A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.7...

Solutions

Expert Solution

Amanda K answered 1 week ago

Next > < Previous

Related Solutions

A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.4...

A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.4 mole% H2O. After all the water is removed from the products, the residual gas contains 69.2 mole% CO2 and the balance O2. It now turns out that the fuel mixture may contain not only propane and butane but also other hydrocarbons. The fuel does not contain oxygen. However, the dry combustion gases still contain 69.2% carbon dioxide. We wish to determine the elemental composition...

A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.7...

A mixture of propane and butane is burned with pure oxygen. The combustion products contain 46.7 mole% H2O. After all the water is removed from the products, the residual gas contains 68.8 mole% CO2 and the balance O2 a. What is the mole percent of propane in the fuel? b. It now turns out that the fuel mixture may contain not only propane and butane but also other hydrocarbons. The fuel does not contain oxygen. However, the dry combustion gases...

A mixture of propane and butane is burned with air. Partial analysis of the stack gas...

A mixture of propane and butane is burned with air. Partial analysis of the stack gas produces the following dry-basis volume percentages: 0.0527% C3H8, 0.0527% C4H10, 1.48% CO, and 7.12% CO2. The stack gas is at an absolute pressure of 780 mmHg and the dew point of the gas is 46.5 ˚C. Calculate the molar composition of the fuel.

In a combustion device, a mixture of 82 lbs of butane and 212 lbs propane C3H8...

In a combustion device, a mixture of 82 lbs of butane and 212 lbs propane C3H8 are burned with just enough air for complete combustion. How many lbs of total combustion products are formed? Round your answer to the nearest whole number

Butane is burned with air. No CO is present in the combustion products. Perform a DOF...

Butane is burned with air. No CO is present in the combustion products. Perform a DOF analysis to prove that the molar composition of the product gas can be determined if the percentage excess air and the percentage conversion of butane are specified

The gas butane, C4H10(g), can be used in welding. When butane is burned in oxygen, the...

The gas butane, C4H10(g), can be used in welding. When butane is burned in oxygen, the reaction is: 2 C4H10(g) + 13 O2(g) ---> 8 CO2(g) + 10 H2O(g) (a) Using the following data, calculate ΔH° for this reaction. ΔH°f kJ mol-1: C4H10(g) = -125.7; CO2(g) = -393.5 ; H2O(g) = -241.8 ΔH° = ______ (b) Calculate the total heat capacity of 8 mol of CO2(g) and 10 mol of H2O(g), using CCO2(g) = 37.1 J K-1 mol-1 and CH2O(g)...

A sample of propane (20.4 g) is burned in 82.3 g of oxygen in a chemical...

A sample of propane (20.4 g) is burned in 82.3 g of oxygen in a chemical reaction to produce water and carbon dioxide (CO2). If 75.5 g of CO2 is formed, how much water, in grams, was also produced?. How I can get the answer 27.2.

1)A mixture of butene, C4H8 , and butane,C4H10, is burned in air to give CO2 and...

1)A mixture of butene, C4H8 , and butane,C4H10, is burned in air to give CO2 and water. Suppose you burn 2.84 g of the mixture and obtain 8.77 g of CO2 and 3.99 g of H2O . What are the mass percentages of butene and butane in the mixture? Mass percentage of butene = % Mass percentage of butane = % 2)Copper metal can be prepared by roasting copper ore, which can contain cuprite (Cu2S) and copper(II) sulfide. Suppose an...

In a furnace, 76 lbs propane C3H8 are burned with 17.2% excess air for complete combustion....

In a furnace, 76 lbs propane C3H8 are burned with 17.2% excess air for complete combustion. What is the percent CO2 in combustion products? Round your answer to the one decimal place.

mixture of 75 mole% propane and the balance methane is burned with 25 % excess air....

mixture of 75 mole% propane and the balance methane is burned with 25 % excess air. Fractional conversion of 90% of propane and 85% of the methane are achieved; of the carbon that reacts, 95% reacts to form CO2 and the balance reacts to form CO. . 1- draw and completely label the flow chartfor the process including labels for all unknown flow rates. 2-calculate the molar flow rate os air to the reactor per mol of fuel fed to...

Subjects