Q1 ) i) A project of room temperature measurement system is given to you; in which...

Q1 )
i) A project of room temperature measurement system is given to you; in which you need to design every component of the measurement system. In connection to that, draw the block diagram of the temperature measurement system using passive transducer indicating all the essential elements with input and output of each element. Consider the calibration ratio of (5:1/5) in the display in order to fetch the output.
ii) Analyze the reason, why DC wheat stone bride is not used in thermocouple based measurement system.
iii) A Voltmeter of (0-600V) has a %Limiting error of +1.24% on FSD and % Error of 4%. calculate the following:
a. Limiting error Voltage of the meter.
b. % Limiting error when the meter measures 320V
. c. % Limiting error when the meter measures 120v
. d. The true value, when it measures 320V.
e. Static correction of the meter, for the data mentioned in iv (question above).

Solutions

Expert Solution

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

I am trying to make a temperature warning system in LabVIEW. given temperature T, I want...

I am trying to make a temperature warning system in LabVIEW. given temperature T, I want a green light to turn on when temperature is less than 75 degrees. when the temperature is between 75 and 90 degrees, i want a yellow light to turn on. when the temperature is greater than 90 degrees, I want a red light indicator to turn on. how would this case structure look like in LabVIEW?

A heating system is designed to keep the inner wall surface temperature of a room at...

A heating system is designed to keep the inner wall surface temperature of a room at 25C. Only one wall of the room is contacted with the outer environment. The crosssectional view of the wall is schematically shown in Fig. H1. The height, width and thickness of the wall are 2.5 m, 10 m and 0.2 m, respectively. The wall is made from red bricks with a thermal conductivity of 0.72 W/m.K and solar absorptivity of s = 0.63. The...

I am working on a project that requires a measurement of acceleration. I have a ADXL345...

I am working on a project that requires a measurement of acceleration. I have a ADXL345 accelerometer, an aduino and a MAX7219 dot matrix display. I need help setting up a code for my aduino to display the acceleration from the ADXL345 accelerometer onto the MAX7219 display. Please help!

Q1. You want to keep the indoor temperature of an office at 25oC. The outdoor temperature...

Q1. You want to keep the indoor temperature of an office at 25oC. The outdoor temperature is 5oC. The heat transfer through the building’s exterior is 3 x 106 kJ. To achieve the desired indoor temperature, you are exploring three heat pumps operating between the office interior and: (i) the ground at 12oC; (ii) a pond at 10oC; and (iii) the air outside at 5oC. For each case, what is the minimum theoretical net work input (in kJ) any heat...

1) Which of the following is a solid at room temperature with the lowest melting point?...

1) Which of the following is a solid at room temperature with the lowest melting point? a. caffine b. sodium carbonate c. water d. dichloromethane e. sodium sulfate 2) Which has the highest density and is solid at room temperature? a. caffine b. sodium carbonate c. water d. dichloromethane e. sodium sulfate

A tube at room temperature which is 0.680 m long is open on both ends. Which...

A tube at room temperature which is 0.680 m long is open on both ends. Which frequencies of sound will resonate in the tube? The tube is then covered on one end. Which frequencies of sound will resonate in the tube now? e) lowest frequency f) 2nd lowest frequency g) 3rd lowest frequency h) What is the highest frequency of audible sound that will resonate in this tube?

Solid Mg(OH)2 has a Ksp value of 1.8 x 10-11 at room temperature. You are given...

Solid Mg(OH)2 has a Ksp value of 1.8 x 10-11 at room temperature. You are given a 0.150L solution of a 0.100M MgCl2 solution to mix with 0.150L of 0.100M NH3. How many grams of (NH4)2(SO4) would you need to add to this solution to keep Mg(OH)2 from precipitating? The Kb (NH3) = 1.8x10-5

Which of the processes below are spontaneous at room temperature? Select ALL that apply. The decomposition...

Which of the processes below are spontaneous at room temperature? Select ALL that apply. The decomposition of liquid water into hydrogen and oxygen gasses. Sodium chloride salt dissolving in water. An ice cube melting in water at 25oC. An ice cube forming in water at 25oC. Which of the following statements about entropy are true? Select ALL that apply. If the entropy of a system decreases, the entropy of the surroundings must increase. Gases generally have a higher entropy than...

Q1 a) With the aid of a sketch of the hydraulic system explain the following i)...

Q1 a) With the aid of a sketch of the hydraulic system explain the following i) A Reservoir ii) A pump and a prime mover iii) A pressure control and check valve iv) A power circuit which is made of actuators, motors or cylinders. v) Filter b) List three functions that are performed by a reservoir and the purpose of baffles in it. Q2 a) Define the term ‘Filtration’ in a hydraulic system. b) Explain the difference between a depth...

A temperature measurement system shows the second order dynamics whose output y(s) in 0C and input...

A temperature measurement system shows the second order dynamics whose output y(s) in 0C and input x(s) in 0C is related with the transfer function Gs=(xs) / (ys)=(s2+8s+15) / 2 A step change of magnitude is introduced in this system. Determine (a) Value of response (b) Y(t) at time t=3 sec (c) Maximum value of Y(t) (d) Ultimate value of Y(t) (e) Minimum value of Y(t) we need to find from the quetion

Subjects