------An analog signal is sampled, quantized, and encoded into a binary PCM wave. The number of...

------An analog signal is sampled, quantized, and encoded into a binary PCM wave. The number of representation levels used is 1024. A synchronizing pulse is added at the end of each code word representing a sample of the analog signal. The resulting PCM wave is transmitted over a channel of bandwidth 24kHz using a 8 PAM system with raised-cosine spectrum. The rolloff factor is 0.5.

(a) Find the rate (bit/s) at which information is transmitted through the channel.

(b) Find the rate at which the analog signal is sampled. What is the maximum possible value for the highest frequency component of the analog signal?

is using a 8 PAM system is different from using a quaternary PAM in this example ?????

thanks

Solutions

Expert Solution

Manojponduru answered 1 month ago

Next > < Previous

Related Solutions

3. For the following analog signal: xa(t) = 3sin(40πt) + 3cos(50πt) which is sampled at a...

3. For the following analog signal: xa(t) = 3sin(40πt) + 3cos(50πt) which is sampled at a rate of 100 samples/second. a. Design an IIR digital filter that will pass the first component 3sin(40πt) with attenuation of less than 1 dB and suppress the second component 3cos(50πt) at least 50 dB. The filter should be monotonic in the passband and have ripple in the stopband. b. Generate 500 samples of the sampled signal xa(t) at the given sampling rate and use...

3. For the following analog signal: xa(t) = 3sin(40πt) + 3cos(50πt) which is sampled at a...

3. For the following analog signal: xa(t) = 3sin(40πt) + 3cos(50πt) which is sampled at a rate of 100 samples/second. a. Design an IIR digital filter that will pass the first component 3sin(40πt) with attenuation of less than 1 dB and suppress the second component 3cos(50πt) at least 50 dB. The filter should be monotonic in the passband and have ripple in the stopband. ( 2 points ) b. Generate 500 samples of the sampled signal xa(t) at the given...

discuss how analog signal is converted to a digital signal in an analog to digital (A/D)...

discuss how analog signal is converted to a digital signal in an analog to digital (A/D) converter(ADC).you may use sketches to support your answer

Determine the coding efficiency of PCM max analog input f=4KHz, max decoded voltage at receiver =±4V,...

Determine the coding efficiency of PCM max analog input f=4KHz, max decoded voltage at receiver =±4V, Minimum dynamic range of 80Db

2. A digital signal processing system with analog audio signal input in the range of 0-20...

2. A digital signal processing system with analog audio signal input in the range of 0-20 Khz uses oversampling techniques and a second order sigma delta modulator to convert the analog signal into a digital bit stream at a rate of 3.072 Mhz. i) Explain how the digital bit stream may be converted in to a digital multibit stream for x(n). ii) Determine the overall improvement in signal to quantization noise ratio made possible by oversampling and noise shaping and...

A binary data stream 111010010 is to be transmitted using DPSK. Determine the encoded data and...

A binary data stream 111010010 is to be transmitted using DPSK. Determine the encoded data and phase of the DPSK o/p .

when sampling analog inputs, the input should be sampled at no more than twice the maximum...

when sampling analog inputs, the input should be sampled at no more than twice the maximum frequency of the signal being sampled.for an n bit analog to digital converter the input is converted to one of 2*n possible values (True or False?) Clarify

An analog signal, bandlimited to 20 Hz is corrupted by high-frequency noise. The spectrum of the...

An analog signal, bandlimited to 20 Hz is corrupted by high-frequency noise. The spectrum of the noise is from 25 Hz to 35 Hz. The noisy analog signal is sampled at 60 Hz. A digital lowpass filter is to be designed so as to remove the noise from the signal. Find the desired frequency response.

(a) For a ±10V digital-to-analog 10-bit converter, what is the analog equivalent of digital number 183?

(a) For a ±10V digital-to-analog 10-bit converter, what is the analog equivalent of digital number 183? (b) For a ±10V digital-to-analog 10-bit converter, what is the analog equivalent of digital number 1301? (c) For a 0 − 10V analog-to-digital 10-bit converter, what is the digital equivalent of an analog 2.355V? (d) For a ±5V analog-to-digital 12-bit converter, what is the digital equivalent of an analog 4.265V?

Design an analog-digital converter circuit with OpAmp that receives a 5 Vp sinusoidal signal and a...

Design an analog-digital converter circuit with OpAmp that receives a 5 Vp sinusoidal signal and a 3.5 V trip level as input. It must deliver a TTL (Low / High) signal as output.

Subjects