In a spring controlled governor of the Hartung type, the lengths of the horizontal and vertical...

In a spring controlled governor of the Hartung type, the lengths of the horizontal and vertical
arms of the bell crank levers are 100 mm and 80 mm respectively. The fulcrum of the bell crank
lever is at a distance of 120 mm from the axis of the governor. each revolving mass is 9 kg.
The stiffness of the spring is 25 kN/m. If the length of each spring is 120 mm when the radius of
rotation is 70 mm and the equilibrium speed is 360 r.p.m., find the free length of the spring. If
the radius of rotation increases to 120 mm, what will be the corresponding percentage increase
in speed ? [Hint. Free length of the spring = Length of the spring + compression of the spring]

Expert Solution

samet mamat answered 2 years ago

A 1.00 kg , horizontal, uniform tray is attached to a vertical ideal spring of force...

A 1.00 kg , horizontal, uniform tray is attached to a vertical ideal spring of force constant 195 N/m and a 285 g metal ball is in the tray. The spring is below the tray, so it can oscillate up-and-down. The tray is then pushed down 12.1 cm below its equilibrium point (call this point A) and released from rest. a) How high above point A will the tray be when the metal ball leaves the tray? b) How much...

A 1.30 kg , horizontal, uniform tray is attached to a vertical ideal spring of force...

A 1.30 kg , horizontal, uniform tray is attached to a vertical ideal spring of force constant 200 N/mand a 275 g metal ball is in the tray. The spring is below the tray, so it can oscillate up-and-down. The tray is then pushed down 13.3 cm below its equilibrium point (call this point A) and released from rest. A) How high above point A will the tray be when the metal ball leaves the tray? (Hint: This does not...

A 10 kg block on a horizontal surface is attached to a horizontal spring of spring...

A 10 kg block on a horizontal surface is attached to a horizontal spring of spring constant k = 4.4 kN/m. The block is pulled to the right so that the spring is stretched 5.8 cm beyond its relaxed length, and the block is then released from rest. The frictional force between the sliding block and the surface has a magnitude of 38 N. (a) What is the kinetic energy of the block when it has moved 2.2 cm from...

A 28 kg block on a horizontal surface is attached to a horizontal spring of spring...

A 28 kg block on a horizontal surface is attached to a horizontal spring of spring constant k = 2.9 kN/m. The block is pulled to the right so that the spring is stretched 8.4 cm beyond its relaxed length, and the block is then released from rest. The frictional force between the sliding block and the surface has a magnitude of 37 N. (a) What is the kinetic energy of the block when it has moved 2.7 cm from...

Organizational structures: Describe a specific type of vertical and horizontal structures of your choices and the...

Organizational structures: Describe a specific type of vertical and horizontal structures of your choices and the advantages and disadvantages of them both.

For each function, find the horizontal intercepts, the vertical intercept, the vertical asymptotes, and the horizontal...

For each function, find the horizontal intercepts, the vertical intercept, the vertical asymptotes, and the horizontal asymptote. 19. p(x)= 2x-3/x+4 21. s(x)=4/(x-2)^2 24. g(x)= 2x^2 +7x - 15/ 3x^2- 14+ 15 26. k(x)= 2x^2- 3x- 20/x-5

Explain horizontal and vertical integration.

A block with a mass M is attached to a horizontal spring with a spring constant...

A block with a mass M is attached to a horizontal spring with a spring constant k. Then attached to this block is a pendulum with a very light string holding a mass m attached to it. What are the two equations of motion? (b) What would these equations be if we assumed small x and φ? (Do note that these equations will turn out a little messy, and in fact, the two equations involve both variables (i.e. they are...

A mass of 1.20 kg is attached to a horizontal spring with a spring constant of...

A mass of 1.20 kg is attached to a horizontal spring with a spring constant of 125 N/m. It is stretched to a length of 20.0 cm and released from rest. a) Write down an equation for the position and velocity of the block as a function of time. b) What is the maximum magnitude of acceleration that the block experiences? Is this consistent with Hooke’s Law? c) When the block is to the right of the equilibrium position with...

A 2.50 kg block on a horizontal floor is attached to a horizontal spring that is...

A 2.50 kg block on a horizontal floor is attached to a horizontal spring that is initially compressed 0.0300 m . The spring has force constant 835 N/m . The coefficient of kinetic friction between the floor and the block is 0.41 . The block and spring are released from rest and the block slides along the floor. Part A What is the speed of the block when it has moved a distance of 0.0130 m from its initial position?...

Question