Using this table, please fill the table, draw the stress strain curve and then answer the...

Using this table, please fill the table, draw the stress strain curve and then answer the question.

In case where the load is released at point 1 and 2 Draw and show the permanent and the recovery deformations.

	0	1	2	3
Force	0 Kn	400 Kn	650 Kn	550 Kn
Length	2 cm	2.004 cm	2.036 cm	2.049 cm
Diameter	1 cm	0.9995 cm	0.998 cm	0.996 cm
∆L/L
∆d/d
ᵋx
ᵋz

Calculate the Yield stress in the wire

Calculate the apparent maximum stress in the wire

Calculate the apparent broken stress in the wire

Calculate its modulus of elasticity

Calculate the elastic deformation

Calculate the plastic deformation

Calculate its axial deformation e_z at the linear part

Calculate its radial deformation e_x at the linear part

Calculate its Poisson’s ratio at the linear part

Expert Solution

Ally Wells answered 9 months ago

What is the advantages and disadvantages of stress strain curve. Please solve it in easy way,...

What is the advantages and disadvantages of stress strain curve. Please solve it in easy way, clear writing so I can understand it.

Answer A- H please a) Draw a Supply Curve and the Demand Curve for the Sugar...

Answer A- H please a) Draw a Supply Curve and the Demand Curve for the Sugar Label the supply S1 and the demand D1. Label on the vertical axis P for the equilibrium price and label the horizontal axis Q for the equilibrium quantity. We currently have the sugar market in equilibrium at a price of $3 per pound and 100,000 pounds. Now assume that the state government just announced a new price floor program for the sale of sugar....

Answer A-I please (a) Draw a Supply Curve and the Demand Curve for the US Auto...

Answer A-I please (a) Draw a Supply Curve and the Demand Curve for the US Auto market. Label the supply S1 and the demand D1. Label the vertical axis P for Price and label the horizontal axis Q for Quantity of Milk. Label on the vertical axis the equilibrium price as P1. Label on the horizontal axis the equilibrium quantity as Q1. Assume now that a tariff of 25% is placed on on all steel and aluminum that is imported...

(Steps)Plot a stress-strain curve using Matlab(cross sectional area 30 mm^2) Force (kN) Strain 8.59E-02 0.000054 2.55E-01...

(Steps)Plot a stress-strain curve using Matlab(cross sectional area 30 mm^2) Force (kN) Strain 8.59E-02 0.000054 2.55E-01 0.000054 2.82E-01 0.000054 2.95E-01 0.000054 3.09E-01 0.000054 Step 1:Divide the applied force by the cross-sectional area to be able to get applied stress ?. Also, convert to MPa. 2. Graph the stress-strain curve with strain as the abscissa and stress as the ordinate. 3. Make sure to label the axes with the variable (? or ?) and the correct units. 4. Add a title....

Explain the stress- strain curve. Include the differences between the elastic and plastic region and how...

Explain the stress- strain curve. Include the differences between the elastic and plastic region and how does this relate to material components of the body like bones,ligaments/tendons.

Discuss stress and strain of materials in terms of Hooke's law. Please be detailed.

Please answer all questions, fill in table and show calculations. The table below shows the hypothetical...

Please answer all questions, fill in table and show calculations. The table below shows the hypothetical prices and quantities demanded of a software product. Assume that the fixed cost of setting up the production of software is $200 and the marginal cost is $5. Fill out the table by calculating the revenue, the marginal revenue, total cost, the marginal cost, and the profit. Give a general definition of price elasticity of demand. Explain the factors that make the demand of...

Q1. Describe mechanical properties of stress-strain behavior of a polymer and a plastic (contrast with stress-strain...

Q1. Describe mechanical properties of stress-strain behavior of a polymer and a plastic (contrast with stress-strain curves of ceramics and metals) Q2. Describe variation of elastic/relaxation modulus with temperature. Q3. Describe viscoelasticity and examples of a rubber/elastomer.

(c) Draw a schematic graph of resolved shear stress versus shear strain for a single crystal...

(c) Draw a schematic graph of resolved shear stress versus shear strain for a single crystal of a pure metal. Clearly label the point of the critical resolved shear stress and the three subsequent stages of dislocation behaviour. Describe these three stages. (d) Explain why the critical resolved shear stress is much lower than the theoretical strength, based on the force required to break atomic bonds within the structure.

DISCUSSIONS: 1. Draw a typical stress-strain diagram and indicate what are meant by peak strength and...

DISCUSSIONS: 1. Draw a typical stress-strain diagram and indicate what are meant by peak strength and residual strength . 2. What are the limitations of direct shear stress? 3. Draw the Mohr’s circle foe failure for a direct shear stress test and mark the failure plane, a major principle plain and minor principal plain. 4. If the test is under a normal stress of 2.5 kg/cm2 , find the shear load at which the soil will fail.(Use ? found from...

Question