Make the curvature radius 0.6 , the refractive index 1.5, and the diameter 0.6 . Place...

Make the curvature radius 0.6 , the refractive index 1.5, and the diameter 0.6 . Place the lamp so that the source of light is 120  from the middle of the lens (use the ruler).
The focal length of the lens is ____________, and the focal plane is ___________ from the lens.
     120 cm / 120 cm
     60 cm / 120 cm
     60 cm / 60 cm
     30 cm / 120 cm
     60 cm / 180 cm

SubmitHintsMy AnswersGive UpReview Part
Correct
For this lens, when the object is 120 cm away, the image is the same distance on the other side of the lens.

Part H

Now, move the lamp so that it is 90  from the center of the lens.
How far from the lens is the image?
     60 cm
     90 cm
     180 cm
     120 cm
     160 cm

Solutions

Expert Solution

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

A single glass lens has a refractive index of 1.5 and radii of curvature R1=5cm and...

A single glass lens has a refractive index of 1.5 and radii of curvature R1=5cm and R2=-5cm. Write down the analytical and numerical system matricies for the lens. Comparing these matricies, what is the focal length of the lens?

A 3.0 cm thick lens with a refractive index of 1,650, has radii of curvature r1...

A 3.0 cm thick lens with a refractive index of 1,650, has radii of curvature r1 = + 5.0 cm and r2 = -15.0cm. If you considered it as a thick lens, what would be its focal length and what would its power? Find the positions of the main points and the focal points. Find the front focal length and the rear focal length. If the second surface is silver, what is the power? And the focal length of the...

a step-index optical fiber with a core diameter of 80μm has a relative refractive index difference...

a step-index optical fiber with a core diameter of 80μm has a relative refractive index difference of 1.5% with a core refractive index of 1.48 at a wavelength of 850nm. how many modes in the optical fiber?

Consider a beam of light passing from air into glass (refractive index 1.5) at an angle...

Consider a beam of light passing from air into glass (refractive index 1.5) at an angle of 30 degrees from vertical. Calculate - The angle of the reflected light - The angle of the refracted light - The intensity of the reflected light - The intensity of the refracted light

4. Liquid A has a refractive index of 1.415 and liquid B has a refractive index...

4. Liquid A has a refractive index of 1.415 and liquid B has a refractive index of 1.524. A solution is prepared by mixing liquid A with liquid B. If the refractive index of the resulting solution is 1.457, does the solution have more of liquid A or more of liquid B? What is the % Liquid A in the mixture?

For the next question, note that benzene has a refractive index of 1.6, and air has a refractive index of 1.0.

For the next question, note that benzene has a refractive index of 1.6, and air has a refractive index of 1.0.A plano-concave lens made of crown glass of refractive index 1.5 will beGroup of answer choicesa converging lens in both benzene and air.a diverging lens in both benzene and air.a converging lens in benzene but a diverging lens in air.a diverging lens in benzene but a converging lens in air.none of the above.

Light enters medium 2 from medium 1 whose refractive index is 1.5 at an angle of incidence of 50

Light enters medium 2 from medium 1 whose refractive index is 1.5 at an angle of incidence of 50. If the angle of refraction in medium 2 is 25, calculate the refractive index of medium 2.4.0424.3610.3542.7191.243When light enters a medium of refractive index 1.1from a medium of refractive index 2, for whichof the following angle of incidence would bothreflection and refraction take place? 36.4931.22637.60135.49934.802

Describe the effect of the radius of curvature of a conductor on the concentration of charges

why the refractive index is a good way to analyze the liquid?

An upright object is placed in front of a concave mirror. The radius of curvature of...

An upright object is placed in front of a concave mirror. The radius of curvature of mirror is 40 cm. (a) Where should the object be placed in order to obtain an image that is twice as large as the object? (b) Is the image upright or inverted? SHOW ALL STEPS & DIAGRAM

Subjects