An insulated beaker with negligible mass contains liquid water with a mass of 0.270 kg and...

An insulated beaker with negligible mass contains liquid water with a mass of 0.270 kg and a temperature of 79.2 C .

How much ice at a temperature of -14.4∘C must be dropped into the water so that the final temperature of the system will be 40.0 ∘C ?

Take the specific heat of liquid water to be 4190 J/kg⋅K , the specific heat of ice to be 2100 J/kg⋅K , and the heat of fusion for water to be 3.34×10⁵ J/kg .

Expert Solution

genius_generous answered 2 years ago

An insulated beaker with negligible mass contains liquid water with a mass of 0.275 kg and...

An insulated beaker with negligible mass contains liquid water with a mass of 0.275 kg and a temperature of 65.9 ∘C. How much ice at a temperature of -18.7 ∘C must be dropped into the water so that the final temperature of the system will be 34.0 ∘C? Take the specific heat of liquid water to be 4190 J/kg⋅K, the specific heat of ice to be 2100 J/kg⋅K , and the heat of fusion for water to be 3.34×105 J/kg

An insulated beaker with negligible mass contains liquid water with a mass of 0.250 kg and...

An insulated beaker with negligible mass contains liquid water with a mass of 0.250 kg and a temperature of 62.0 ∘C . How much ice at a temperature of -25.0 ∘C must be dropped into the water so that the final temperature of the system will be 39.0 ∘C ? Take the specific heat of liquid water to be 4190 J/kg⋅K , the specific heat of ice to be 2100 J/kg⋅K , and the heat of fusion for water to...

An insulated beaker with negligible mass contains liquid water with a mass of 0.235 kg and...

An insulated beaker with negligible mass contains liquid water with a mass of 0.235 kg and a temperature of 79.0 ∘C How much ice at a temperature of -24.2 ∘C must be dropped into the water so that the final temperature of the system will be 30.0 ∘C ? Take the specific heat of liquid water to be 4190 J/kg⋅K , the specific heat of ice to be 2100 KJ/kg⋅K , and the heat of fusion for water to be...

A well-insulated tank of 50 m3 volume initially contains 16,000 kg of water distributed between liquid...

A well-insulated tank of 50 m3 volume initially contains 16,000 kg of water distributed between liquid and vapor phases at 25°C. Saturated steam at 1500 kPa is admitted to the tank until the pressure reaches 800 kPa. What mass of steam is added (kg)?

A vessel whose walls are thermally insulated contains 2.20 kg of water and 0.450 kg of...

A vessel whose walls are thermally insulated contains 2.20 kg of water and 0.450 kg of ice, all at a temperature of 0.0 ∘C. The outlet of a tube leading from a boiler in which water is boiling at atmospheric pressure is inserted into the water. Part A How many grams of steam must condense inside the vessel (also at atmospheric pressure) to raise the temperature of the system to 25.0 ∘C ? You can ignore the heat transferred to...

An Insulated piston cylinder device contains 4 L of saturated liquid water at a constant pressure...

An Insulated piston cylinder device contains 4 L of saturated liquid water at a constant pressure of 150 K PA. water is stirred by a paddle wheel while a current of 9 A flows for one hour through a resistor placed in the water. if 80% of the liquid is vaporized doing this constant pressure process and the paddle does 400 kJ of work during this time. determine the resistance of the resistor?

A vessel initially contains 5.0 kg of liquid water and 2.0 kg of ice at 0...

A vessel initially contains 5.0 kg of liquid water and 2.0 kg of ice at 0 C. Energy is added until the ice has just melted. The temperature at the boundary where heat transfer occurs is taken to be the system temperature during the process. The enthalpy of melting ice is 333.5 kJ/kg. Consider the following processes used to melt the ice. a.) Heat is added to from the environment at 20 C. Determine the entropy flux and the total...

A beaker of water at 80 degrees celsius is placed in the center of a well-insulated...

A beaker of water at 80 degrees celsius is placed in the center of a well-insulated room whose air temperature is 20 degrees celsius. Is the final temperature of the water: A) 20 degrees celsius B) Slightly above 20 degrees celsius C) 50 degrees celsius D) Slightly below 80 degrees celsius E) 80 degrees celsius

A mass of 5 kg of saturated liquid vapor mixture of water is contained in a...

A mass of 5 kg of saturated liquid vapor mixture of water is contained in a piston cylinder device at 100 kPa, initially 2 kg of water is in the liquid phase and the rest is in the vapor phase.Heat is now transferred to the water and the piston which is resting on a set of stops, starts moving when the pressure in side reaches 200 kPa, heat transfer continues until the total volume increases by 20%, determine a. the...

An adiabatic tank contains 120 kg of liquid water initially at 70 °C. The water within...

An adiabatic tank contains 120 kg of liquid water initially at 70 °C. The water within the tank is utilized to quench (cool) a 15 kg steel block initially at 300 °C. The steel block is dropped into the tank, and after some time the steel block and the water in the tank reach thermal equilibrium. Determine the total entropy change during the quenching process. Specific heat of steel : Csteel= 0.50 kJ/kg*K. Specific heat of water : Cwater= 4.18...

Question