Question

In: Other

Elementary , irreversible and isothermal gas phase reaction A+B--------- C. Reaction rate constant is 20M-1min-1 at...

Elementary , irreversible and isothermal gas phase reaction A+B--------- C. Reaction rate constant is 20M-1min-1 at temeperature 80 degree celcius . Feed flow rate (10L/min) to the plug flow reactor , which volume is 80 litres, contains 2%A and 2%B and inert gas temperature of 80 degree celcius and pressure 6 bar . Calculate the conversion of A.

Solutions

Expert Solution

Amanda K answered 2 years ago
Next > < Previous

Related Solutions

The irreversible elementary reaction 2A > B takes place in the gas phase in an isothermal...
The irreversible elementary reaction 2A > B takes place in the gas phase in an isothermal tubular reactor. The feed is one mole of A per one mole of C, an inert. The entering temperature and pressure are 427°C and 10 atm, respectively. The gas constant R = 0.08206 atm · L/mol · K. (a) Determine the concentration of A at the entrance to the reactor. (b) If CA0 = 1.0 mol/L, what is the concentration of A at 90%...
The elementary irreversible gas phase reaction A --> B + C is carried out in a...
The elementary irreversible gas phase reaction A --> B + C is carried out in a PFR packed with catalyst. Pure A enters the reactor at a volumetric flowrate of 20 dm3 /s at a pressure of 10 atm and 450K. CpA=40 J/mol.K HfA=-70 kJ/mol   (TR=273 K) CpB=25 J/mol.K HfB=-50 kJ/mol CpC=15 J/mol.K HfC=-40 kJ/mol k = 0.133 exp ( E/R*[ 1/450 ? 1/T ] ) dm3 kg cat. s with E = 31.4 kJ/mol a) Plot the conversion and...
The elementary irreversible gas phase reaction A --> B + C is carried out in a...
The elementary irreversible gas phase reaction A --> B + C is carried out in a PFR packed with catalyst. Pure A enters the reactor at a volumetric flowrate of 20 dm3 /s at a pressure of 10 atm and 450K. Consider that the heat is removed by a heat exchanger jacketing the reactor. The flowrate of coolant through the jacket is sufficiently high so that the ambient exchanger temperature is constant at 50oC. CpA=40 J/mol.K HfA=-70 kJ/mol CpB=25 J/mol.K...
The elementary irreversible gas phase reaction A --> B + C is carried out in a...
The elementary irreversible gas phase reaction A --> B + C is carried out in a PFR packed with catalyst. Pure A enters the reactor at a volumetric flowrate of 20 dm3 /s at a pressure of 10 atm and 450K. Consider that the heat is removed by a heat exchanger jacketing the reactor. The flowrate of coolant through the jacket is sufficiently high so that the ambient exchanger temperature is constant at 50oC. CpA=40 J/mol.K HfA=-70 kJ/mol CpB=25 J/mol.K...
An elementary irreversible gas-phase reaction, A -> 2B, is taking place in an isothermal batch reactor....
An elementary irreversible gas-phase reaction, A -> 2B, is taking place in an isothermal batch reactor. Assume ideal gas behavior for both species. Initially, the reactor contains only the reactant A at a pressure of 5.0 atm, a volume of 20.0 L, and a temperature of 400 K. The rate constant at this temperature is 0.25 min-1. Find the time required for the concentration of A to drop below 5% of its initial value in these two scenarios: (a) A...
The gas-phase, elementary reaction: 2A + 1/2B ----> C + 2D will be conducted in a...
The gas-phase, elementary reaction: 2A + 1/2B ----> C + 2D will be conducted in a constant volume, isothermal batch reactor. The reactor is initially charged with a stoichiometric ratio of A and B. The reaction is moderately exothermic and the heat of reaction will be removed via cooling water. The following data is available: Initial Conditions: Initial concentration of A = Cao, initial concentration of B = Cbo Cooling water: inlet temperature = Ta1, outlet temperature = Ta2, water...
For the elementary gas phase reaction H+C2H4 ®C2H5, the second-order rate constant varies with temperature in...
For the elementary gas phase reaction H+C2H4 ®C2H5, the second-order rate constant varies with temperature in the following way: T / K                                       198      298      400      511      604 1012 k/(cm3molecule-1s-1)       0.20     1.13     2.83     4.27     7.69 a) Use the data to calculate the activation energy, Ea, and the pre-exponential factor, A, for the reaction. b) The simple collision theory of bimolecular reactions yields the following expression for the rate constant: k = (8kT/p m)1/2 sexp(-Ea/RT) where mis the reduced mass of the reactants and s is the reaction cross section. i) Interpret...
The gas phase reaction: 2A+B = 3C , is carried out in an isothermal packed bed...
The gas phase reaction: 2A+B = 3C , is carried out in an isothermal packed bed reactor. The rate is first order with respect to reactants A and B (second order overall) with the rate constant of 14 [liter2 /mole kg of catalyst sec.]. The feed is 50% A, 25 % B and 25 % inert at temperature of 500 K and P = 18 atm and a total flow rate of 20 mole/sec. The exit pressure is measured to...
The elementary liquid phase reaction A + B C is carried out in a 550 dm3...
The elementary liquid phase reaction A + B C is carried out in a 550 dm3 reactor. The entering concentrations of streams A and B are both 2-molar and the specific reaction rate is 0.015 dm3/(mol*min). 1.1 Calculate the time to reach 80%conversion if the reactor is a batch reactor filled to the brim. 1.2 Assuming a stoichiometric feed (10 mol A/min) to a continuous flow reactor, calculate the reactor volume and space-time to achieve 80% conversion if the reactor...
in the gas-phase reaction A + B --> C + 2D, it was found that when...
in the gas-phase reaction A + B --> C + 2D, it was found that when 2 mole A, 1 mole B, and 3 mole D were mixed and allowed to come to equilibrium at 25oC, the resulting mixture contained 0.79 mole C at a total pressure of 1 bar. calculate (a) the mole fractions of each species at equilibrium, (b) Kx (c) K and (d) deltarGo
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT