Question
In: Civil Engineering
Results obtained from a tension test on a bar of uniform cross section 10 mm x...
Results obtained from a tension test on a bar of uniform cross
section 10 mm x 10 mm
subjected to an axial pull of 8000 N were tabulated. The lateral
dimensions of the bar were found
to be changed to 9.9985 mm x 9.9985 mm while using a material
having modulus of rigidity equal
to 0.8 x 107 N/cm2. By determining the values for different moduli,
identify the properties of
material and establish the relationship between them. What changes
will happen to the volume if
the length of the bar is equal to 2.5 m? Based on the results
obtained discuss how the elastic
constants are related to the deformation of the bar?
Solutions
Expert Solution
Since there are some equations, I preferred a handwritten note. Results are tabulated in the answer for your easier understanding. Hope that it is clear for you and it really helped you.
If you are clear, please help me by rating it with a thumbs up.
In case of any doubt, please feel free to ask in the comment section. Thank you.
Ally Wells answered 10 months agoRelated Solutions
Results obtained from a tension test on a bar of uniform cross section 10 mm x...
Results obtained from a tension test on a bar of
uniform cross section 10 mm x 10 mm subjected to an axial pull of
8000 N were tabulated. The lateral dimensions of the bar were found
to be changed to 9.9985 mm x 9.9985 mm while using a material
having modulus of rigidity equal to 0.8 x 107 N/cm2. By determining
the values for different moduli, identify the properties of
material and establish the relationship between them. What changes
will...
Results obtained from a tension test on a bar of uniform cross section 10 mm x...
Results obtained from a tension test on a bar of uniform cross
section 10 mm x 10 mm subjected to an axial pull of 8000 N were
tabulated. The lateral dimensions of the bar were found to be
changed to 9.9985 mm x 9.9985 mm while using a material having
modulus of rigidity equal to 0.8 x 107 N/cm2. By determining the
values for different moduli, identify the properties of material
and establish the relationship between them. What changes will...
Results obtained from a tension test on a bar of uniform cross section 10 mm x...
Results obtained from a tension test on a bar of
uniform cross section 10 mm x 10 mm subjected to an axial pull of
8000 N were tabulated. The lateral dimensions of the bar were found
to be changed to 9.9985 mm x 9.9985 mm while using a material
having modulus of rigidity equal to 0.8 x 107 N/cm2. By determining
the values for different moduli, identify the properties of
material and establish the relationship between them. What changes
will...
2: Results obtained from a tension test on a bar of uniform cross section 10 mm...
2:
Results obtained from a tension test on a bar of uniform cross
section 10 mm x 10 mm subjected to an axial pull of 8000 N were
tabulated. The lateral dimensions of the bar were found to be
changed to 9.9985 mm x 9.9985 mm while using a material having
modulus of rigidity equal to 0.8 x 107 N/cm2. By determining the
values for different moduli, identify the properties of material
and establish the relationship between them. What changes...
A bar with an equilateral triangle cross section experienced a strain of 6.5983 x 10-4 due...
A bar with an equilateral triangle cross section experienced a
strain of 6.5983 x 10-4 due to an axial load of 2 kN. The
dimensions of the cross section is 5 mm and the length is 300 mm.
Assume that the poisson’s ratio is 0.28.
What is the value of the modulus of elasticity in GPa? Ans =
280 GPa
What is the value of the modulus of rigidity in GPa? Ans =
109.38 GPa
What is the bulk modulus...
Consider an electron beam of uniform circular cross-section with a diameter of 1 mm. The electrons...
Consider an electron beam of uniform circular cross-section with
a diameter of 1 mm. The electrons are accelerated from the cathode
to the anode, which are separated by 1 m. The electrons are
generated at the cathode and therefore have negligible velocity at
this position. The electrons accelerate at a rate of 108 ?/?2
between the cathode and anode. The current density at the anode is
104 ?/?2 .
Find the current density as a function of position between the...
A bar of n-type Si with a cross-sectional area of 1 mm x 1 mm and...
A bar of n-type Si with a cross-sectional area of 1 mm x 1 mm
and a length of 1 cm is connected to a 2 V battery and is carrying
a current of 2 mA at 300 K. (a) Calculate the thermal equilibrium
electron and hole concentrations in the bar. (b) Calculate the
dopant concentration assuming that only donors with energy level
0.148 eV away from the conduction band are present. (c) Determine
the temperature at which the bar...
A 2.8 mm -diameter copper wire carries a 31 Acurrent (uniform across its cross section). A)...
A 2.8 mm -diameter copper wire carries a 31 Acurrent (uniform
across its cross section).
A) Determine the magnetic field at the surface of the wire.
B) Determine the magnetic field inside the wire, 0.50 mm below
the surface.
C) Determine the magnetic field outside the wire 2.5 mm from the
surface.
10 cm of copper with square cross section of 1x1 cm exposed to 200 KN tension...
10 cm of copper with square cross section of 1x1 cm exposed to
200 KN tension force
caused 15% permanent reduction in cross section area , if
the fracture got on this point,
calculate the following:
1 – the ductility
2 – stress
3 – true stress
4- fracture stress
Lab Procedure The cross-section dimensions of the 6061-T6 aluminum bar are 0.512 in x 0.248 in....
Lab Procedure
The cross-section dimensions of the
6061-T6 aluminum bar are 0.512 in x 0.248 in.
Attach the lead wires of the gages to
the strain indicator as a quarter bridge circuit. (Note: the black
and white lead wires are the common leads.)
Enter the gage factor
(GF=2.11) into the strain indicator.
Record the specimen number (1, 2,
or 3).
Balance the strain indicator and note
the zero readings. Load the specimen according to the table below
and record the...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Young and Company claims that its pressurized diving bell will, on average, maintain its integrity to...
- 1) Alternative compiled code sequence using instructions in classes A, B, C. What is the average...
- An asset is purchased on January 1 for $48,700. It is expected to have a useful...
- Do we have any online or offline tool to convert c and cpp programs into MIPS...
- -what is the pH of HCl 0,1M and NaCl 0,1M mixed together solution? -What is the...
- function X=extractDWT(x_train,startS,endS,wStep,wRange) % x_train = input signal % startS = from second % endS = end...
- Do you agree that Social Loafing is similar to Theory X. Give an example to support...
ADVERTISEMENT