A gas mixture with a volumetric composition of 35% CO + 65% N2 is burned with...

A gas mixture with a volumetric composition of 35% CO + 65% N2 is burned with fuel, 63% excess air. Fuel enters the furnace at 100 0C and air enters at 25 0C. Calculate the adiabatic (theoretical) flame temperature.

Expert Solution

Amanda K answered 2 years ago

A petroleum gas mixture containing 65% propane (C3H8) and 35% propylene (C3H6) is burned with 40%...

A petroleum gas mixture containing 65% propane (C3H8) and 35% propylene (C3H6) is burned with 40% excess air. The flow rate of the gas mixture is 200 mol/h. All of the propylene and 90% of the propane are consumed. No CO is found in the product. Write the chemical reactions. How much air is added to the reactor (molar flow rate)? What is the molar flow rate of the outlet gas?

A gas mixture containing water vapor has a dry basis molar composition of 8.5% CO, 10.5%...

A gas mixture containing water vapor has a dry basis molar composition of 8.5% CO, 10.5% CO2,0.5% O2 and 80.5% N2. The gas s at 620c and 1 atm with a dewpoint of 57c at a flow rate of 1270mol/h.The gas is cooled to 425C by spraying water at 20C into the gas.Assume that the spray unit is adiabatic .calculat the required water feed rate in kg /h.

A mixture of propane and butane is burned with air. Partial analysis of the stack gas...

A mixture of propane and butane is burned with air. Partial analysis of the stack gas produces the following dry-basis volume percentages: 0.0527% C3H8, 0.0527% C4H10, 1.48% CO, and 7.12% CO2. The stack gas is at an absolute pressure of 780 mmHg and the dew point of the gas is 46.5 ˚C. Calculate the molar composition of the fuel.

A mixture of He and N2 gas is contained in a pipe at 298 K and...

A mixture of He and N2 gas is contained in a pipe at 298 K and 1 atm total pressure which is constant throughout. At one end of the pipe at point 1 the partial pressure of He is 0.6 atm and at the other end, 0.2 m away, the partial pressure is = 0.2 atm. 1. Calculate the flux of He at steady state if DAB of the He-N2 system is 0.684 x 10-4 m2 /s. R = 8.314...

Air is a mixture of gases with the following mass percentage composition: 75.52% N2, 23.15% O2,...

Air is a mixture of gases with the following mass percentage composition: 75.52% N2, 23.15% O2, 1.28% Ar, and 0.046% CO2. A. What are the partial pressures of N2, O2, Ar, and CO2 when the total pressure is 1.100 atm? B. Calculate the molar Gibbs energy of mixing of air at 25C assuming ideal gas behavior. C. Determine the molar enthalpy of mixing and the molar entropy of mixing for air at 1.100 atm and 25C. D. Is the mixing...

A mixture of saturated hydrocarbon and N2 us burned in excess air supplied at 25°C, 740...

A mixture of saturated hydrocarbon and N2 us burned in excess air supplied at 25°C, 740 torrs with 90% RH. An orsat analysis of the stack gas shows 7.6% CO2, 2.28% CO, 1.14% H2, 6.03% O2 and 82.95% N2. With a dew point of 53.46°C. The stack gases leave at 300°C, 765 mmHg with a volume ratio of 2.049 m3 wet stack gas/m3 wet air. a. The formula of hydrocarbon is? b. Mole % analysis of the fuel c. %...

A fuel consists of a mixture of gases the composition of which is CO -20%, C2H2...

A fuel consists of a mixture of gases the composition of which is CO -20%, C2H2 - 35%, H2 45 % by volume. Determine the stoichiometric air-to-fuel ratio by mass. (10.6)

A fuel gas mixture has the following volumetric analysis: CH4= 75.5, C2H4=24.5 Calculate the dry-gas analysis...

A fuel gas mixture has the following volumetric analysis: CH4= 75.5, C2H4=24.5 Calculate the dry-gas analysis for complete combustion with dry air if 20 percent in excess.

A gas mixture contains 5 kg of N2 and 10 kg of O2. Determine (a) the...

A gas mixture contains 5 kg of N2 and 10 kg of O2. Determine (a) the average molar mass and (b) gas constant. (c) What-if Scenario:What would the average molar mass be if the gas mixture contained 10 kg of N2 and 5 kg of O2? a) ? kg/mol b)? KJ/kgk c) ? kg/mol

A gas mixture contains 20.0 mole% H2O(v) and 80.0 mole% N2. The gas temperature and absolute...

A gas mixture contains 20.0 mole% H2O(v) and 80.0 mole% N2. The gas temperature and absolute pressure at the start of each of the three parts of this problem are 66°C and 700.0 mm Hg. Ideal gas behavior may be assumed in every part of this problem. a. If some of the gas mixture is put in a cylinder and slowly cooled at constant pressure, at what temperature would the first drop of liquid form? °C b. If a 30.0...

Question