm. At another point y = 0.40 m higher, the pressure is P2 = 1.25 ✕ 104 Pa and the pipe diameter is 3.50 cm. (a) Find the speed of flow (in m/s) in the lower section. (b)...

Water is flowing down through the pipe shown in the drawing. Point A is at the...

Water is flowing down through the pipe shown in the drawing. Point A is at the higher elevation, while B and C are at the same elevation. The cross-sectional areas are the same at A and B. Rank the pressures at the three points, largest first. C has a larger diameter than the other two.

1. If an ideal solution of the flow field through a nozzle is shown with a...

1. If an ideal solution of the flow field through a nozzle is shown with a depiction of vectors distributed at points throughout the nozzle that illustrate the magnitude and direction of steady flow through those points, this depiction would be Eulerian or Lagrangian (circle one) 2. If an ideal solution of the flow field through a nozzle is shown with a depiction of vectors attached to particles moving through the nozzle, changing magnitude and direction as they move through...

a) Water (Densitywater = 1,000 kg/m3) flows through a pipe that narrows. At point A it...

a) Water (Densitywater = 1,000 kg/m3) flows through a pipe that narrows. At point A it is determined that the water flows with a velocity of VA = 93 m/s. At point B it is determined that the water flows with a velocity of VB = 193 m/s.What is the nagnitude of the difference in pressure between points A and B. b) Two trains pass each other. Train A is traveling 36 m/s east. Train B is traveling 23 m/s...

A water is flowing through a circular varying diameter pipe. The water completely fills the pipe...

A water is flowing through a circular varying diameter pipe. The water completely fills the pipe at all its sections. 1- What is the water velocity of the water at the first section if you know that the diameter of the pipe at this section= 22 cm and the water is flowing at a rate of 2.5 m3/s? 2- What is the diameter of the pipe at the second section if you know that the water velocity at this section...

The velocity profile for a steady laminar flow in a circular pipe of radius R is...

The velocity profile for a steady laminar flow in a circular pipe of radius R is given by u=u0(1−r2R2) . If the fluid density varies with radial distance r from the centerline as ρ=ρ0(1+rR)14 , where ρ0 is the fluid density at the pipe center, obtain and choose the correct relation for the bulk fluid density in the tube.

You are studying the laminar flow of water in a pipe at 20˚C. The pipe is...

You are studying the laminar flow of water in a pipe at 20˚C. The pipe is 2 cm in diameter, and the pressure gradient driving the flow is 0.8 Pa/m. Find the x-sectional average velocity (Poiseuille’s Law) and the maximum velocity achieved at the centerline of the pipe (use the equation for Umax presented in the alternative derivation of Poiseuille’s Law). How many times greater is the maximum velocity compared to the average velocity? Is this ū/umax ratio constant or...

A fluid travels through a pipe of cross-sectional area A1 then moves through a connection into...

A fluid travels through a pipe of cross-sectional area A1 then moves through a connection into another pipe of cross-sectional area A2. If A1 is larger than A2, the velocity of the fluid will ______. Group of answer choices A. increase B. decrease C. remain constant D. evaporate

The velocity profile for a steady laminar flow in a circular pipe of radius R given...

The velocity profile for a steady laminar flow in a circular pipe of radius R given be u=u0( 1- r^2/R^2). if the fluid density varies with radial distance r from the centerline as p=p0 ( 1+ r/R)^1/4 where p0 is the fluid density at the pipe center, obtain a relation for the bulk fluid density in the tube.

Subjects