Question

Where to Import a library into a given code

Digital pins can be used to

Analog pins can be used to

AnalogReadSerial:

What pins on the Arduino can be assigned as…

The Arduino uses what to assign analog values?

Examples of a standard Arduino library

The Arduino uses a structured programming language-what type

Channels of A/D conversion on the Arduino Uno

The Arduino correlates temperature readings with what

Answer 1

1. the digital pins can be used for general purpose input and output via the pinMode(), digitalRead(), and digitalWrite() commands

2. the analog input pins perform 10-bit analog-to-digital conversion (ADC) using the analogRead() function. Most of analog pins used as digital pins.but analog pins 6 and 7 cannot be used as digital pins.

3. Analogread serial reads the value on particularanalog input pin and prints the result to the serial monitor.

4.pins on the arduino can be assigned to read data or to send data that is either input or output pins.

5.arduino uses analog to digital converter to assign values and to read the values.

6.standard libraries:

• EEPROM - reading and writing to "permanent" storage
• Ethernet / Ethernet 2 - for connecting to the internet using the Arduino Ethernet Shield, Arduino Ethernet Shield 2 and Arduino Leonardo ETH
• Firmata - for communicating with applications on the computer using a standard serial protocol.
• GSM - for connecting to a GSM/GRPS network with the GSM shield.
• LiquidCrystal - for controlling liquid crystal displays (LCDs)
• SD - for reading and writing SD cards
• Servo - for controlling servo motors
• SPI - for communicating with devices using the Serial Peripheral Interface (SPI) Bus
• SoftwareSerial - for serial communication on any digital pins. Version 1.0 and later of Arduino incorporate Mikal Hart's NewSoftSerial library as SoftwareSerial.
• Stepper - for controlling stepper motors
• TFT - for drawing text , images, and shapes on the Arduino TFT screen
• WiFi - for connecting to the internet using the Arduino WiFi shield
• Wire - Two Wire Interface (TWI/I2C) for sending and receiving data over a net of devices or sensors.

7.arduino uses atructed programming language and the structure of it as

Setup()

Statements;

Loop()

Statements

8.arduino works with six adc channels.they are the analog pins from a0 to a5 on the board.

9.arduino takes temparature reading with analog pins.later they can be converted to digital for further processing