Question
In: Civil Engineering
Design a strap footing to support the two columns. These structural elements are spaced at a...
Design a strap footing to support the two columns. These structural elements are spaced at a distance of 5.4 m center to center. Exterior column is 300 mm x 300 mm and carries a dead load of 250 KN and a live load of 300 KN. Interior column is also 350 mm x 350 mm in cross section and carries a dead load of 360 KN and a live load of 580 KN.
Use f'c = 21 MPa, fy = 276 MPa, and q-all net = 160 KPa. Assume weight of footing to be 9% of total load.
Solutions
Thankyou!!
Ally Wells answered 2 years agoRelated Solutions
Design a strap footing to support the two columns. These structural elements are spaced at a...
Design a strap footing to support the two columns. These
structural elements are spaced at a distance of 4.5 m center to
center. Exterior column is 400 mm x 400 mm and carries a dead load
of 275 KN and a live load of 400 KN. Interior column is also 400 mm
x 400 mm in cross section and carries a dead load of 600 KN and a
live load of 500 KN.
Use f'c = 21 MPa, fy =...
Design a wall footing to support a 30cm − wide reinforced concrete wall with a dead...
Design a wall footing to support a 30cm − wide reinforced
concrete wall with a dead load DL =293 KN/m and a live load
LL = 218 KN/m. The bottom of the footing is to be 1. 2m below
the
final grade, the soil weighs 16 KN m3 ⁄ , the allowable soil
pressure, qa = 192 KN m2 ⁄ , and there is no appreciable
sulfur
content in the soil. fy = 420MPa and fc′ = 21MPa, normal-
weight...
Design an isolated rectangular footing to support an interior column 40 cm × 40 cm in...
Design an isolated rectangular footing to support an interior
column 40 cm × 40 cm in cross section and carries a dead load of
800 kN and a live load of 600 kN. Use f́c= 21 MPa, fy= 420 MPa, q
all (net) =200 kN / m2 , γsoil = 17 kN /m3 , and Df =1.25 m. Space
limitations are such that one lateral dimension cannot exceed 2.5
m
Rectangular Combined Footing design
Rectangular Combined Footing design
Design a square concrete column footing to support a 500-mm x 500-mm reinforced concrete column. The...
Design a square concrete column footing to support a 500-mm x
500-mm reinforced concrete column. The center of the column and
footing must coincide.
Loads: ???=350 ??, ???=480 ??, ???=100 ??−?, ???=130 ??−?
Column Design Criteria: ??′=28 ???, ??=400???
Footing Design Criteria: ??′=28 ???, ??=400???, ??=175 ???,??=1.50
?, ??=16 ??/?3,??=24 ??/?3, ??=20 ??, assume a thickness of the
footing of 500 mm.
Design a square concrete column footing to support a 400-mm x 400-mm reinforced concrete column. The...
Design a square concrete column footing to support a 400-mm x
400-mm reinforced concrete column. The center of the column and
footing must coincide. Loads: ???=350 ??, ???=480 ??, ???=100 ??−?,
???=130 ??−? Column Design Criteria: ??′=28 ???, ??=400??? Footing
Design Criteria: ??′=28 ???, ??=400???, ??=180 ???,??=1.70 ?, ??=16
??/?3,??=24 ??/?3, ??=25 ??, assume a thickness of the footing of
700 mm.
What technology, equipment, and design elements would be use to support the sustainability of a birthing...
What technology, equipment, and design elements would be use to
support the sustainability of a birthing center in the
future.
What will be the length (L in meter) of a rectangular footing to support rectangular column...
What will be the length (L in meter) of a
rectangular footing to support rectangular column 20x70 cm and
carries a dead load of 625 kN and live load of 426 kN. The net
allowable bearing pressure is 155 kPa. The design should be
according to (ACI) code with the following parameters: fc’ = 28
MPa, fy = 420 MPa.
What will be the width (B in meter) of a square footing to support rectangular column...
What will be the width (B in meter) of a square
footing to support rectangular column 40x40 cm and carries a dead
load of 614 kN and live load of 477 kN. The net allowable bearing
pressure is 180 kPa. The design should be according to (ACI) code
with the following parameters: fc’ = 28 MPa, fy = 420
MPa.
What is the importance of structural elements in engineering operations?
What is the importance of structural elements in
engineering operations?
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- C & S Department Store is the second largest clothing and retail store chain in Jamaica....
- Will the Internet and related communication technologies be tools for increasing political freedom, or will they...
- Design a rectangular tied column for a DL = 1000 KN and a LL = 1350...
- Using the Stack class (it's on the class web page) construct a program that will evaluate...
- An old two-flat can be purchased for $200,000 cash. The two units can bring in a...
- Please code in C# - (C - Sharp) Assignment Description Write out a program that will...
- Geraldine Wolfe is a supervisor at Fantastigifts. She has an annual salary of $45,500, paid biweekly,...
ADVERTISEMENT