Question
In: Physics
In the first part of this lab, you will find the coefficient of static friction between...
In the first part of this lab, you will find the coefficient of static friction between paper and a book so we want the surface of the ramp to be paper. This can be done either by making your ramp out of paper (by using a notebook) or by taping a piece of paper to the surface of a ramp.
Conduct your experiment. You should perform at least three trials. Create a data table that includes all of the data taken in your experiment and the coefficient of static friction found from each trial. Find the average value of the coefficient of static friction between the paper and your book.
What type of data do I need to record when performing this experiment?
Solutions
Expert Solution
The following things you should note:
1) initial velocity (v)
2) the distance travelled before it stops (s)
I have explained both, a way to find the coefficient of kinetic friction, and a way to find the coefficient of static friction.
genius_generous answered 2 years agoRelated Solutions
The coefficient of friction (static and kinetic) between an object and a surface can be measured...
The coefficient of friction (static and kinetic) between an
object and a surface can be measured by putting the object on an
adjustable inclined plane. (a) Draw a free-body diagram for the
object, assuming static friction holds it in place on the incline.
(b) Find an equation that can be used to solve for µs, in terms of
the angle θmax which is the largest angle that the object can sit
without sliding. (Hint: You can reduce the problem to...
#4. A vase was placed on the coffee table. The coefficient of static friction between the...
#4. A vase was placed on the coffee table. The
coefficient of static friction between the vase and the table is
0.3689, whereas the coefficient of kinetic friction is 0.1339. The
vase weighs 1.0707kg. A cat decided to redecorate the room by
pushing the vase off the table. As the cat pushes the vase with its
paw, the vase moves. Then, the cat maintains a constant applied
force of 7.37N on the vase in the positive x-direction. What is the...
Block A weighs 445N and block B weighs 130N. The coefficient of static friction between the...
Block A weighs 445N and block B weighs 130N. The coefficient of
static friction between the inclined plane and block A is 0.565,
and the coefficient of kinetic friction is 0.258. The plane is
inclined at the angle θ = 42.0. (a) Find the acceleration of the
system if A is initially at rest. (b) Find the acceleration of the
system if A is initially moving up the incline. (c) What is the
acceleration of the system if A is...
Block A weighs 445N and block B weighs 130N. The coefficient of static friction between the...
Block A weighs 445N and block B weighs 130N. The coefficient of
static friction between the inclined plane and block A is 0.565,
and the coefficient of kinetic friction is 0.258. The plane is
inclined at the angle θ = 42.0. (a) Find the acceleration of the
system if A is initially at rest. (b) Find the acceleration of the
system if A is initially moving up the incline. (c) What is the
acceleration of the system if A is...
A mass of 8 kg rests on a floor with a coefficient of static friction of...
A mass of 8 kg rests on a floor with a coefficient of static
friction of 0.88 and coefficient kinetic friction of 0.33. One
force is applied vertically downward of 28 Newtons and another
force is applied at an angle of 26 degrees below the horizontal.
Calculate what the magnitude this force needs to be in order to
begin to move the mass. If that force is removed and another force
is applied at an angle of 26 degrees above...
A mass of 9 kg rests on a floor with a coefficient of static friction of...
A mass of 9 kg rests on a floor with a coefficient of static
friction of 0.92 and coefficient kinetic friction of 0.37. One
force is applied vertically downward of 22 Newtons and another
force is applied at an angle of 26 degrees below the horizontal.
Calculate what the magnitude this force needs to be in order to
begin to move the mass. If that force is removed and another force
is applied at an angle of 26 degrees above...
A mass of 6 kg is placed on an incline with a coefficient of static friction...
A mass of 6 kg is placed on an incline with a coefficient of
static friction of 1.80 and coefficient of kinetic friction of
1.28. No additional forces are acting on it and it is raised slowly
from a small angle and it begins to slide at some angle. If 10
degrees is added to this angle, and the mass started from rest from
a vertical height of 28 meters, how much longer would it take to
travel down the...
If the coefficient of static friction is 0.60, and the same ladder makes a 46° angle...
If the coefficient of static friction is 0.60, and the same
ladder makes a 46° angle with respect to the horizontal, how far
along the length of the ladder can a 55.0-kg person climb before
the ladder begins to slip? The ladder is 7.5 m in length and has a
mass of 21 kg.
The following table gives the approximate values of the coefficient of static friction μ, for various...
The following table gives the approximate values of the
coefficient of static friction μ, for various materials
Option/ Materials/ μ
1 /Metal on metal/ 0.2
2 /Wood on wood /0.35
3/ Metal on wood /0.4
4/ Rubber on concrete/ 0.7
To start moving a weight W, on a horizontal surface, you must
push with a force F, where F=μW.
Write an m-file that achieves the following:
1. Uses fprintf to print out the option and material information to
the command...
Remarks It's interesting that the final result depends only on the coefficient of static friction. Notice...
Remarks It's interesting that the final result
depends only on the coefficient of static friction. Notice also how
similar Equations (1) and (2) are to the equations developed in
previous problems. Recognizing such patterns is key to solving
problems successfully.
Question A larger static friction constant would result in a:
(Select all that apply.)
a) smaller component of gravitational force along the ramp at
the maximum angle.
b) larger maximum angle.
c)smaller maximum angle.
d)larger component of gravitational force along...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Young and Company claims that its pressurized diving bell will, on average, maintain its integrity to...
- 1) Alternative compiled code sequence using instructions in classes A, B, C. What is the average...
- An asset is purchased on January 1 for $48,700. It is expected to have a useful...
- Do we have any online or offline tool to convert c and cpp programs into MIPS...
- -what is the pH of HCl 0,1M and NaCl 0,1M mixed together solution? -What is the...
- function X=extractDWT(x_train,startS,endS,wStep,wRange) % x_train = input signal % startS = from second % endS = end...
- Do you agree that Social Loafing is similar to Theory X. Give an example to support...
ADVERTISEMENT