Question
In: Mechanical Engineering
Consider 0.8 kg of N2 at 300 K, 1 bar contained in a rigid tank connected...
Consider 0.8 kg of N2 at 300 K, 1 bar contained in a
rigid tank connected by a valve to another rigid tank holding 0.3
kg of CO2 at 300 K, 1 bar. The valve is opened and gases
are allowed to mix, achieving an equilibrium state at 290 K.
Determine:
(a) the volume of each tank, in m3.
(b) the final pressure, in bar.
(c) the magnitude of the heat transfer to or from the gases during
the process, in kJ.
(d) the entropy change of each gas and of the overall system, in
kJ/K.
Solutions
samet mamat answered 2 years agoRelated Solutions
Nitrogen gas is contained in a rigid 1-m3 tank, initially at 5 bar, 300 K. Heat...
Nitrogen gas is contained in a rigid 1-m3 tank, initially at 5
bar, 300 K. Heat transfer to the contents of the tank occurs until
the temperature has increased to 400 K. During the process, a
pressure-relief valve allows nitrogen to escape, maintaining
constant pressure in the tank. Neglecting kinetic and potential
energy effects, and using the ideal gas model with constant
specific heats evaluated at 350 K, determine (a) the mass of
nitrogen that escapes, in kg, and (b)...
Steam at 275ºC and 15.0 bar is contained in a rigid tank with the volume of...
Steam at 275ºC and 15.0 bar is contained in a rigid tank with
the volume of 10.0 m3 . In a constantvolume cooling process, the
pressure inside the tank drops to 1.8 bar and some of the steam
condenses. Calculate 1) the temperature of the tank contents after
the process, 2) the amount of steam condensed during the process
(in kg), and 3) the amount of heat removed from the tank during the
process.
Steam at 275ºC and 15.0 bar is contained in a rigid tank with the volume of...
Steam at 275ºC and 15.0 bar is contained in a rigid tank with
the volume of 10.0 m^3 . In a constant volume cooling process, the
pressure inside the tank drops to 1.8 bar and some of the steam
condenses. Calculate 1) the temperature of the tank contents after
the process, 2) the amount of steam condensed during the process
(in kg), and 3) the amount of heat removed from the tank during the
process.
Nitrogen (N2), at 300 K, 1 bar with a mass flow rate of 1 kg/s enters...
Nitrogen (N2), at 300 K, 1 bar with a mass flow rate of 1 kg/s
enters an insulated mixing chamber and mixes with carbon dioxide
(CO2) entering as a separate stream at 500 K, 1 bar with a mass
flow rate of 0.5 kg/s. The mixture exits at 1 bar. Assuming ideal
gas behavior, for steady-state operation, determine (a) the molar
analysis (i.e., the molar flow rate for each gas) of the exiting
mixture, (b) the exit mixture temperature, and...
Thermodynamics A 1 m3 rigid tank has propane at 100 kPa and 300 K. The tank...
Thermodynamics
A 1 m3 rigid tank has propane at 100 kPa and 300 K.
The tank is connected to another 0.5 m3 rigid tank which
has propane at 250 kPa and 400 K by a ball valve. The valve is
opened and both tanks come to a uniform state at 325 K.
1- State all assumptions you
need to solve the problem.
2- Calculate the final
pressure of propane in both tanks?
3- Calculate the mass of
propane before and after opening the...
10 kg of steam is contained at 10 bar in a rigid vessel of volume 2.275...
10 kg of steam is contained at 10 bar in a rigid vessel of
volume 2.275 m3. The vessel is cooled until the pressure
in the vessel is 7 bar. Calculate the amount of heat removed from
the steam.
Nitrogen (N2) at 1 bar, 300 K enters a compressor operating at steady state and is...
Nitrogen (N2) at 1 bar, 300 K enters a compressor
operating at steady state and is compressed adiabatically to an
exit state of 16 bar, 750 K. The N2 is modeled as an
ideal gas and kinetic and potential energy effects are negligible.
Determine the work input, in kJ per kg of N2 flowing,
the rate of entropy production, in kJ/K per kg of N2
flowing, and the isentropic compressor efficiency.
0.1 kg of air (ideal gas) is contained in a closed, rigid tank of volume 0.04...
0.1 kg of air (ideal gas) is contained in a closed, rigid tank
of volume 0.04 m^3 at 500 K. A paddle wheel stirs the air and
transfers energy to the air at a constant rate of 1 kW for 100s.
The temperature of the air increases to 600 K.
(a) What is the final pressure of the air (kPa)
(b)Calculate the heat transfer (kJ) for the process (use a
constant, average specific heat)
0.1 kg of air (ideal gas) is contained in a closed, rigid tank of volume 0.04...
0.1 kg of air (ideal gas) is contained in a closed, rigid tank
of volume 0.04 m^3 at 500 K. A paddle wheel stirs the air and
transfers energy to the air at a constant rate of 1 kW for 100s.
The temperature of the air increases to 600 K.
(a) What is the final pressure of the air (kPa)
(b)Calculate the heat transfer (kJ) for the process (use a
constant, average specific heat)
Assignment 3 Question: A 1 m3 rigid tank has propane at 100 kPa and 300 K....
Assignment 3 Question: A 1 m3 rigid tank has propane at 100 kPa
and 300 K. The tank is connected to another 0.5 m3 rigid tank which
has propane at 250 kPa and 400 K by a ball valve. The valve is
opened and both tanks come to a uniform state at 325 K. 1- State
all assumptions you need to solve the problem. 2- Calculate the
final pressure of propane in both tanks? 3- Calculate the mass of
propane...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- report about the impact of Novel Corona Virus (COVID-19) on the operations strategies in the Airlines...
- Create a class named Purchase. Each Purchase contains an invoice number, amount of sale, and amount...
- Displaying Content of an XML File Using PHP Script or Code In this week, you are...
- You are the HR Manager of a privately owned company. Your head office is in Ontario,...
- **Complete for display digits 0 and 7 only** A combinational circuit is used to control a...
- How are universities and K-12 institutions supporting their students, staff, and faculty amidst the pandemic? How...
- Depression is the most common disorder in the world, what are the symptoms? What should you...
ADVERTISEMENT