Question

In: Mechanical Engineering

In a tensile test of an aluminum rod it has a calibrated length of 50.8 mm...

 In a tensile test of an aluminum rod it has a calibrated length of 50.8 mm and a diameter of
12.74 mm. A load of 3 180 kg and an elongation at the elastic limit of 0.0175 cm was recorded. The distance in the areacalibrated after the break is 5.65 cm and the final diameter in the section of the fracture was 1.05 cm. In a tensile test of an aluminum rod it has a calibrated length of 50.8 mm and a diameter of 12.74 mm. A load of 3 180 kg and an elongation at the elastic limit of 0.0175 cm was recorded. The distance in the area calibrated after the break is 5.65 cm and the final diameter in the section of the fracture was 1.05 cm. determine :

a) the effort in the elastic limit; b) The elastic modulus of the material; c) The ductility of the material ie the deformation unit and the reduction of total area until the test tube ruptures; d) The final length of a bar of this material 250 cm when applying an effort of 200 MPa.

Solutions

Expert Solution


Related Solutions

An aluminum rod with a square cross section is 1.2 m long and 5.0 mm on...
An aluminum rod with a square cross section is 1.2 m long and 5.0 mm on edge. (a) What is the resistance between its ends? (b) What must be the diameter of a cylindrical copper rod of length 1.2 m if its resistance is to be the same as that of the aluminum rod? The resistivity of aluminum is 2.75 × 10-8 Ω·m and the resistivity of copper is 1.69 × 10-8 Ω·m.
A long, uniform rod of length  0.500 mm and is rotating in a circle on a frictionless...
A long, uniform rod of length  0.500 mm and is rotating in a circle on a frictionless table. The axis of rotation is perpendicular to the length of the rod at one end and is stationary. The rod has an angular velocity of 0.42 rad/srad/s and a moment of inertia about the axis of 3.20×10−3 kg⋅m2kg⋅m2 . An insect initially standing on the rod at the axis of rotation decides to walk to the other end of the rod. When the...
A straight rod of solid polymer is of length 1 m and diameter 10 mm. The...
A straight rod of solid polymer is of length 1 m and diameter 10 mm. The polymer is linearly viscoelastic with a tensile creep compliance given by: D = 2- exp(-0.1t); Gpa^-1 Where t is in hours. The rod is suspended vertically and a mass of 10 kg is hung from it for 10 hours. a) Find the change of length of the rod. b) Identify the time domain of this property test procedure.
Suppose that the length of an aeronautical component’s tensile strength test can be modeled as an...
Suppose that the length of an aeronautical component’s tensile strength test can be modeled as an exponential random variable with a mean of 4 years. (i) What is the probability that the tensile strength exceeds the mean value by no more than 2 standard deviations? (ii) Compute the median and the 64th percentile of the tensile strength.
tensile strength test how to find the maximum load of aluminum and mild steel? how to...
tensile strength test how to find the maximum load of aluminum and mild steel? how to find yield strength?
A rod of length L has a charge per unit length λ. The rod rotates around...
A rod of length L has a charge per unit length λ. The rod rotates around its center at angular frequency ω. Using the dipole approximation, find the power radiated by the rotating rod.
A pendulum consists of a light rigid rod of length 250 mm, with two identical uniform...
A pendulum consists of a light rigid rod of length 250 mm, with two identical uniform solid spheres of radius 50 mm attached one on either side of its lower end. Find the period of small oscillations (a) perpendicular to the line of centers and (b) along it.
a) A cylindrical length of wire has a radius of 4 mm and a length of...
a) A cylindrical length of wire has a radius of 4 mm and a length of 10 cm. If the length is growing at a rate of 2 cm/sec and the radius is shrinking at a rate of 1 mm/sec, what is the rate of change of the volume in cm3/sec at that point in time. (Be careful of units) b) Consider the same length of wire as before (radius of 4 mm and length of 10 cm). This time...
A slender rod with length L has a mass per unit length that varies with distance...
A slender rod with length L has a mass per unit length that varies with distance from the left end, where ? = 0, according to ??/?? = ??, where ? has units of kg/m^2 a. Calculate the total mass M of the rod in terms of ? and L. b. Use the equation ? = ∫ ?=?? to calculate the moment of inertia of the rod for an axis at the left end, perpendicular to the rod. Express your...
A 50 cm long rod is half aluminum and half copper. The aluminum end is in...
A 50 cm long rod is half aluminum and half copper. The aluminum end is in boiling water. The end of an aluminum rod (50 cm long) is maintained at 100 C by immersing in a pot of boiling water and the other end at 00C by an ice-water mixture. If the cross-sectional area of the rod is 1.3 cm2, how much will the rod melt in 20 min? What will be the steady temperature at the Al-Cu junction?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT