The U.S. quarter has a mass of 5.67 g and is approximately 1.55 mm thick. A)...

The U.S. quarter has a mass of 5.67 g and is approximately 1.55 mm thick.

A) How many quarters would have to be stacked to reach 575 ft , the height of the Washington Monument?

B) How much would this stack weigh?

C) How much money would this stack contain?

D) The US National Debt Clock showed the outstanding public debt to be $11,687,233,914,811.11 on August 29, 2009. How many stacks like the one described would be necessary to pay off this debt?

Expert Solution

queen_honey_blossom answered 1 year ago

A solution is 5.66 % by mass NH3 (MM 17.04 g/mol) in water (MM 18.02 g/mol)....

A solution is 5.66 % by mass NH3 (MM 17.04 g/mol) in water (MM 18.02 g/mol). The density of the resulting solution is 0.974 g/mL. What is the mole fraction, molarity and molality of NH3 in the solution?

If a cylindrical steel pressure vessel has a 400-mm inner radius and 8-mm-thick walls. Find the...

If a cylindrical steel pressure vessel has a 400-mm inner radius and 8-mm-thick walls. Find the change (mm) in the inner radius when the vessel is pressurized to 1.2 MPa. Use E = 200 GPa and v = 0.3 for steel.

200-mm-square, 10-mm-thick tile has the thermophysical properties of Pyrex ( 0.80) and emerges from a curing...

200-mm-square, 10-mm-thick tile has the thermophysical properties of Pyrex ( 0.80) and emerges from a curing process at an initial temperature of Ti 140C. The backside of the tile is insulated while the upper surface is exposed to ambient air and surroundings at 25C.(a) Estimate the time required for the tile to cool to a final, safe-to-touch temperature of Tf 40C. Use an average tile surface temperature of T – (Ti Tf)/2 to estimate the average free convection coefficient and...

A camera lens has a focal length of 100 mm (thick lens). The photographer first adjusts...

A camera lens has a focal length of 100 mm (thick lens). The photographer first adjusts the location of the lens to look at an object very far away (infinite distance). Then he tries to take a picture of a person 2 meters away from the lens. How is he going to adjust (move) the lens relative to its original position? What is the distance of the adjustment?

1.250 g mass of standard aspirin is dissolved in approximately 20 mL of 1 M NaOH....

1.250 g mass of standard aspirin is dissolved in approximately 20 mL of 1 M NaOH. This solution is added to a 250-mL volumetric flask and diluted to the mark with DI water. How many grams per mL of aspirin are in the resulting solution. (Note a 250-mL volumetric flask has a precision of 0.01 mL and the amount of NaOH added has no bearing on the significant figures in the final concentration).

I) Approximately 10 g of iron filings has been placed into a waste container of approximately...

I) Approximately 10 g of iron filings has been placed into a waste container of approximately 2L of 6M HCl. 1. Assuming 1 mole of H2 evolved will have the volume of 22.4L, how many liters of hydrogen gas will have been produced if the reaction forming hydrogen gas and iron (III) chloride were to go to completion? (Show calculations) (5 pts) 2. What are some of the hazards of this reaction? (5 pts) 3. What minimum container size would...

Suppose the systolic blood pressure (in mm) of adult males has an approximately normal distribution with...

Suppose the systolic blood pressure (in mm) of adult males has an approximately normal distribution with mean μμ =125 and standard deviation σσ =14. Create an empirical rule graph with the following: A title and label for the horizontal axis including units. Vertical lines for the mean and first 3 standard deviations in each direction with numerical labels on the horizontal axis Labels for the areas of the 8 regions separated by the vertical lines as well. Note: This may...

A solution has a 0.102 mole fraction of CaCl2 (MM 110.98 g/mol) in water (MM 18.02...

A solution has a 0.102 mole fraction of CaCl2 (MM 110.98 g/mol) in water (MM 18.02 g/mol). The density of the solution is 1.05 g/mL. What is the molality, mass percent and molarity of CaCl2 in the solution?

A door is 0.91 m wide, 2.0 m high, and 4.0 cm thick; has a mass...

A door is 0.91 m wide, 2.0 m high, and 4.0 cm thick; has a mass of 25 kg; and pivots on frictionless hinges. A “door closer” is attached to the door and the top of the door frame. When the door is open and at rest, the door closer exerts a torque of 5.2 N⋅m. (A) What is the condition for least force that needs to be applied to hold the door open? (B) What is the least force...

A 50 cm *50 cm copper slab 6.25 mm thick has uniform temperature of 300°C. Its...

A 50 cm *50 cm copper slab 6.25 mm thick has uniform temperature of 300°C. Its temperature is suddenly lowered to 36°C. (quenched in water) Take The conductivity k-370 W/mK, the density rho-9100 kg/m³, the specific heat c-0.38 K/kg°C, the convection coefficient h=90 W/m2C. 1- Calculate the surface area, As a - 0.125 m2 b- 0.5125 m2 c- 0.25 m2 d- 0.5 m2 2. Calculate the volume, a- 0.0015625 m3 b- 0.003205 m3 c- 0.00078125 m3 d- 0.03587 m3 3....

Question