1 - Is PID control used in Feed Forward or Feed Back control? 2 - We...

1 - Is PID control used in Feed Forward or Feed Back control?

2 - We have a controller, and every time the Operator changes the Set Point, the controller responds, and gets the process sorted out. Now, somewhere, we have read that load disturbances needed to be considered in processes, as well. How will this controller react, if there is a load disturbance, and not a Set Point change?

Expert Solution

Manojponduru answered 2 years ago

1: Is PID control used in Feed Forward or Feed Back control? 2: Explain how Open...

1: Is PID control used in Feed Forward or Feed Back control? 2: Explain how Open Loop Tuning differs from Closed Loop Tuning.

1)How does the feed forward control loop anticipate disturbance ? Elaborate with an example. 2)It is...

1)How does the feed forward control loop anticipate disturbance ? Elaborate with an example. 2)It is well known that PLC is used for batch processes; however, SCSADA can be used for continuous processes as well;though, it is built on PLC. How is that possible ? 3) A good example of the application of proportional derivative ( PD ) controller is please solve the questions at least two questions

Explain how you could do a level control loop, by making use of the FEED FORWARD...

Explain how you could do a level control loop, by making use of the FEED FORWARD philosophy

What is the function of a PID controller? List the applications of PID modes of control.

When trying to implement PID control, it is said that we typically find three types of...

When trying to implement PID control, it is said that we typically find three types of processes, namely: a) Resistance Type Processes b) Capacitance Type Processes, c) Inertia Type Processes. In most instances, Inertia processes are quite uncommon. Carefully consider your experience over the years, and describe an application, which according to your understanding of the subject matter, comprises of both Resistance and Capacitance effects.

(TCO 4) Describe PID control.

Respond to this discussion, what feed back could you give? Correlation is a statistical technique used...

Respond to this discussion, what feed back could you give? Correlation is a statistical technique used to determine the relationship between two or more variables (Thomas, Nelson, & Silverman, 2015). This is a way to determine if there are positive or negative relationships between variables in research. For example, if someone were to research the effect of different amounts of creatine monohydrate supplementation in high school athletes, they may notice a correlation between the amounts of supplementation and the athletes...

A triple-effect forward-feed evaporator is used to concentrate a liquid which has marginal elevation in boiling...

A triple-effect forward-feed evaporator is used to concentrate a liquid which has marginal elevation in boiling point. The temperature of the stream to the first effect is 125°C, and the boiling point of the solution within third effect is 45°C. Find out at what temperatures the fluid boils in the Ι and ΙΙ effects. The overall heat transfer coefficients are 2250W/m2 in the Ι-effect, 1800W/m2 in the ΙΙ-effect and 1300W/m2 in the ΙΙΙ-effect respectively.

A triple effect forward-feed evaporator is used to concentrate 6 kg/s of 14% mass fraction of...

A triple effect forward-feed evaporator is used to concentrate 6 kg/s of 14% mass fraction of caustic soda at 75C to 47% mass fraction. Steam input in first effect is 150C. Vapour from the third effect is 39C at 7kPa. Overall heat transfer coefficient in effect 1, U1 is 3000 W/m2 K, effect 2, U2 is 2000 W/m2 K and effect 3, U3 is 1250 W/m2 K. Find boiling point elevation in each effect.

control system Design a system that will run on a PID process

Question