Question

In: Physics

A single-coil loop of radius r = 7.40 mm, shown below, is formed in the middle...

A single-coil loop of radius r = 7.40 mm, shown below, is formed in the middle of an infinitely long, thin, insulated straight wire carrying the current i = 32.5 mA.  

What is the magnitude of the magnetic field at the center of the loop?

Solutions

Expert Solution

Kindly Upvote My Answer

It's my request

Thanks


Related Solutions

If 47.0 cm of copper wire (diameter = 1.00 mm) is formed into a circular loop...
If 47.0 cm of copper wire (diameter = 1.00 mm) is formed into a circular loop and placed perpendicular to a uniform magnetic field that is increasing at a constant rate of 10.5mT/s, at what rate is thermal energy generated in the loop? _______________ W
A circular wire loop of radius r = 0.25 m and resistance R = 11.1 Ω...
A circular wire loop of radius r = 0.25 m and resistance R = 11.1 Ω rotates about a shaft through its diameter at a constant rate of f = 5.8 Hz in a uniform B = 0.49-T magnetic field directed perpendicular to the rotation axis. The plane of the loop is perpendicular to the magnetic field at time t = 0. a) Find the expression for the time-dependent magnetic flux through the loop. Φ = b) Find the value...
A heating coil is made up by winding the nichrome wire of radius r = 1.00...
A heating coil is made up by winding the nichrome wire of radius r = 1.00 mm and length L = 120 m. If the voltage of 120 V is applied across the coil, what power is dissipated in it? (The resistivity of nichrome is 1.50x10-6 Ω · m). If the voltage is kept the same, which of the following statements is (are) correct: If the wire were longer, the power would be greater; If the wire were longer, the...
What is the current in a wire of radius R = 3.58 mm if the magnitude...
What is the current in a wire of radius R = 3.58 mm if the magnitude of the current density is given by (a) Ja = J0r/R and (b) Jb = J0(1 - r/R) in which r is the radial distance and J0 = 5.08 × 10^4 A/m^2? (c) Which function maximizes the current density near the wire’s surface?
A length of 20-gauge copper wire (of diameter 0.8118 mm) is formed into a circular loop...
A length of 20-gauge copper wire (of diameter 0.8118 mm) is formed into a circular loop with a radius of 24.0 cm. A magnetic field perpendicular to the plane of the loop increases from zero to 18.0 mT in 0.20 s. Find the average electrical power dissipated in the process.
A solenoid (coil) of radius R has 10 turns per centimeter. It is 10cm long, and...
A solenoid (coil) of radius R has 10 turns per centimeter. It is 10cm long, and the coiled wire carries a current I. In addition to the coil of wire, a second wire runs right down the central axis of the solenoid, carrying a current of 2I. (The solenoid wire doesn't intersect this second wire, because the former wraps around the latter, always a distance R away.) A) Find the magnitude of the total magnetic field at a distance R/2...
A conducting sphere with a radius of R = 14.9 mm has a uniform and constant...
A conducting sphere with a radius of R = 14.9 mm has a uniform and constant surface charge density of a = 4.7 nC / m ?. What will be the magnitude of the electric field produced by that sphere at a distance from the center of the sphere of r = 34.3 cm?
A wire with a radius R = .89 mm and length 45 cm is made of...
A wire with a radius R = .89 mm and length 45 cm is made of two materials, Carbon and Nichrome (resistivity not given I assume it needs to be googled). The Carbon portion is 15 cm long. The temperature of the wire is 75 oC. The wire is connected to a 12 volt battery. a) Find the total Resistance of the battery as well as the current (I) and the current density (J) and the electric field (E) in...
3. ​ ​Induced Emf ​A circular coil of radius 0.11 m contains a single turn and...
3. ​ ​Induced Emf ​A circular coil of radius 0.11 m contains a single turn and is located in a constant magnetic field of magnitude 0.27 T. The magnetic field has the same direction as the normal to the plane of the coil. The radius increases to 0.30 m in a time of 0.080 s. (a) Determine the magnitude of the emf induced in the coil. (b) The coil has a resistance of 0.70 ?. Find the magnitude of the...
A solid 0.5350-kg ball rolls without slipping down a track toward a loop-the-loop of radius R...
A solid 0.5350-kg ball rolls without slipping down a track toward a loop-the-loop of radius R = 0.8150 m. What minimum translational speed vmin must the ball have when it is a height H = 1.276 m above the bottom of the loop, in order to complete the loop without falling off the track?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT