Question

In: Mechanical Engineering

Question 4 A bolt weighting 10 N is accidently dropped down a 4 m long vertical...

Question 4

A bolt weighting 10 N is accidently dropped down a 4 m long vertical cast-iron pipe which is closed by means of a rigid flange at the end. Calculate:

4.1       The instantaneous stress induced in the material of the pipe if the inside diameter of the pipe is 200 mm and the pipe wall thickness is 10 mm.                        

4.2       The instantaneous elongation of the pipe.                                                     

4.3       The gradually applied load that would produce the same stress as in 4.1.   

            E = 140 GPa

Solutions

Expert Solution

samet mamat answered 1 year ago
Next > < Previous

Related Solutions

Question 4 A bolt weighting 10 N is accidently dropped down a 4 m long vertical...
Question 4 A bolt weighting 10 N is accidently dropped down a 4 m long vertical cast-iron pipe which is closed by means of a rigid flange at the end. Calculate: 4.1       The instantaneous stress induced in the material of the pipe if the inside diameter of the pipe is 200 mm and the pipe wall thickness is 10 mm.                         4.2       The instantaneous elongation of the pipe.                                                      4.3       The gradually applied load that would produce the same stress as in...
A uniform 5-m long ladder weighing 80 N  leans against a frictionless vertical wall. The...
A uniform 5-m long ladder weighing 80 N  leans against a frictionless vertical wall. The foot of the ladder is 1 m  from the wall. What is the minimum coefficient of static friction between the ladder and the floor necessary for the ladder not to slip?
The speed of sound is 353 m/s. Supposed a stone is dropped down a well of...
The speed of sound is 353 m/s. Supposed a stone is dropped down a well of depth d=254.9 m. How much time does it take for a sound to be heard at the top of the well? A. 5.57 s B. 7.16 s C. 6.36 s D. 7.96 s E. 8.75 s
Pressurized water (pin= 10 bar, Tin= 110°C) enters the bottom of an L= 10-m-long vertical tube...
Pressurized water (pin= 10 bar, Tin= 110°C) enters the bottom of an L= 10-m-long vertical tube of diameter D= 88 mm at a mass flow rate of m˙⁢= 1 kg/s. The tube is located inside a combustion chamber, resulting in heat transfer to the tube. Superheated steam exits the top of the tube at Pout= 7 bar, Tout= 600°C. Determine the change in the rate at which the following quantities enter and exit the tube: (1) the combined thermal and...
Question – 4                                         &n
Question – 4                                                                                                         20 Marks A Hardware company is considering a new project to improve its manufacturing capacity. A new project requires the use of an existing machine that would otherwise be sold. The managing Director (MD) of the Company is aware about the concept of relevant costing but he is not clear about the application of it in a particular situation. The following information is available about the machine Original purchase price = OMR 40,000 Net Book Value of...
The San Andreas is long but is a vertical fault, so only ~25 km of down-dip...
The San Andreas is long but is a vertical fault, so only ~25 km of down-dip width is cold enough to break in an earthquake (i.e. below 25 km depth, the rocks are too warm to fail in a brittle earthquake and instead deform in other ways). Imagine a 500 km length of the fault breaks, slipping 10 m (this huge earthquake is unlikely but not impossible). What magnitude would this earthquake be? Area is width multiplied by length... and...
Prove that for every n ∈ N: a) (10^n + 3 * 4^(n+2)) ≡ 4 mod...
Prove that for every n ∈ N: a) (10^n + 3 * 4^(n+2)) ≡ 4 mod 19, [note that 4^3 ≡ 1 mod 9] b) 24 | (2*7^(n) + 3*5^(n) - 5), c) 14 | (3^(4n+2) + 5^(2n+1) [Note that 3^(4n+2) + 5^(2n+1) = 9^(2n)*9 + 5^(2n)*5 ≡ (-5)^(2n) * 9 + 5^(2n) *5 ≡ 0 mod 14]
A horizontal beam of length 4.07 m and weight 150 N is attached to a vertical...
A horizontal beam of length 4.07 m and weight 150 N is attached to a vertical wall at a right angle. There is also a support wire of length 5.01 m which attaches the far end of the beam to the wall from above. Off of the far end of the beam also hangs an object of weight 290 N. A) What is the magnitude of the tension in the support wire? B) What is the horizontal component of the...
A vertical spring with k = 490 N/m is standing on the ground. You are holding...
A vertical spring with k = 490 N/m is standing on the ground. You are holding a 5.8 kg block just above the spring, not quite touching it. (a) How far does the spring compress if you let go of the block suddenly? m (b) How far does the spring compress if you slowly lower the block to the point where you can remove your hand without disturbing it? 0.116 m is the answer I got and know how to...
A box of mass 1kg is placed on a vertical spring (k=1000N/m) and pushed down so...
A box of mass 1kg is placed on a vertical spring (k=1000N/m) and pushed down so that the spring is compressed by 0.3m from the unstretched length. When the spring is released, what is the maximum height above the initial position (when the spring is compressed) the box rises?
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT