Question

In: Chemistry

Explain why silicon is normally used for solar cells but not for LEDs?

Explain why silicon is normally used for solar cells but not for LEDs?

Solutions

Expert Solution


Related Solutions

Silicon solar cells vs. thin-film solar cells Compare silicon solar cells with thin-film solar cells in...
Silicon solar cells vs. thin-film solar cells Compare silicon solar cells with thin-film solar cells in the following aspects: (1) device structure; (2) working principle; (3) efficiency; and (4) cost. Need informative answer for my clear understandings.
Solar cells are given antireflection coatings to maximize their efficiency. Consider a silicon solar cell (n=3.50)...
Solar cells are given antireflection coatings to maximize their efficiency. Consider a silicon solar cell (n=3.50) coated with a layer of silicon dioxide (n=1.45). What is the minimum coating thickness that will minimize the reflection at the wavelength of 700 nm where solar cells are most efficient? answer is 121 nm.
how are the photovoltaic cells used for the solar panels similar to voltaic cells? How are...
how are the photovoltaic cells used for the solar panels similar to voltaic cells? How are they different?
how are the photovoltaic cells used for the solar panels similar to voltaic cells? How are...
how are the photovoltaic cells used for the solar panels similar to voltaic cells? How are they different
Explain why several semiconductor materials might be put together to obtain more efficient solar cells.
Explain why several semiconductor materials might be put together to obtain more efficient solar cells.
Explain why several semiconductor materials might be put together to obtain more efficient solar cells.
Explain why several semiconductor materials might be put together to obtain more efficient solar cells.
Describe the working principle of a Silicon Solar Cell. a) How the solar cell generates electricity?...
Describe the working principle of a Silicon Solar Cell. a) How the solar cell generates electricity? Describe n/p doping, depletion region concepts. b) Describe the meaning of Fill Factor. How do you calculate the fill factor? What can be the reasons of bad fill factor behavior? c) A solar panel has an area of 0.5 m2 and illuminated with an irradiation of 1000W/m2 . Its open circuit voltage is 24 V and Short Circuit Current is 5.5 A. If the...
could tin (6.20 x 10^-19j) be used to construct solar cells
could tin (6.20 x 10^-19j) be used to construct solar cells
Make a table that summarizes results over the last four years (2013-2017 only) in understanding degradation in amorphous silicon solar cells.
Make a table that summarizes results over the last four years (2013-2017 only) in understanding degradation in amorphous silicon solar cells. The table should have two columns: (1) Brief description of the main results in the paper, and (2) Reference for the paper
Solar electricity cost. Despite all the advantages of using solar cells to harvest solar energy, solar...
Solar electricity cost. Despite all the advantages of using solar cells to harvest solar energy, solar electricity still has an insignificant share (~1%) in the world’s overall energy supply picture. This is mostly due to the economic consideration. While there’s virtually no fuel (sunlight) cost and maintenance cost once the solar panels are installed, the initial cost of solar electricity systems is still the obstacle for wide-spread adoption of solar photovoltaic technologies. a. Use the single-crystalline Si solar panels as...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT