Question

In: Civil Engineering

What will be the shear force diagram and bending moment diagram for this question if the...

What will be the shear force diagram and bending moment diagram for this question if the P is 4.0kN instead of 3.6kN?

https://www.chegg.com/homework-help/cantilever-timber-beam-loads-span-shown-select-economical-re-chapter-13-problem-23P-solution-9780135034521-exc

Thanks.

Solutions

Expert Solution

Shear force and bending moment equations---

Ally Wells answered 6 months ago
Next > < Previous

Related Solutions

Describe the procedure of obtaining Shear force diagram and Bending Moment diagram of simply supported beam....
Describe the procedure of obtaining Shear force diagram and Bending Moment diagram of simply supported beam. Take an example of beam with load of your choice. Also illustrate the significance of these diagrams for design of a beam in practical life.
Determine the reactions at the support of the beam. Shear force and bending moment for the...
Determine the reactions at the support of the beam. Shear force and bending moment for the beam are described by V(x)= c0 + c1x + c2x2 and M(x)= k0 + k1x + k2x2 + k3x3, respectively. Calculate the coefficients for the shear force and bending moment equations. Use L = 5.8 m, q = 2.7 N/m, and w = 8.6 N/m for your calculation. Also, determine Vertical reaction force at A in N (upwards force is positive, round your result...
Q2: For analyzing a structure, shear force and bending moment diagrams were plotted for a simply...
Q2: For analyzing a structure, shear force and bending moment diagrams were plotted for a simply supported beam of span 8 m when subjected to a uniformly distributed load of ‘w’ kN/m over a length of 4 m from the left end support, a point load ‘2.4 w’ kN at a distance 6 m from the left end support and another uniformly distributed ‘0.6 w’ kN/m at a distance 2 m from the right end support. It was noted that...
shear and bending moment drawing for mechanical of materials.
shear and bending moment drawing for mechanical of materials.
Draw the enveloped shear diagram and enveloped moment diagram for a simply supported beam with a...
Draw the enveloped shear diagram and enveloped moment diagram for a simply supported beam with a uniform dead load of 1.00kip/ft, a uniform live load of 1.50kip/ft and a concentrated live load of 175 kip. the dead load is applied to te entire span. the live load may be positioned anywhere on the span.
Explain how the load conditions related to shear diagram, and how shear conditions related to moment...
Explain how the load conditions related to shear diagram, and how shear conditions related to moment diagram.
What is the load capacity of a beam in bending and define the internal bending moment...
What is the load capacity of a beam in bending and define the internal bending moment from which this capacity depends. (draw e sketch to illustrate this relationship)
Fixed load bending moment MD = 130 kN·m, live load bending moment ML = 140 kNNm...
Fixed load bending moment MD = 130 kN·m, live load bending moment ML = 140 kNNm Rectangular short beams with width b = 400 mm and depth h = 600 mm are designed as follows: Determine design suitability. Assume the coating thickness is 40 mm.(f ck = 27 MPa, f y = 300 MPa , tensile reinforcement 6-D22, shear reinforcement D10)
Fixed load bending moment MD = 130 kN·m, live load bending moment ML = 140 kNNm...
Fixed load bending moment MD = 130 kN·m, live load bending moment ML = 140 kNNm Rectangular short beams with width b = 400 mm and depth h = 600 mm are designed as follows: Determine design suitability. Assume the coating thickness is 40 mm.(f ck = 27 MPa, f y = 300 MPa , tensile reinforcement 6-D22, shear reinforcement D10)
What is the formula for maximum deflection and maximum bending moment of a simply support and...
What is the formula for maximum deflection and maximum bending moment of a simply support and cantilever beam that carry a uniformly varying load?
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT