Question

In: Civil Engineering

For bending only, determine the lightest-weight W-shape to carry a uniform dead load of 4.5 kip/ft...

For bending only, determine the lightest-weight W-shape
to carry a uniform dead load of 4.5 kip/ft plus the
beam self-weight and a live load of 3.5 kip/ft on a simple
span of 24 ft. Consider only the limit state of yielding and
use A992 steel. Design by (a) LRFD

Solutions

Expert Solution


Related Solutions

Select the lightest W section to support a uniform distributed load WD=0.5 kip/ft, W=1.4 kip/ft in...
Select the lightest W section to support a uniform distributed load WD=0.5 kip/ft, W=1.4 kip/ft in addition to the section self weight.    The element will be simple supported with a span of 24 ft. Use A36 (Deflection does not require to be verified).
The service load bending moments on a beam are 128 kip-ft for dead load and 107...
The service load bending moments on a beam are 128 kip-ft for dead load and 107 kip-ft for live load. The beam is 12 in. wide, f’c is 3000 psi and fy is 60 ksi. Determine Mu, Mt, p, R, the depth of the beam and the As of tensile reinforcing required. How many no. 8 bars or No. 10 bars would have the required As?
Determine the lightest section W14 available to carry a service dead load of 150 kips and...
Determine the lightest section W14 available to carry a service dead load of 150 kips and a service live load of 250 kips. The effective length of the column about both axes is 15 ft. Use A992 steel. (10 points)
Select the lightest W shape to support a uniformly distributed load of 1600 lb/ft ona simple...
Select the lightest W shape to support a uniformly distributed load of 1600 lb/ft ona simple span of 48 ft. Deflection is not to exceed span/240. Assume a yield stress of 50 ksi. Allowable bending stress of 22,000 psi.
A 40 ft simple span beam is loaded with a uniform dead load of 2.4 kips/ft...
A 40 ft simple span beam is loaded with a uniform dead load of 2.4 kips/ft plus the beam self-weight and a uniform live load of 3.3 kips/ft. The lateral supports are located at the supports and at the midpoint of the span. Determine the leastweight W-shape to carry the load. Use A992 steel and Cb= 1.0. Design by (a) LRFD and (b) ASD. [6.16-36]
Select the lightest W-section for bending, Cb=1 MD = 60 k-ft ML = 40 k-ft Fy=...
Select the lightest W-section for bending, Cb=1 MD = 60 k-ft ML = 40 k-ft Fy= 50 ksi Lb=10ft
Determine the lightest W14 section to carry LRFD factored compression load of 900 kips and LRFD...
Determine the lightest W14 section to carry LRFD factored compression load of 900 kips and LRFD factored strong axis moment of 600 foot-kips.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT