Question

In: Electrical Engineering

A radio receiver operating at 477MHz with minimum sensitivity of -85dBm is connected to an antenna...

A radio receiver operating at 477MHz with minimum sensitivity of -85dBm is connected to an antenna with gain +12dBi using a feeder cable with loss of -3dB.The transmitter is 40Km away and uses a parabolic antenna with gain of +23dBi. The transmitter feeds the antenna through a coaxial cable with -6dB loss. What is the minimum transmitter power required for reliable operation of the link assuming a fade margin of 10dB?

Solutions

Expert Solution


Related Solutions

Write a conclusion for radio transmitter and receiver
Write a conclusion for radio transmitter and receiver
Is that possible, for any antenna, to be used as a receiver and transmitter? What is...
Is that possible, for any antenna, to be used as a receiver and transmitter? What is the point of that?
A radio antenna broadcasts a 1.0 MHz radio wave with 29.0 kW of power. Assume that...
A radio antenna broadcasts a 1.0 MHz radio wave with 29.0 kW of power. Assume that the radiation is emitted uniformly in all directions. What is the wave's intensity 25.0 km from the antenna? The answer is 3.69×10−6 W/m^2 What is the electric field amplitude at this distance?
Two radio antennas A and B radiate in phase at a frequency of 15 MHz. Antenna...
Two radio antennas A and B radiate in phase at a frequency of 15 MHz. Antenna B is 115 m to the right of antenna A. Consider point Q along the line connecting the antennas, a horizontal distance x to the right of antenna A. A.)What is the smallest nonzero value of x for which there will be constructive interference at point Q? Express your answer in meters to two significant figures. B.) What is the smallest nonzero value of...
Assume you have a completely “dead” radio receiver with no visually defective components. What is the...
Assume you have a completely “dead” radio receiver with no visually defective components. What is the next troubleshooting step? What is meant by “milking the front panel”? What is the purpose of a “load” instrument in troubleshooting? What is a good source for documentation on consumer equipment such as televisions, VCRs, and entertainment equipment?
An antenna consumes 100W of electrical energy, all of which is converted to radio waves emitted...
An antenna consumes 100W of electrical energy, all of which is converted to radio waves emitted equally in all directions. a) What is the magnitude of the Poynting vector 1km away from the source? b) A 1m by 1m panel that absorbs all radio waves going through is held facing the source,, 1km away from it, during 1 minute. How much energy does it receive from the source? c) Answer b) if the panel is tilted 45°.
In many land based radar installations, a rotating antenna sweeps a radio beam around the sky....
In many land based radar installations, a rotating antenna sweeps a radio beam around the sky. But in a phased-array radar system, the antennas remain stationary and the beam is swept electronically. To see how this is done, consider two radio antennas, both on the y-axis, separated by a distance d, emitting coherent radiation with equal amplitude Eo and wavelength ?. If the radio signal emitted by these two antennas are in phase, they will create an interference pattern at...
The emitting antenna of a 100-kW radio station radiates equally in all directions. Part A What...
The emitting antenna of a 100-kW radio station radiates equally in all directions. Part A What is the magnitude Emax 600 m from the antenna? Express your answer to two significant digits and include the appropriate units. Emax = Part B What is the magnitude Bmax 600 m from the antenna? Express your answer to two significant digits and include the appropriate units. Bmax = Part C For the distance of 600 m from the antenna, calculate the maximum potential...
Radio Antenna: how waves are created, through what mediums, and what types of waves (longitudinal or...
Radio Antenna: how waves are created, through what mediums, and what types of waves (longitudinal or transverse) -how different frequencies, wavelengths, and amplitudes of waves affect the results. -If constructive/destructive interference occurs. -Most importantly - how resonance plays a part. -Other interesting info. 200 words
An automobile has a vertical radio antenna 1.10 m long. The automobile travels at70.0 km/h on...
An automobile has a vertical radio antenna 1.10 m long. The automobile travels at70.0 km/h on a horizontal road where the Earth's magnetic field is 50.0 µT, directed toward the north and downwards at an angle of 65.0° below the horizontal. (a) Specify the direction the automobile should move in order to generate the maximum motional emf in the antenna, with the top of the antenna positive relative to the bottom. (b) Calculate the magnitude of this induced emf.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT