Question

In: Other

Butane is burned with air. No CO is present in the combustion products. Perform a DOF...

Butane is burned with air. No CO is present in the combustion products. Perform a DOF analysis to prove that the molar composition of the product gas can be determined if the percentage excess air and the percentage conversion of butane are specified

Solutions

Expert Solution

Amanda K answered 2 years ago
Next > < Previous

Related Solutions

A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.4...
A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.4 mole% H2O. After all the water is removed from the products, the residual gas contains 69.2 mole% CO2 and the balance O2. It now turns out that the fuel mixture may contain not only propane and butane but also other hydrocarbons. The fuel does not contain oxygen. However, the dry combustion gases still contain 69.2% carbon dioxide. We wish to determine the elemental composition...
A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.7...
A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.7 mole% H2O. After all the water is removed from the products, the residual gas contains 68.8 mole% CO2 and the balance O2 a. What is the mole percent of propane in the fuel? b. It now turns out that the fuel mixture may contain not only propane and butane but also other hydrocarbons. The fuel does not contain oxygen. However, the dry combustion gases...
A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.7...
A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.7 mole% H2O. After all the water is removed from the products, the residual gas contains 68.6 mole% CO2 and the balance O2 a. What is the mole percent of propane in the fuel?
A mixture of propane and butane is burned with air. Partial analysis of the stack gas...
A mixture of propane and butane is burned with air. Partial analysis of the stack gas produces the following dry-basis volume percentages: 0.0527% C3H8, 0.0527% C4H10, 1.48% CO, and 7.12% CO2. The stack gas is at an absolute pressure of 780 mmHg and the dew point of the gas is 46.5 ˚C. Calculate the molar composition of the fuel.
1)A mixture of butene, C4H8 , and butane,C4H10, is burned in air to give CO2 and...
1)A mixture of butene, C4H8 , and butane,C4H10, is burned in air to give CO2 and water. Suppose you burn 2.84 g of the mixture and obtain 8.77 g of CO2 and 3.99 g of H2O . What are the mass percentages of butene and butane in the mixture? Mass percentage of butene = % Mass percentage of butane = % 2)Copper metal can be prepared by roasting copper ore, which can contain cuprite (Cu2S) and copper(II) sulfide. Suppose an...
Write the balanced reaction equation for the complete combustion of butane, C4H10, in air. Determine the...
Write the balanced reaction equation for the complete combustion of butane, C4H10, in air. Determine the mass and mole fractions of fuel, oxygen and nitrogen in the reactants. Also, determine the mass and mole fraction of carbon dioxide in the products. Determine the mass and mole air-fuel ratios.
Chemical Process Calculations (Chem Eng Question) Assume the combustion of Butane (C4H10) in air to be...
Chemical Process Calculations (Chem Eng Question) Assume the combustion of Butane (C4H10) in air to be complete. a) Use a degree-of-freedom analysis to prove that if the precentage excess air and the percentage conversion of butane are specified, the molar composition of the product gas can be determined. (b) Calculate the molar composition of the product gas for each of the following three cases: i) theorectical aire supplied, 100% conversion of butane; ii) 20% excess air, 100% conversion of butane;...
Calculate the mass fraction stochiometric ratio for the combustion of n-Butane (C4H10) in air ( 20%...
Calculate the mass fraction stochiometric ratio for the combustion of n-Butane (C4H10) in air ( 20% v/v O2   80% v/v N2)* ratio 4:1. Given the following Atomic Weights for the elements and their valencies.* Element            Symbol         Atomic Weight           Valency Hydrogen              H                          1                             1 Carbon                  C                         12                            4 Nitrogen                N                         14                            3 Oxygen                  O                         16                            2 *Note these numbers have been rounded for ease of calculation.
In a furnace, 76 lbs propane C3H8 are burned with 17.2% excess air for complete combustion....
In a furnace, 76 lbs propane C3H8 are burned with 17.2% excess air for complete combustion. What is the percent CO2 in combustion products? Round your answer to the one decimal place.
Methane is completely burned with 250% excess air during a steady flow combustion process. If the...
Methane is completely burned with 250% excess air during a steady flow combustion process. If the reactants and the products are kept at 25 ° C and 1 atmosphere and the water of the products exists in liquid form. Determined: to. The balanced equation b. Heat transfer (kJ / kmol) c. Adiabatic flame temperature (K)
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT