Question

In: Physics

You’re doing an experiment in a physics lab using ice and water. Do you have 1.5...

You’re doing an experiment in a physics lab using ice and water. Do you have 1.5 kg water with temperature 28°C. You added 0.6 kg ice with initial temperature -22°C. Assuming you have an isolated system,

i) write down the thermal equilibrium equations with amount of heat loss and gain in the system

ii) do all the icemelt justify your answer with calculations

iii) what is the final temperature of the water in the container and why?

iv) if some ice remains how much and what percent of the ice remains?

Solutions

Expert Solution

#Hi, I am providing you the detailed solution for all the parts of the question you have asked. ...

....if you are happy and find this useful please thumbs up. In case, if you have any query regarding the solution please let me know in the comments section below. We can discuss. Thanks!!


Related Solutions

A) For an experiment you are doing in lab, you need 50.0mL of a 2.50 x...
A) For an experiment you are doing in lab, you need 50.0mL of a 2.50 x 10-2 M solution of Ni(NO3)2. Describe how you would prepare this solution from solid nickel nitrate and water to make the most accurate and reproducible solution as possible. Include any necessary calculations and a description of each step you would follow in the lab. Indicate what items you would use from the “tool-box” shown on the next page. (Please limit your description toeightsentences or...
We're doing a classic experiment in lhysics lab on measuring the wavelength of a laser using...
We're doing a classic experiment in lhysics lab on measuring the wavelength of a laser using a GEPE difraction grating with 4 slits per mm, where we measure the X values between N=0, and N=1,2,3,... in order to graph the values and calculate a wavelength. Given that my group set the grating to 304.8cm away from the wall, 10ft, we only had a tape measure... and measured the following x values for each value of N, could someone derive the...
I have a practical for physics lab soon. Can you walk me through how to do...
I have a practical for physics lab soon. Can you walk me through how to do the following and the equations I would need. Measure the combined focal lengths of a two-lens combination consisting of a spherical and cylindrical lens in contact. Qualitatively compare measured and expected values. Apparatus: An optical track with two lenses (spherical and cylindrical); a ruler; and a lamp-house with a coarse wire mesh on it. The focal length of each lens will be given to...
In a physics lab students are conducting an experiment to learn about the heat capacity of...
In a physics lab students are conducting an experiment to learn about the heat capacity of different materials. The first group is instructed to add 1.5-g copper pellets at a temperature of 92°C to 345 g of water at 16°C. A second group is given the same number of 1.5-g pellets as the first group, but these are now aluminum pellets. Assume that no heat is lost to or gained from the surroundings for either group. (a) If the final...
You are given task to design an experiment to convert 1 kg of water in ice...
You are given task to design an experiment to convert 1 kg of water in ice phase at 253 K and 100 kPa into vapor instantaneously. 1.  List down possible assumptions (with justification) to ease your experimental setup idea. 2. Sketch a schematic diagram of your experimental setup 3. Construct one experiment method (with step by step methodology) based on the collected diagram and selected apparatus and items used.
I have a lab assignment that I'm not sure how to do. The experiment is a...
I have a lab assignment that I'm not sure how to do. The experiment is a cart moving 60cm distance and there is a fan on top of it making it have a mass of .56kg. Every trial there is 100g added to the cart. For this part, the time is kept the same. 1. If the force provided by the fan was the same for each run and we have chosen the same time interval, how does the impulse...
In lab, you will experiment with three solutions ‒ DI water, ethanol, and 4M CaCl2 ‒...
In lab, you will experiment with three solutions ‒ DI water, ethanol, and 4M CaCl2 ‒ to develop a method to separate 6 types of plastic. What ideas do you have about possible methods to separate the plastics using these solutions? How could you change the densities of the solutions that are provided? How could you group the types of plastics to work out a separation method? (The intent of this question is for you to generate ideas, and as...
In our physics lab, we did a experiment regarding Hooke's law, and the goal is to...
In our physics lab, we did a experiment regarding Hooke's law, and the goal is to find the spring constant by using a simulation. In the first section of the procedure, our instructor intentionally give us the wrong instruction, which tells us to find spring constant using varying mass, delta x and constant gravity. In the second section of the procedure, we need to figure out what went wrong in the first section that caused us to incorrectly measure the...
As part of an experiment in physics lab, small metal ball of radius r = 2.3...
As part of an experiment in physics lab, small metal ball of radius r = 2.3 cm rolls without slipping down a ramp and around a loop-the-loop of radius R = 3.4 m. The ball is solid with a uniform density and a mass M = 373 g. How high above the top of the loop must it be released in order that the ball just makes it around the loop? Now instead of a sphere, what if we rolled...
In a physics lab experiment, a compressed spring launches a 30 gmetal ball at a 25...
In a physics lab experiment, a compressed spring launches a 30 gmetal ball at a 25 ∘ angle. Compressing the spring 19 cm causes the ball to hit the floor 1.7 m below the point at which it leaves the spring after traveling 6.0 m horizontally. What is the spring constant?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT