convert a flow of CO2 of 100 kg/h to lb-moles/h

Expert Solution

100Kg/h of Co2

100000g/h of CO2

no of moles = W/G.M.Wt

= 100000g/h/44g/mole

= 2272.73 mole/h [ 1 mole = 0.0022 lb mole]

= 5.01 lb mole/h >>>>answer

queen_honey_blossom answered 2 years ago

43 lb. moles of CO2, 6 lb. moles of water vapor and 195 lb. moles of...

43 lb. moles of CO2, 6 lb. moles of water vapor and 195 lb. moles of N2 and 10 lb. moles of oxygen flow from a stack at 121 C. What is the partial pressure of water vapor in the flue gas in mm Hg.

Q: A mixture of 0.423 moles of N2 and 5.73 moles of CO2 has a total...

Q: A mixture of 0.423 moles of N2 and 5.73 moles of CO2 has a total pressure of 777 torr. What is the partial pressure of N2? Please give the details of the ploblem, thanks.

Calculate the energy required to convert 100 kg of ice at 0 degrees C and 1...

Calculate the energy required to convert 100 kg of ice at 0 degrees C and 1 atm. to water vapor at 650 degrees C and 60 bar. The heat of fusion of ice is 333.6 J/g at 0 degrees C. Suggested path: i) convert the ice from solid to liquid, ii) heat the liquid to the boiling point, iii) convert the saturated liquid to a saturated vapor, iv) heat the vapor to the final temperature, v) pressurize the gas to...

2.00 moles of CO2 and 1.50 moles of H2 are placed into a rigid 5.00-L container...

2.00 moles of CO2 and 1.50 moles of H2 are placed into a rigid 5.00-L container and they react according to the equation ? ? CO2(g) + H2(g) ? CO(g) + H2O(g) ? ? K = 2.50 What will be the concentration of carbon monoxide when equilibrium is reached?

Acetic acid is to be extracted from benzene into water at 25C. 100 kg/h of a...

Acetic acid is to be extracted from benzene into water at 25C. 100 kg/h of a feed that is 0.0092 wt. fraction acetic acid and 0.9908 wt. fraction benzene is fed to a column. The inlet water is pure and flows at 25 kg/h. The desired outlet weight fraction is 0.00040 acetic acid in benzene. Assume total flow rates are constant, water and benzene are completely immiscible, eqilibrium is linear. K=y/x = wt. fraction solute in extract/wt. fraction solute in...

Combustion analysis of 1.500 g of a sample produced 0.0468 moles of CO2(g) and 0.0936 moles...

Combustion analysis of 1.500 g of a sample produced 0.0468 moles of CO2(g) and 0.0936 moles of H2O(g). Which substance is consistent with this analysis?

A 100-lb driver and a 2000-lb tractor lift 900 lb of gravel. Create a MATLAB program...

A 100-lb driver and a 2000-lb tractor lift 900 lb of gravel. Create a MATLAB program that will: Determine the reaction at each of the two rear wheels and two front wheels. The shift has changed and a new driver dumped some of the gravel. Ask the user the weight of the new driver and the weight of the gravel left in the tractor. Calculate the new reaction at each of the two rear wheels and two front wheels. Provide...

3.) Product with Cp = 0.75 Btu/lb°F is flowing at a rate of 3300 lb/h and...

3.) Product with Cp = 0.75 Btu/lb°F is flowing at a rate of 3300 lb/h and has to be cooled from 221°F to 160°F. ? Cooling water at 60°F at a mass flow rate of 10,000 lb/h is used. ? The overall U of the heat exchanger is 115 Btu/h ft2 °F. Calculate the outlet water temperature (will be the same for both) ____________________ and the heat exchanger area for: A co-current flow shell-and-tube heat exchanger. ____________________ A counter-current flow...

One hundred moles of moist air (100 moles) at 25oC and 100 kPa has a dew...

One hundred moles of moist air (100 moles) at 25oC and 100 kPa has a dew point of 16oC. If you want to remove 50% of the initial moisture in the air (at a constant pressure of 100 kPa). 1. Sketch the process. 2. Determine to what temperature should you cool the air? Assume that after removal of 50% of moisture from the air, the final air is saturated.

Water at a flow rate of 20,000 kg/h will be heated from 20°C to 35°C by...

Water at a flow rate of 20,000 kg/h will be heated from 20°C to 35°C by hot water at 140°C. A 15°C hot water temperature drop is allowed. A number of 3.5 m hairpins of 3 in. (ID = 0.0779 m) by 2 in. (ID = 0.0525 m, OD = 0.0603 m) counter flow double-pipe heat exchangers with annuli and pipes, each connected in series, will be used. Hot water flows through the inner tube. Fouling factors are: Rf i...

Question