Explain in details the relation between phase and line voltages and currents in a starconnected balanced...

Explain in details the relation between phase and line voltages and currents in a starconnected balanced positive sequence three-phase system. Use only one method of analysis.

Expert Solution

here is the answer of the above question :-

if you have any doubt please ask it in the comment and

please rate (give a thumbs up) if you are satisfied with the answer

thank you.

Manojponduru answered 8 months ago

A balanced positive-sequence wye-connected 60-Hz three-phase source has line-to-line voltages of VL = 440 V rms....

A balanced positive-sequence wye-connected 60-Hz three-phase source has line-to-line voltages of VL = 440 V rms. This source is connected to a balanced wye-connected load. Each phase of the load consists of a 0.5-H inductance in series with a 50-? resistance. Assume that the phase of Van is zero. A) Find the line-to-neutral voltage phasor Van. Enter your answer using polar notation. Express argument in degrees. B) Find the line-to-neutral voltage phasor Vbn. Enter your answer using polar notation. Express...

Suppose you are using a multimeter (one designed to measure a range of voltages, currents, and...

Suppose you are using a multimeter (one designed to measure a range of voltages, currents, and resistances) to measure current in a circuit and you inadvertently leave it in a voltmeter mode. What effect will the meter have on the circuit? What would happen if you were measuring voltage but accidentally put the meter in the ammeter mode?

Two balanced three phase loads are connected to a busbar with 10kV line voltage at 50Hz....

Two balanced three phase loads are connected to a busbar with 10kV line voltage at 50Hz. Load A is 168kVA at cosφ = 0,85 (lagging). Load B is connected in Y and draws a complex phase current ?? = 4,79∠ − 24,5°. Calculate the total active, reactive and apparent power at the busbar. Calculate the combined cosφ at the busbar. A third balanced load is connected to the busbar.The total power at the busbar is now 288kW, cosφ = 0,87...

Please explain these questions in details 1) Describe the technologies used today to measure ocean currents...

Please explain these questions in details 1) Describe the technologies used today to measure ocean currents and salinity/depth? How is in situ, and remotely sensed technologies combined to further the understanding of circulation patterns in the ocean basins? 2) What is coastal armament, and is it a viable and cost-effective method to "protect" coastlines?

A balanced three-phase delta-connected source has a line veltage of 120 V. It is connected to...

A balanced three-phase delta-connected source has a line veltage of 120 V. It is connected to a load via a three-wire transmission line. The per-phase impedance of the delta-connected load is 30 + 120j (2. The impedance of each wire of the transmission line is 2 + 4j 2. How much power is dissipated by the load? By the transmission line? What is the power factor of the load? What is the overall power factor?

Explain the recent proposals of an explicit balanced budget amendment in relation to PAYGO. What are...

Explain the recent proposals of an explicit balanced budget amendment in relation to PAYGO. What are the views of supporters and opponents of these proposals?

The relation between the unemployment rate and real wage (the wage-setting relation) can be shown by drawing a ______ line

QUESTION 4The relation between the unemployment rate and real wage (the wage-setting relation) can be shown by drawing a ______ line, with the unemployment rate measured on the x-axis and the real wage rate measured on the y-axis.a.negative slopingb.verticalc.horizontald.positive slopingQUESTION 5Efficiency wage theory suggests that __________.a.productivity might drop if the wage rate is too lowb.workers will be paid less than their reservation wagec.unskilled workers will have a lower turnover rate than skilled workersd.firm will be more resistant to wage increases...

A balanced three-phase delta-connected load is connected to a balanced three-phase delta-connected source via a transmission...

A balanced three-phase delta-connected load is connected to a balanced three-phase delta-connected source via a transmission line. The line-line voltage for the source is 100∟0° V/phase and the impedance of load is (27 + j18) Ω/phase. The transmission line has an impedance of (1 + j4) Ω/line. a) Draw the complete schematic of the power system showing the location of wattmeters. (Two-Wattmeter system is considered for this problem). Phase “a” could be considered as a reference phase. b) What must...

3. Illustrate the data processing cycle and explain each phase in relation to an Accounting Information...

3. Illustrate the data processing cycle and explain each phase in relation to an Accounting Information System with appropriate example at each stage. (25Marks)

Illustrate the data processing cycle and explain each phase in relation to an accounting information system...

Illustrate the data processing cycle and explain each phase in relation to an accounting information system with appropriate example at each stage. DATA -(INPUT)- Processing (storage)-Output- Information

Question