Question

In: Physics

Block 1 with m1 = 0.127 kg and block 2 with m2 = 0.163 kg are...

Block 1 with m1 = 0.127 kg and block 2 with m2 = 0.163 kg are supported on a horizontal frictionless table whose surface is 1.75 m above a horizontal floor as shown in the Figure. Block 1 has an initial speed of v = 5.50 m/s toward block 2 which is initially at rest.

A) (7 pts) Block 1 collides with block 2 and coalesces (forms one object). Calculate the velocity of the coalesced object.

B) (10 pts) The combined object formed after the collision in Part A slides off the table with the horizontal velocity determined in Part A. Find the time of flight of the combined object after it leaves the table top and horizontal distance the combined object travels (d), as measured from the edge of the elevated surface, where it hits the floor. Assume the combined blocks have no thickness and behave like a particle. Only if you cannot calculate the horizontal velocity in Part A, use the value 3.50 m/s for partial credit. Otherwise you must use the value you calculated in Part A

Solutions

Expert Solution


Related Solutions

1)A block of mass m1 = 8.00 kg and a block of mass m2 = 12.0...
1)A block of mass m1 = 8.00 kg and a block of mass m2 = 12.0 kg are connected by a massless string over a pulley in the shape of a solid disk having radius R = 0.350 m and mass M = 12.0 kg. The coefficient of kinetic friction between block m1 and the table is 0.27. a) Draw force diagrams of both blocks and of the pulley. b) Determine the acceleration of the two blocks. c) Determine the...
A block of mass m1 = 1.31 kg and a block of mass m2 = 11.4...
A block of mass m1 = 1.31 kg and a block of mass m2 = 11.4 kg are connected by a massless string over a pulley in the shape of a solid disk having radius R = 0.250 m and mass M = 2 kg. The fixed, wedge-shaped ramp makes an angle of θ = 30.0° as shown in the figure. The coefficient of kinetic friction is 0.24 for both blocks. Determine the acceleration of the blocks.
A block of mass m1 = 1.33 kg and a block of mass m2 = 10.4...
A block of mass m1 = 1.33 kg and a block of mass m2 = 10.4 kg are connected by a massless string over a pulley in the shape of a solid disk having radius R = 0.250 m and mass M = 3 kg. The fixed, wedge-shaped ramp makes an angle of θ = 30.0° as shown in the figure. The coefficient of kinetic friction is 0.44 for both blocks. Determine the acceleration of the blocks.
A m1 = 1.00-kg aluminum block and a m2 = 6.10-kg copper block are connected by...
A m1 = 1.00-kg aluminum block and a m2 = 6.10-kg copper block are connected by a light string over a frictionless pulley. The two blocks are allowed to move on a fixed steel block wedge (of angle θ = 34.5°) as shown in the figure. (For aluminum on steel, μs = 0.61 and μk = 0.47. For copper on steel, μs = 0.53 and μk = 0.36.) (a) the acceleration of the two blocks and (b) the tension in...
A ball of mass m1 =5.2 kg and a block of mass m2 =2.0 kg are...
A ball of mass m1 =5.2 kg and a block of mass m2 =2.0 kg are connected with a lightweight string over a pulley with moment of inertia I and radius R=0.25m. The coefficient of kinetic friction between the table top and the block of mass m2 is μk = 0.4. If the magnitude of the acceleration is a=2.7 m/s2. torque_rotational a)What are the tensions T1 and T2 in the string. T1= N T2= N b)Calculate the moment of inertia...
1. Suppose we have two blocks of masses m1 and m2. The block with mass m1...
1. Suppose we have two blocks of masses m1 and m2. The block with mass m1 is moving towards block m2 at speed v. After the collision, we measure the total kinetic energy and find that the total kinetic energy after the collision is m2/(m1+m2) less than the kinetic energy before the collision. Find the final speeds of the two blocks. What type of collision is this? 2. Explain, in words, how we know that a freely spinning asteroid in...
wo blocks are connected by an ideal cord that passes over a frictionless pulley. If m1 = 3.6 kg and m2 = 9.2 kg, and block 2 is initially at r
Two blocks are connected by an ideal cord that passes over a frictionless pulley. If m1 = 3.6 kg and m2 = 9.2 kg, and block 2 is initially at rest 140 cm above the floor, how long does it take block 2 to reach the floor?  
A block of mass m1 =2.00 kg and a block of massm2 = 6.00 kg areconnected...
A block of mass m1 =2.00 kg and a block of massm2 = 6.00 kg areconnected by a massless string over a pulley in the shape of asolid disk having radius R = 0.250 m and mass M =10.0 kg. These blocks are allowed to move on a fixed block-wedge ofangle ? = 30.0
A block of mass m1 = 1 kg is initially at rest at the top of...
A block of mass m1 = 1 kg is initially at rest at the top of an h1 = 1 meter high ramp, see Fig. 2 below. It slides down the frictionless ramp and collides elastically with a block of unknown mass m2, which is initially at rest. After colliding with m2, mass m1 recoils and achieves a maximum height of only h2 = 0.33 m going back up the frictionless ramp. (HINT: Solving each part in sequence will guide...
two masses m1 = 4.70 kg and m2 which has a mass 50.0% that of m1,...
two masses m1 = 4.70 kg and m2 which has a mass 50.0% that of m1, are attached to a cord of negligible mass which passes over a frictionless pulley also of negligible mass. If m1 and m2 start from rest, after they have each traveled a distance h = 2.90 m, use energy content to determine the following. (a) speed v of the masses (b) magnitude of the tension T in the cord
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT