Playing with a water hose

Two children, Ferdinand and Isabella, are playing with a water hose on a sunny summer day. Isabella is holding the hose in her hand 1.0 meters above the ground and is trying to spray Ferdinand, who is standing 10.0 meters away.

To increase the range of the water, Isabella places her thumb on the hose hole and partially covers it. Assuming that the flow remains steady, what fraction f of the cross-sectional area of the hose hole does she have to cover to be able to spray her friend?

Assume that the cross-section of the hose opening is circular with a radius of 1.5 centimeters.

Expert Solution

genius_generous answered 2 years ago

Two children, Ferdinand and Isabella, are playing with a water hose on a sunny summer day.

Two children, Ferdinand and Isabella, are playing with a water hose on a sunny summer day. Isabella is holding the hose in her hand 1.0 meters above the ground and is trying to sprayFerdinand, who is standing 10.0 meters away. Part A Will Isabella be able to spray Ferdinand if the water is flowing out of the hose at a constant speed v0 of 3.5 meters per second? Assume that the hose is pointed parallel to the ground and take...

A garden hose with a diameter of 1.8 in. has water flowing in it with a...

A garden hose with a diameter of 1.8 in. has water flowing in it with a speed of 0.57 m/s and a pressure of 1.3 atmospheres. At the end of the hose is a nozzle with a diameter of 0.54 in. Part A) Find the speed of the water in the nozzle. Part B) Find the pressure in the nozzle.

To water the yard, you use a hose with a diameter of 3.1 cm. Water flows...

To water the yard, you use a hose with a diameter of 3.1 cm. Water flows from the hose with a speed of 1.5 m/s. If you partially block the end of the hose so the effective diameter is now 0.55 cm, with what speed does water spray from the hose?

A fire hose exerts a force on the person holding it. This is because the water...

A fire hose exerts a force on the person holding it. This is because the water accelerates as it goes from the hose through the nozzle. Part A How much force is required to hold a 5.0-cm-diameter hose delivering 360 L/min through a 0.75-cm-diameter nozzle?

A water hose 2.85 cm in diameter is used by a gardener to fill a 28.0-liter...

A water hose 2.85 cm in diameter is used by a gardener to fill a 28.0-liter bucket. (One liter = 1,000 cm3.) The gardener notices that it takes 1.00 min to fill the bucket. A nozzle with an opening of cross-sectional area 0.500 cm2 is then attached to the hose. The nozzle is held so that water is projected horizontally from a point 1.00 m above the ground. Over what horizontal distance can the water be projected? 4.33 m *CORRECT*...

Firemen are shooting a stream of water at a burning building. A high-pressure hose shoots out...

Firemen are shooting a stream of water at a burning building. A high-pressure hose shoots out the water with a speed of 27.0m/s as it leaves the hose nozzle. Once it leaves the hose, the water moves in projectile motion. The firemen adjust the angle of elevation of the hose until the water takes 3.30s to reach a building 45.0m away. You can ignore air resistance; assume that the end of the hose is at ground level. A) Find the...

A fire hose has an inside diameter of 6.40 cm. Suppose such a hose carries a...

A fire hose has an inside diameter of 6.40 cm. Suppose such a hose carries a flow of 40.0 L/s starting at a gauge pressure of 1.62×106N/m2 . The hose goes 10.0 m up a ladder to a nozzle having an inside diameter of 3.00 cm. Calculate the Reynolds numbers for flow in the fire hose and nozzle to show that the flow in each must be turbulent.

Filling a Swimming Pool with a Garden Hose A 1/2 in. (inside) diameter garden hose is...

Filling a Swimming Pool with a Garden Hose A 1/2 in. (inside) diameter garden hose is used to fill a round swimming pool 7.18 m in diameter. How many days will it take to fill the pool to a depth of 1.52 m if water issues from the hose at a speed of 0.258 m/s? You do not need to enter the units.

Water flowing through a garden hose of diameter 2.75 cm fills a 24.0-L bucket in 1.30...

Water flowing through a garden hose of diameter 2.75 cm fills a 24.0-L bucket in 1.30 min. (a) What is the speed of the water leaving the end of the hose? m/s (b) A nozzle is now attached to the end of the hose. If the nozzle diameter is one-third the diameter of the hose, what is the speed of the water leaving the nozzle? m/s

1.Can i use this material for making wheel(rim) for water hose cart? 2.Which kind of procuction...

1.Can i use this material for making wheel(rim) for water hose cart? 2.Which kind of procuction made of this material? 3.What is manifacturing method of produce of them?*polytrimethylene terephthalate(PTT) *PBT * PC+PBT

Question