11. A synthetic gas generated from coal has the following composition CO2- 7.2%; CO- 24.3%; H2-...

11. A synthetic gas generated from coal has the following composition CO2- 7.2%; CO- 24.3%; H2- 14.1%; CH4- 3.5%; N2- 50.9%.

a. Calculate the cubic feet of air required for complete combustion per cubic foot of synthesis gas under the same conditions.

b. If 38% of excess air is used for combustion, what volume of combustion gas at 750 F and 738 mm Hg would be produced per cubic foot of synthetic gas under standard conditions?

Expert Solution

Amanda K answered 2 years ago

A combustion gas has the following composition (by volume): 75% N2, 5.5% O2, 11% CO2, 8.4%...

A combustion gas has the following composition (by volume): 75% N2, 5.5% O2, 11% CO2, 8.4% H2O, and 0.1% CO. a. What is the CO concentration in mg/dscm (dry standard cubic meter)? b. What is the average molecular weight of the gas? c. What is the density of the gas at T = 350 °F and P = 755 mmHg? d. If the measured flowrate was 1000 L/s at the temperature and pressure stated in part (c), what would the...

3. The producer gas made from the coke has the following composition : CO : 28%,...

3. The producer gas made from the coke has the following composition : CO : 28%, CO2 : 3.5%, O2 : 0.5% and N2 : 68%. The gas burned with such a quantity of air that the oxygen from air is 20% in excess of the net oxygen required for complete combustion. If the combustion is 98% complete, calculate the weight of the gaseous product formed. Given the oxidation reaction as below: CO + ½ O2  CO2

Consider the water-shift gas reaction: H2O + CO --> H2 + CO2 A closed reaction vessel...

Consider the water-shift gas reaction: H2O + CO --> H2 + CO2 A closed reaction vessel maintained at 3000 degrees Celcius is filled with 0.475 M H2 and 0.490 M CO2. At equilibrium, their respective concentrations are 0.410 and 0.425 M. PART A: The following ratio represents [H2][CO2] / [H2O][CO] CHOOSE ONE OR MORE: the law of mass action, the mass action expression, the equilibrium constant expression, the equilibrium constant. none of these PART B: which way must the system...

A synthesis gas analyzing 6.4% CO2, 0.2% O2, 40.0% CO, and 50.8% H2, (the balance is...

A synthesis gas analyzing 6.4% CO2, 0.2% O2, 40.0% CO, and 50.8% H2, (the balance is N2), is burned with 40% dry excess air. What is the composition of the flue gas?

question one 100 kg of a gas has the following mass composition: 19.3% CO2, 6.5% O2...

question one 100 kg of a gas has the following mass composition: 19.3% CO2, 6.5% O2 , 2.1% H2O and 72.1% N2 What is the mole fraction of each component in the mixture? Molecular weight of (CO2= 44, O2=32, H2O=18, N2=28) question two The density of a certain solution is 1.05 g/cm3 at 25°C. How many cubic meters will be occupied by 5000 kg of this solution.

CO2(g) + C(s) = 2 CO(g) a) Using the Bouduard reaction, calculate gas composition in a...

CO2(g) + C(s) = 2 CO(g) a) Using the Bouduard reaction, calculate gas composition in a furnace under 1 atm total pressure and 1100 K. b) Under the same furnace conditions, is it possible to reduce VO to V by CO? ( VO + CO = V + CO2 ) C(s) + O2(g) = CO2(g) o GT = - 394100 – 0.84 T J/mol C(s) + ½ O2(g) = CO(g) o GT = - 111700 – 87.65 T J/mol V(s)...

A gas stream (40.1 mol% H2, 34.9 mol% CO, 19.8 mol% CO2 and 5.2mol% CH4) enters...

A gas stream (40.1 mol% H2, 34.9 mol% CO, 19.8 mol% CO2 and 5.2mol% CH4) enters a cooler at 1832 degrees fahrenheit and leaves the cooler at 50 degrees fahrenheit at constant absolute pressure of 26,600 Torr. Gas enters the cooler at 123 m^3/min. A)Assume ideal gas behaviior to calculate the molar flow rate (mol/min) and volumetric flow rate (m^3/min) of the mixture exiting the cooler. B) Which component will condense first at 50 degrees fahrenheit if the pressure could...

Chemical engineering question A synthesis gas containing 6.4% CO2, 0.2% O2, 40.0% CO and 50.8% H2...

Chemical engineering question A synthesis gas containing 6.4% CO2, 0.2% O2, 40.0% CO and 50.8% H2 (the remainder is N2) is burned with 40 % excess dry air (assume 21 % O2 and 79 % N2). i)Identify the reactions occurring during combustion of this syngas. ii)Calculate the amount of air added per 100 mol of syngas. iii)If complete combustion occurs, then calculate the composition of the flue gas on a weight basis.

Saturated process gas containing CO( 5 wt%), CO2(15 wt%) and H2( 80 wt%) on dry basis...

Saturated process gas containing CO( 5 wt%), CO2(15 wt%) and H2( 80 wt%) on dry basis enters compressor at 40oC and 8 atm . The process gas is compressed to 30 atm. For 100 NM3 (on dry basis) of process gas (a) Estimate the weight of water condensed if gas is compressed isothermally (b) Estimate outlet temperature with 15 degrees of superheat and amount of water condensed.

Consider the following reaction: CO (g) + H2O (g) ⇌ CO2 (g) + H2(g) If you...

Consider the following reaction: CO (g) + H2O (g) ⇌ CO2 (g) + H2(g) If you start with a mixture containing 1.00 mol of CO and 1.00 mol of H2O, calculate the number of moles of each component in the mixture when equilibrium is reached at 1000 °C. The mixture contains 0.43 mol H2? nCO = nH2O = nCO2 = How do I work this out?

Question