Question

In: Civil Engineering

QUESTION ONE: CASE STUDY Title: Municipal Solid Waste Management in the Kanzo Metropolitan Area, Sikaman Kanzo...

QUESTION ONE: CASE STUDY
Title: Municipal Solid Waste Management in the Kanzo Metropolitan Area, Sikaman
Kanzo is a metropolitan area in Sikaman, a least developed country in West Africa, which has experienced rapid urbanisation over the past six decades. The population of Kanzo in 1965 was 45,000, which tripled in two decades, and further reached 1.2 million in the year 2005. The National Development Planning Council (NDPC), headquartered in Kanzo has estimated that the city’s population surpassed the threshold of 5 million in 2019. City authorities have become worried, considering the current rate of urbanisation pegged at 3 percent per annum. The population growth coupled with the rapid expansion of the city has resulted in an urban sprawl and uncontrolled expansion from the adjourning municipalities. Also, there has been an increased crowding resulting in higher occupancy ratios in existing housing units, and the infilling of vacant plots in existing residential areas. According to the NDPC, over 70 percent of the population of Kanzo live in low income, high density population areas which account for many of the slums in the city and its peripheral environs.
Kanzo generates over 3,000 tons of solid waste per day and only about 60 percent is collected by the waste management organisations contracted through a public private partnership (PPP) arrangement. Of these, the organic waste, made up of kitchen waste including food leftovers, rotten fruits, vegetables, leaves, crop residues, animal excreta and bones constitute 65-70% whiles industrial waste made up of plastics, glass, metals, and paper account for the remaining 30-35%. The high organic and moisture contents left in the open at prevailing high temperatures require frequent removals, which place additional burden on an over strained collection system. Experts have warned that the delays and inefficiencies in the solid waste collection system in Kanzo, is what has accounted for the high incidence of cholera, typhoid fever, malaria, and other health hazards witnessed in the metropolis. Especially in low income areas where the waste is not segregated but mixed due to inadequate sanitation facilities, the problem becomes more compounded.
The lack of proper land use planning in Kanzo, also hinders effective sanitation and waste management practices. As reported in the April 9, 2019 edition of the Daily Mail Newspaper, the lack of comprehensive planning, the absence of planning controls, week enforcement of bye-laws, indiscipline, difficulty to apply service charges, limited number of waste management organisations, and the lack of an adequate and well maintained infrastructure in the urban, and industrial development processes is responsible Kanzo’s environmental problems. The publication further outlines that the poor layouts, untarred and narrow nature of the road networks particularly in slums, make it difficult for waste collection vehicles to reach some parts of the city compound the situation. This uncontrolled urbanisation has resulted in an increase in the average travel distance to be covered by collection vehicles and additional cost to waste management.
In January, 2020, resident associations from all sub-metropolitan areas of Kanzo staged a mammoth demonstration at the city centre and presented a petition to the Office of the Mayor of Kanzo, Dr. E.M Hygiene, to express their concerns on the unsustainable manner and poor solid waste management system, as well as the environmental risks associated with the practice.
REQUIRED:
i. Identify any four (4) major causes of the poor solid waste management and sanitation problems
confronting the Kanzo Metropolitan Area.

Solutions

Expert Solution


Related Solutions

QUESTION ONE: CASE STUDY Title: Municipal Solid Waste Management in the Kanzo Metropolitan Area, Sikaman Kanzo...
QUESTION ONE: CASE STUDY Title: Municipal Solid Waste Management in the Kanzo Metropolitan Area, Sikaman Kanzo is a metropolitan area in Sikaman, a least developed country in West Africa, which has experienced rapid urbanisation over the past six decades. The population of Kanzo in 1965 was 45,000, which tripled in two decades, and further reached 1.2 million in the year 2005. The National Development Planning Council (NDPC), headquartered in Kanzo has estimated that the city’s population surpassed the threshold of...
QUESTION ONE: CASE STUDY Title: Municipal Solid Waste Management in the Kanzo Metropolitan Area, Sikaman Kanzo...
QUESTION ONE: CASE STUDY Title: Municipal Solid Waste Management in the Kanzo Metropolitan Area, Sikaman Kanzo is a metropolitan area in Sikaman, a least developed country in West Africa, which has experienced rapid urbanisation over the past six decades. The population of Kanzo in 1965 was 45,000, which tripled in two decades, and further reached 1.2 million in the year 2005. The National Development Planning Council (NDPC), headquartered in Kanzo has estimated that the city’s population surpassed the threshold of...
what are the Municipal solid waste management strategies?and industrial waste management strategies ?
what are the Municipal solid waste management strategies?and industrial waste management strategies ?
Course: CIVE 4309: SOLID WASTE MANAGEMENT Subject: Case study landfill area and state fully the operational...
Course: CIVE 4309: SOLID WASTE MANAGEMENT Subject: Case study landfill area and state fully the operational method that applies to chosen landfill The slide presentation must have: 1) The definition of landfill 2) Background of the chosen landfill 3) Landfill operation should include: 1) Landfill layout and design 2) Landfill operation and management (include the diagram) 3) The reaction occur in the landfill 4)The management of leachate o Environmental monitoring (Gas monitoring) 5) Landfill closure Assessment based on the rubric...
Describe the operation of a MRF (Material Recovery Facility) to process Municipal Solid Waste (Refuse) for...
Describe the operation of a MRF (Material Recovery Facility) to process Municipal Solid Waste (Refuse) for the recycling of PETE, HDPE; Glass and Metals. Include a flow diagram of the process.
A metropolitan area is facing a serious problem with disposing of its waste. Its current landfill...
A metropolitan area is facing a serious problem with disposing of its waste. Its current landfill is almost full and it is looking for other sites that can fulfill its likely future needs. A landfill must not only be large enough to handle the weekly needs of the region, but has to be as environmentally benign as possible. This means that the types of materials that are placed in the landfill must not exceed certain threshold limits. And of course,...
1. Discuss potential negative effects of Municipal Solid Waste. 2. Discuss the importance of managing the...
1. Discuss potential negative effects of Municipal Solid Waste. 2. Discuss the importance of managing the quantity of Municipal Solid Waste generated. 3. Discuss the best method of Municipal Solid Waste quantity estimation and supply an appropriate relationship with explanation of variables. 4. In the landfill classification system, a landfill is classified in terms of three characteristics, all of which influence the risk it poses to the environment. Describe these characteristics. 5. Leachate is a widely used term in the...
2 a) Draw a neat sketch of Hauled Container System. b) Municipal solid waste from the...
2 a) Draw a neat sketch of Hauled Container System. b) Municipal solid waste from the Al-Khuwair area is to be collected in hauled containers in conjunction with stationary compactors. It is estimated that the average time to drive from garage to the first container location (t1) and from the last container F/QAP/021/001 2 location to the garage (t2) each day will be 20 min and 25 min respectively. If the average time required to drive between the containers is...
case study of the control of management by Kenneth A. Merchant, Harvard University. question one Merchant...
case study of the control of management by Kenneth A. Merchant, Harvard University. question one Merchant discusses specific action, results, and personnel controls. provide three examples of each. can organisations focus on just one major type of control method (e.g. action controls)? endnotes case study 2.2a what is a strategy map? 2.2b according to Kaplan and Norton, what are the two basic approaches to increasing economic value 2.3 describe the five principles of a strategy _focused organisation
· Identify the role of each of the following components of a solid waste management system:...
· Identify the role of each of the following components of a solid waste management system: 1) collection, 2) transfer stations, 3) recycling, 4) composting, 5) landfills, 6) landfill closure. · What is the hierarchy of the integrated solid waste management practice? · Why recycling is important and what can be recycled? · Sketch a Subtitle D municipal waste landfill. How a Subtitle D landfill is different from a bioreactor that is operated at the Columbia landfill facilities? · Sketch...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT