Question
In: Civil Engineering
Q1) Designa concrete mixture proportions which will be used for offshore concrete platform.Norway is a world...
Q1) Designa concrete mixture proportions which will be used for offshore concrete platform.Norway is a world leader on offshore concrete platforms with 1aof the world’s 30 larger offshore concrete structures located on the Norwegian continental shelf. The first of these platforms where the Ekofisk Tank installed in 1974 and the last was Troll gravity based structure installed in 1996. The Sakhalin project is located in a harsh and artic environment where concrete structures have proven excellent characteristics with a minimum of maintenance. 80 mm slump value is required for the Sakhalin project. 28-days concrete characteristic strength is 2bMPa. It is required that no more than 1 test result in 100 will fall below the specified strength. The fine aggregate has a fineness modulus of 2.60 and Zone 3. For Coarse Aggregate (Uncrushed):SSD Bulk Specific Gravity: 2.65, Absorption Capacity: 2.b%, Total Moisture: 1.c% and Dry Rodded Unit Weight: 1345 kg/m3. For Fine Aggregate (Uncrushed):SSD Bulk Specific Gravity: 2.70, Total Moisture: 3.d% and Free Moisture: 2 %. Cement: Portland Composite Cement, Specific Gravity: 2.97. For 0.e5 m3of concrete, binder amount is calculated as 120 kg(Use ACI Method of Mix Design)
with a=7
b=4
c=4
d=4
e=1
Solutions
Expert Solution
Design of mix as per given specifications is shown below.
Ally Wells answered 9 months agoRelated Solutions
Q1) Designa concrete mixture proportions which will be used for offshore concrete platform.Norway is a world...
Q1) Designa concrete mixture proportions which
will be used for offshore concrete platform.Norway
is a world leader on offshore concrete platforms with 7 of the
world’s 30 larger offshore concrete structures located on the
Norwegian continental shelf. The first of these platforms where the
Ekofisk Tank installed in 1974 and the last was Troll gravity based
structure installed in 1996. The Sakhalin project is located in a
harsh and artic environment where concrete structures have proven
excellent characteristics with a...
Designa concrete mixture proportions which will be used for offshore concrete platform.Norway is a world leader...
Designa concrete mixture proportions which will be used for
offshore concrete platform.Norway is a world
leader on offshore concrete platforms with 1aof
the world’s 30 larger offshore concrete structures located on the
Norwegian continental shelf. The first of these platforms where the
Ekofisk Tank installed in 1974 and the last was Troll gravity based
structure installed in 1996. The Sakhalin project is located in a
harsh and artic environment where concrete structures have proven
excellent characteristics with a minimum of...
Problem 2: Initial mixture proportions for a concrete with the following requirements and properties is needed:...
Problem 2:
Initial mixture proportions for a concrete with the following
requirements and properties is needed:
28 Day Design Strength = 4000 psi
It is for a parking lot deck and columns, so it is not in contact
with sulfates from soil or saltwater
Slump should be 4”
Aggregate properties are:
Coarse Fine
SGSSD 2.60 2.55
Absorption (%) 0.8% 1.9%
Fineness Modulus N/A 2.90
Nominal Size ¾” x #8 N/A
Dry Rodded Unit Weight (lbs/ft3) 91.3 N/A
Description Rounded Gravel...
A sample contains a mixture of 239Pu and 240Pu in unknown proportions. The activity of the...
A sample contains a mixture of 239Pu and
240Pu in unknown proportions. The activity of the mixed
sample was found to be 4.35 x 107 dpm for a sample of
0.125 mg of Pu. Calculate the weight % of each Pu isotope
present
Q1 Which of the following are NOT tests which are used to assess the performance of...
Q1
Which of the following are NOT tests which are used to assess
the performance of astabilization or solidification process?
a. corrosion test b. EP TOX c. paint filter test d. TCLP
Q2
Given that you receive a dose of radiation of 1 milli-rad, the
highest tissue damage wouldresult if the radiation adsorbed was in
the form of:
a. Alpha b. Beta c. Gamma d. X-rays e. all the same
Q3
When a radioactive isotope decays by emission of an...
Q1: Define creep in concrete? Distinguish it from elastic deformation. Q2: Discuss the rate of concrete...
Q1: Define creep in concrete? Distinguish it from elastic
deformation.
Q2: Discuss the rate of concrete drying shrinkage at different
ages.
Q3: Explain the positive aspects of bleeding on concrete.
Q4: Explain the effects of size and grading of aggregates on
workability of concrete?
Q5: Differentiate between additives and admixtures with
examples.
Q6: Explain the working mechanism of retarders, plasticizers and
air entrained
admixtures.
Q7: Define volume and weigh batching of concrete? Explain with
examples.
Q8: Differentiate between continuous and...
A 1.000-L vessel contains a mixture of hydrogen, carbon monoxide and methane gases in unknown proportions...
A 1.000-L vessel contains a mixture of hydrogen, carbon monoxide
and methane gases in unknown proportions at 20.9-bar and 25 °C. The
gaseous mixture is found to have a mass of 13.10-g and a higher
heating value of 414.10 kJ/mol. What is the composition of the
gas?
yH2=
yCO=
yCH4= .2
A 1.000-L vessel contains a mixture of hydrogen, carbon monoxide and methane gases in unknown proportions...
A 1.000-L vessel contains a mixture of hydrogen, carbon monoxide
and methane gases in unknown proportions at 23.3-bar and 25 °C. The
gaseous mixture is found to have a mass of 13.70-g and a higher
heating value of 494.90 kJ/mol. What is the composition of the
gas?
Why concrete mix proportions need to be designed? After completing the design mix process, explain what...
Why concrete mix proportions need to be
designed? After completing the design mix process,
explain what are the next steps to be done?
If the same concrete mix proportions calculated in
(a) is to be used for application near marine environment or in
heavy industrial area, suggest with justification
the possible modification that can be
done.
Design a concrete mixture that has a 28 day compressive strength of 4000 psi and a...
Design a concrete mixture that has a 28 day compressive strength
of 4000 psi and a maximum size aggregate of 0.75 in. The concrete
would be placed in a column exposed to freezing and thawing and
will be in contact with a soil that has a sulfate content of
0.3%.
Step 1: Assemble information from specifications and
local materials
Cement:
Use any type and assume a specific gravity of 3.15
Coarse Aggregate:
Bulk Specific Gravity (BSG) – 2.65
Absorption Capacity...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- In the article from Forbes notes that the goal of a leader is not to clone...
- Many people keep time using a 24 hour clock (11 is 11am and 23 is 11pm,...
- UNIX ONLY -- DIFFICULT LAB ASSIGNMENT This is an extremely difficult subject for me. Could you...
- Do you know why your credit card can be refused even though you are profitable?
- The Following Java expression: S/10 * 10 + 10 – S = C Show that this...
- Year Cash Flow 0 −$9,700 1 5,800 2 2,500 3 3,400 &nb
- In a two – story building, an exterior column is to be designed for a service...
ADVERTISEMENT