Question

In: Mechanical Engineering

discuss how analog signal is converted to a digital signal in an analog to digital (A/D)...

discuss how analog signal is converted to a digital signal in an analog to digital (A/D) converter(ADC).you may use sketches to support your answer

Solutions

Expert Solution

c

samet mamat answered 1 year ago
Next > < Previous

Related Solutions

2. A digital signal processing system with analog audio signal input in the range of 0-20...
2. A digital signal processing system with analog audio signal input in the range of 0-20 Khz uses oversampling techniques and a second order sigma delta modulator to convert the analog signal into a digital bit stream at a rate of 3.072 Mhz. i) Explain how the digital bit stream may be converted in to a digital multibit stream for x(n). ii) Determine the overall improvement in signal to quantization noise ratio made possible by oversampling and noise shaping and...
Design an analog-digital converter circuit with OpAmp that receives a 5 Vp sinusoidal signal and a...
Design an analog-digital converter circuit with OpAmp that receives a 5 Vp sinusoidal signal and a 3.5 V trip level as input. It must deliver a TTL (Low / High) signal as output.
Design an analog-digital converter circuit with OpAmp that receives a 5 Vp sinusoidal signal and a...
Design an analog-digital converter circuit with OpAmp that receives a 5 Vp sinusoidal signal and a 3.5 V trip level as input. It must deliver a TTL (Low / High) signal as output.
Analog-to-Digital convertor, modified. Assume that you have a 12-bit A/D converter that can digitize an analog...
Analog-to-Digital convertor, modified. Assume that you have a 12-bit A/D converter that can digitize an analog voltage over the range of 0.00 Volts to + 3.30 Volts (just like the one in the TM4C123G). (a) What is the minimum voltage that an analog input voltage could change and be guaranteed to be detected by a change in the digital output value? E.g. in millivolts or microvolts. (b) What is the binary number that represents an analog voltage of +1.11 volts?...
Almost all FM radio stations transmit digital FM signal. Explain how the fully analog FM has...
Almost all FM radio stations transmit digital FM signal. Explain how the fully analog FM has been converted to fully digital FM.
(a) For a ±10V digital-to-analog 10-bit converter, what is the analog equivalent of digital number 183?
  (a) For a ±10V digital-to-analog 10-bit converter, what is the analog equivalent of digital number 183? (b) For a ±10V digital-to-analog 10-bit converter, what is the analog equivalent of digital number 1301? (c) For a 0 − 10V analog-to-digital 10-bit converter, what is the digital equivalent of an analog 2.355V? (d) For a ±5V analog-to-digital 12-bit converter, what is the digital equivalent of an analog 4.265V?
A GDP analog that can't be converted to GTP was added to a cell. The GDP...
A GDP analog that can't be converted to GTP was added to a cell. The GDP analog otherwise behaves the same as authentic GDP. When g-proteins bind to the GDP analog, they are inactive, just like when they bind authentic GDP.  This cell has authentic GDP and plenty of GTP as well. What impact would this GDP analog have on the phosphoinositide (IP3) and growth factor pathways if it were bound to the g-proteins? Pick the best available answer. The g-proteins...
explain how digital data can be sent as analog singals over a medium
explain how digital data can be sent as analog singals over a medium
Why shift to digital television from analog? What are the shortcomings of analog TV and what...
Why shift to digital television from analog? What are the shortcomings of analog TV and what are some of the advantages of digital? The specifications of digital television are set by the ATSC. Who are they and how do they specify the transmission? Please explain fully.
A digital signal has four levels. How many bits are needed per level? Draw the digital...
A digital signal has four levels. How many bits are needed per level? Draw the digital signal assume the baud rate is 8 baud per second. Increasing the levels of a signal increases the probability of an error occurring, in other words it reduces the reliability of the system. Why and how can this be resolve? What determines how successful a receiver will be in interpreting an incoming signal? Spectrum of a channel between 5 MHz and 4 MHz; SNRdB...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT