Question

In: Mechanical Engineering

What is the acceleration of the 62 kg block if θ  = 34, μ s = 0.4,...

What is the acceleration of the 62 kg block if θ  = 34, μ s = 0.4, and μ k = .3? Round your answer to three significant figures.

If the block starts from rest at the position L = 25 m, how fast will it be traveling when it reaches the bottom of the incline? Round your answer to three significant figures.

Solutions

Expert Solution

The limiting angle is less than the inclined angle so, the block is already in motion so the dynamic friction is considered.

The velocity is found using two methods bothe are explained clearly in below images.

In 4.052 seconds the block will reach to bottom of the inclined plane with acceleration 3.045 m/s2.


Related Solutions

A 62-kg bicyclist rides his 10.3-kg bicycle with a speed of 13.5 m/s. Assuming contant acceleration,...
A 62-kg bicyclist rides his 10.3-kg bicycle with a speed of 13.5 m/s. Assuming contant acceleration, (a) How much work must be done by the brakes to bring the bike and rider to a stop? kJ (b) How far does the bicycle travel if it takes 4.7 s to come to rest? m (c) What is the magnitude of the braking force? N
A block with mass m1 = 8.5 kg is on an incline with an angle θ...
A block with mass m1 = 8.5 kg is on an incline with an angle θ = 29° with respect to the horizontal. For the first question there is no friction between the incline and the block. 1) When there is no friction, what is the magnitude of the acceleration of the block? ) Now with friction, the acceleration is measured to be only a = 3.61 m/s2. What is the coefficient of kinetic friction between the incline and the...
A block with mass m1 = 8.9 kg is on an incline with an angle θ...
A block with mass m1 = 8.9 kg is on an incline with an angle θ = 27° with respect to the horizontal. For the first question there is no friction, but for the rest of this problem the coefficients of friction are: μk = 0.25 and μs = 0.275. 1)When there is no friction, what is the magnitude of the acceleration of the block? 2)Now with friction, what is the magnitude of the acceleration of the block after it...
A block with mass m1 = 8.9 kg is on an incline with an angle θ...
A block with mass m1 = 8.9 kg is on an incline with an angle θ = 31° with respect to the horizontal. For the first question there is no friction between the incline and the block. 1)When there is no friction, what is the magnitude of the acceleration of the block? 2)Now with friction, the acceleration is measured to be only a = 3.13 m/s2. What is the coefficient of kinetic friction between the incline and the block? 3)To...
A block with mass m1 = 9.4 kg is on an incline with an angle θ...
A block with mass m1 = 9.4 kg is on an incline with an angle θ = 34° with respect to the horizontal. For the first question there is no friction between the incline and the block. 1) When there is no friction, what is the magnitude of the acceleration of the block? m/s2 2) Now with friction, the acceleration is measured to be only a = 3.73 m/s2. What is the coefficient of kinetic friction between the incline and...
A block with mass m1 = 8.7 kg is on an incline with an angle θ...
A block with mass m1 = 8.7 kg is on an incline with an angle θ = 38° with respect to the horizontal. For the first question there is no friction, but for the rest of this problem the coefficients of friction are: μk = 0.34 and μs = 0.374. 1) When there is no friction, what is the magnitude of the acceleration of the block? 2) Now with friction, what is the magnitude of the acceleration of the block...
A block with mass m1 = 8.7 kg is on an incline with an angle θ...
A block with mass m1 = 8.7 kg is on an incline with an angle θ = 38° with respect to the horizontal. For the first question there is no friction, but for the rest of this problem the coefficients of friction are: μk = 0.34 and μs = 0.374. 1) When there is no friction, what is the magnitude of the acceleration of the block? 2) Now with friction, what is the magnitude of the acceleration of the block...
A 2 kg block is dragged up a hill at an acceleration of 1.8. If the...
A 2 kg block is dragged up a hill at an acceleration of 1.8. If the hill is inclined at 30 and the coefficient of friction is 0.1 what force must be applied? I got 15.2 but it was marked wrong no other info
A 7.1 kg block with a speed of 3.3 m/s collides with a 14.2 kg block...
A 7.1 kg block with a speed of 3.3 m/s collides with a 14.2 kg block that has a speed of 2.2 m/s in the same direction. After the collision, the 14.2 kg block is observed to be traveling in the original direction with a speed of 2.8 m/s. (a) What is the velocity of the 7.1 kg block immediately after the collision? (b) By how much does the total kinetic energy of the system of two blocks change because...
A 7.3 kg block with a speed of 4.8 m/s collides with a 14.6 kg block...
A 7.3 kg block with a speed of 4.8 m/s collides with a 14.6 kg block that has a speed of 3.2 m/s in the same direction. After the collision, the 14.6 kg block is observed to be traveling in the original direction with a speed of 4.0 m/s. (a) What is the velocity of the 7.3 kg block immediately after the collision? (b) By how much does the total kinetic energy of the system of two blocks change because...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT