Question

In: Mechanical Engineering

Determine the temperature rise in the specimen for each case in Problem 6.75 (Open-die forging of...

Determine the temperature rise in the specimen for each case in Problem 6.75 (Open-die forging of a cylindrical, annealed copper specimen 10 mm high and 25 mm in diameter, up to a reduction of 50%, for the cases of (a) no friction between the flat dies and the specimen, (b) ? = 0.10, and (c) ? = 0.30. Ignore barreling.), assuming that the process is adiabatic and the temperature is uniform throughout the specimen. Given: K=315 MPa; n=0.54 from table 2.2 p.38. ?=8970 Kg/m3 ; CP=380J/KgK from inner cover page.

Solutions

Expert Solution


Related Solutions

Derive the Friction Hill equation for open die forging of a cylindrical workpiece
Derive the Friction Hill equation for open die forging of a cylindrical workpiece
An open forging die used to forge a cylindrical part with the initial diameter is 45...
An open forging die used to forge a cylindrical part with the initial diameter is 45 mm and the initial height is 40 mm. The coefficient of friction at the die-work interface is 0.20. The height after forging is 25 mm. The yield strength of the work material is 285 MPa, and its flow curve is defined by a strength coefficient of 600 MPa and a strain-hardening exponent of 0.12. Determine the force in the operation (a) just as the...
A cylindrical piece is shaped by a cold open die forging. The initial length is 70...
A cylindrical piece is shaped by a cold open die forging. The initial length is 70 mm, and the diameter is 50 mm. The piece length will be 40 mm at the end of the operation. Draw the part length-forging force graph by calculating the forging forces at the start time and at different length values ​​of the part (h = 60 mm, 50. mm, 45 mm). K 345 MPa, n 0.17, p 0.1
What is barling effect in open die forging in operation How can it minimized Short clear...
What is barling effect in open die forging in operation How can it minimized Short clear answer be neat
Determine the force vs reduction in height curve in open-dye forging of a cylindrical, annealed copper...
Determine the force vs reduction in height curve in open-dye forging of a cylindrical, annealed copper specifmen 10mm high and 25mm in diameter, up to a reduction of 50% for the following cases: a) no friction between the flat dies and the specimen b) u=0.10 c) u=0.30 Ignore barreling and use average pressure formulas. Then, calculate the work done and the temperature rise in the specimen for each case, assuming the process is adiabatic and and the temperature is uniform...
Examine several small metal tools or parts. Try to determine whether each was formed by forging,...
Examine several small metal tools or parts. Try to determine whether each was formed by forging, rolling, extrusion, drawing, or casting. Consider the overall shape of the object, any surface features that exist, and even words that are marked on the part.
With reference to relevant legislation and case law, determine if the following scenarios give rise to...
With reference to relevant legislation and case law, determine if the following scenarios give rise to income for tax purposes: John is a pensioner and swapping his surplus free range eggs valued at $150 (for the year) with his neighbour Alex for surplus vegetables grown in his home garden. ANSWER: ** Answer box will enlarge as you type David is a builder and helping John at weekends to build his home, doing so on the basis that David can have...
With reference to relevant legislation and case law, determine if the following scenarios give rise to...
With reference to relevant legislation and case law, determine if the following scenarios give rise to income for tax purposes: (a) John is a pensioner and swapping his surplus free range eggs valued at $150 (for the year) with his neighbour Alex for surplus vegetables grown in his home garden. (b) David is a builder and helping John at weekends to build his home, doing so on the basis that David can have John’s caravan towed trailer (which cost him...
Determine the missing amounts in each of the following independent cases. Case A Case B Case...
Determine the missing amounts in each of the following independent cases. Case A Case B Case C Beginning inventory, raw material 98,000 7,500 Ending inventory, raw material 199,000 34,000 Purchases of raw material 295,000 274,000 Direct material used 235,000 323,000 Direct labor 395,000 72,000 Manufacturing overhead 595,000 99,000 Total manufacturing costs 1,135,000 1,130,000 222,000 Beginning inventory, work in process 89,000 79,000 Ending inventory, work in process 124,000 4,400 Cost of goods manufactured 1,088,000 225,000 Beginning inventory, finished goods 195,000 139,000...
1. For what reasons might the price of foreign holidays rise? In each case identify whether...
1. For what reasons might the price of foreign holidays rise? In each case identify whether these are reasons affecting demand or supply (or both). - A rise in the price of air travel (supply). - A fall in the exchange rate, giving less foreign currency for the pound (supply – tour operators’ costs abroad rise when measured in pounds). - The economy booms (demand – more people can afford to go on holiday; supply – inflation raises tour operators’...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT