Question
In: Mechanical Engineering
A turbo fan blades of an airplane is made from hard material which is titanium. a)...
A turbo fan blades of an airplane is made from hard material which is titanium.
a) Suggest the most suitable non-traditional machining process that can be used to produce the turbo fan blades
b) Referring to your answer in (a), briefly describe the machining principle. A sketch may help to facilitate your explanation.
c) List three advantages and two disadvantages of the process.
Solutions
C)
samet mamat answered 1 year agoRelated Solutions
Describe five different industries use products manufactured from Titanium material. Explain the benefits of Titanium clearly.
Describe five different industries use products manufactured
from Titanium material. Explain the benefits of Titanium
clearly.
1. Skywalker Corporation produces hand-made custom lightsabers for the most die-hard Star Wars fans. Each fan...
1. Skywalker Corporation
produces hand-made custom lightsabers for the most die-hard Star
Wars fans. Each fan has their own individual lightsaber that they
special order to fit their needs. Skywalker Corp. applies factory
overhead based off direct labor hours for the year. Below is
information pertaining to estimated and actual direct material,
direct labor, and overhead costs as well as direct labor hours.
Estimated
Actual
Direct
Materials
$24,350
$26,900
Direct
Labor
30,500
32,005
...
Studs used in a turbo pump were made from 0.35C-1.5Ni-1.0Cr-0.2Mo steel, quenched and tempered to 400...
Studs used in a turbo pump were made from
0.35C-1.5Ni-1.0Cr-0.2Mo steel, quenched and tempered to 400 HV
hardness, cadmium-plated and baked at 200°C for 2 h. The studs used
in a turbo pump failed after 3 months of assembly. A fractograph of
a failed stud revealed a predominantly intergranular mode mixed
with ductile failure features. Increasing the baking time to 12 h
considering the low diffusivity of hydrogen across the relatively
impervious cadmium coating solved the problem. Explain the cause...
Assume you are making a compisite material airplane, which has ligter weight and more fuel effciency....
Assume you are making a compisite material airplane, which has
ligter weight and more fuel effciency. Describe how your airplane
will put pressure on a culture outside of America (Choose a
specific country). How your airplane will affect their society,
culture, economic, and envornment, etc?
Assume you are making a compisite material airplane, which has ligter weight and more fuel effciency....
Assume you are making a compisite material airplane, which has
ligter weight and more fuel effciency. Describe how your airplane
will put pressure on a culture outside of America (Choose a
specific country). How your airplane will affect their society,
culture, economic, and envornment, etc?
sphere with radius "a" which is made of paramagnetic material (with permeability μ) is placed in...
sphere with radius "a" which is made of paramagnetic material
(with permeability μ) is placed in uniform magnetic field B.
Find:
a) magnetic scalar potential inside and outside
of sphere.
b) magnetization density
c) surface curent density on sphere
A cylindrical resistor with radius K and length L is made from a material with conductivity...
A cylindrical resistor with radius K and length
L is made from a material with conductivity ?. The
potential difference between the circular ends is V.
What is the current that flows from one end to the other?
What is the resistance?
Show that the resistance you found is R = ?L/A, where ? is the
resistivity of the material, and A is the cross-sectional area of
the cylinder.
(Hint: The electric field is constant throughout the resistor,
but its...
You shine a laser on a plastic prism made from an unknown material and measure the...
You shine a laser on a plastic prism made from an unknown
material and measure the angles relative to the normal that the
light takes both inside and outside the medium. You make a plot of
sin ?inside versus sin
?outside for the plastic object and calculate
the slope of best-fit line of your plot to be 0.79365 ± 0.05669.
What is the index of refraction of the plastic object?
Correct Answer: 1.26 +/- 0.09
How do you get the...
Description: An airplane is flying from San Francisco to Seattle which is a distance of approximately...
Description: An airplane is flying from San Francisco to Seattle
which is a distance of approximately 1200 km. The cruising speed of
the plane (VP ) is 400 km/hr relative to the air, and on a calm day
(no wind) the pilot would fly on a path, due north, arriving in
Seattle exactly 3.0 hours after leaving San Francisco(ignoring the
time spent taxiing, taking off, landing etc.). However, today, the
wind is blowing due east with a constant velocity (VW)...
1. A cube (length of each side: 10 cm), made from some unknown material, floats on...
1. A cube
(length of each side: 10 cm), made from some unknown material,
floats on the surface of the ocean. If 72% of the total volume of
this cube is underwater, determine: a) the total mass of water
displaced by the cube b) the buoyant force acting on the cube c)
the total mass of the object d) the density of the
object
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- What mass of sucrose (C12H22O11) should be combined with 461g of water to make a solution...
- You have been asked to give a presentation to a group of experienced managers in Health...
- What are some economic implications of climate change and/or environmental protections? How has COVID-19 impacted the...
- Describe and explain the powers held by legislature within the system oif checks and balances which...
- Scores on a certain IQ test are known to have a mean of 100. A random...
- how to overcome and mitigate budget padding that might happend in bottom up budget approach?
- use repil.it edit my code please i already did all part but need to edit more...
ADVERTISEMENT