Question

In: Mechanical Engineering

A 1000kg uniform wheel shaped piece of steel is at rest. A 1kW engine turns the...

A 1000kg uniform wheel shaped piece of steel is at rest. A 1kW engine turns the wheel with its full power.radius of disk is .3m

What rpm will it reach in 1 hour, 6 hours, 12 hours.

Assume no friction from air or bearings. Assume the most efficient continutously variable transmissions if needed.

After 12 hours of charging, how much energy will the wheel produce in kW

Solutions

Expert Solution


Related Solutions

The wheel of an engine starts to rotate from rest with uniform angular acceleration. It accelerates...
The wheel of an engine starts to rotate from rest with uniform angular acceleration. It accelerates angularly for an unknown time (t1) until reaching an angular velocity of 45.13 rad / s, then maintains that angular velocity constant for 37.8 s. The total angle traveled by the wheel in total is 2398.61 rad. a) What is the angular acceleration with which the wheel began to rotate? b) What is the time (t1) that the wheel was accelerating? c) What is...
A wheel turns through 2.1 revolutions while accelerating from rest at 16 rpm/s. What is its...
A wheel turns through 2.1 revolutions while accelerating from rest at 16 rpm/s. What is its final angular speed? How long does it take?
A grinding wheel is a uniform cylinder with a radius of 8.50 cm and a mass...
A grinding wheel is a uniform cylinder with a radius of 8.50 cm and a mass of 0.350 kg . A. Calculate its moment of inertia about its center. B. Calculate the applied torque needed to accelerate it from rest to 1950 rpm in 4.00 s if it is known to slow down from 1750 rpm to rest in 57.5 s .
A piece of insulated wire is shaped into a figure eight as shown in the figure...
A piece of insulated wire is shaped into a figure eight as shown in the figure below. For simplicity, model the two halves of the figure eight as circles. The radius of the upper circle is 4.00 cm and that of the lower circle is 8.00 cm. The wire has a uniform resistance per unit length of 7.00 Ω/m. A uniform magnetic field is applied perpendicular to the plane of the two circles, in the direction shown. The magnetic field...
A grinding wheel is in the form of a uniform solid disk of radius 6.96 cm...
A grinding wheel is in the form of a uniform solid disk of radius 6.96 cm and mass 2.05 kg. It starts from rest and accelerates uniformly under the action of the constant torque of 0.606 N · m that the motor exerts on the wheel. (a) How long does the wheel take to reach its final operating speed of 1 190 rev/min?   s (b) Through how many revolutions does it turn while accelerating? rev
A rectangular coil with N turns and area A is place in a uniform magnetic field...
A rectangular coil with N turns and area A is place in a uniform magnetic field directed into y-direction. (a) What amount of emf is induced in the coil if the coil doesn’t move or rotate? . Let’s say the coil rotates about the z-axis through its center at a constant angular velocity LaTeX: \omegaω. (b) What would be total magnetic flux through the coil as a function of LaTeX: \thetaθ ? (LaTeX: \thetaθ is the angle between the directions...
A vertical wheel with a diameter of 39 cm starts from rest and rotates with a...
A vertical wheel with a diameter of 39 cm starts from rest and rotates with a constant angular acceleration of 7.2 rad/s2 around a fixed axis through its center counterclockwise. a) Through what angle (in degrees) has the point initially at the bottom of the wheel traveled when t = 14 s? (Indicate the direction with the sign of your answer.) b) What is the point's total linear acceleration at this instant? (Enter the magnitude in m/s2.
A wheel free to rotate about its axis that is not frictionless is initially at rest....
A wheel free to rotate about its axis that is not frictionless is initially at rest. A constant external torque of +53 N·m is applied to the wheel for 21 s, giving the wheel an angular velocity of +624 rev/min. The external torque is then removed, and the wheel comes to rest 120 s later. (Include the sign in your answers.) (a) Find the moment of inertia of the wheel. (b) Find the frictional torque, which is assumed to be...
A Ferris wheel with a diameter of 35.0 m in , starts from rest and achieves...
A Ferris wheel with a diameter of 35.0 m in , starts from rest and achieves its maximum operational tangential speed of 2.20 m/s in a time of 15.0 s. a.) what is the magnitude of the wheel
Is the following situation possible? A space station shaped like a giant wheel has a radius...
Is the following situation possible? A space station shaped like a giant wheel has a radius of r = 100 m and a moment of inertia of 5e8 kg m2. A crew of 150 people of average mass 60 kg is living on the rim, and the station's rotation causes the crew to experience an apparent free-fall acceleration of g. A research technician is assigned to perform an experiment in which a ball is dropped at the rim of the...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT