Question

In: Physics

Calculate the capacitance and inductance per unit length between two parallel wires of diameter d spaced...

Calculate the capacitance and inductance per unit length between two parallel wires of diameter d spaced D>>d apart.

a) If the wires are 12 AWG copper wire and you desire a transmission line with a characteristic impedance of 600 Ohms what is:

- The distance “D” required.

- The propagation velocity of a 628 x 10^8 Rad/sec frequency on the transmission line.

- The wavelength of a 628 x 10^8 Rad/sec frequency on the transmission line.

- The loss in dB/meter due to the copper conductors on the transmission line.

Solutions

Expert Solution


Related Solutions

calculate capacitance, inductance, resistance and conductance of two parallel wires transmission line
calculate capacitance, inductance, resistance and conductance of two parallel wires transmission line
Two long, parallel wires are separated by a distance of 3.80 cm. The force per unit...
Two long, parallel wires are separated by a distance of 3.80 cm. The force per unit length that each wire exerts on the other is 3.80×10−5 N/m, and the wires repel each other. The current in one wire is 0.600 A. What is the current in the second wire? Express your answer in amperes. Are the two currents in the same direction or in opposite directions?
Two wires, each having a weight per unit length of 1.1x10-4 N/m, are parallel with one directly above the other.
  1. Two wires, each having a weight per unit length of 1.1x10-4 N/m, are parallel with one directly above the other. The wires carry currents of 13.93 A that are equal in magnitude and opposite in direction. How far apart should the wires be placed such that the top wire will levitate above the bottom wire? Report your answer in meters. 2. Consider a -17.7 nC charge traveling next to a current-carrying wire as shown in the figure. What...
What is, neglecting the flux within the wires themselves, the inductance for a length l of...
What is, neglecting the flux within the wires themselves, the inductance for a length l of two, long parallel wires of radius r, separated by a distance d between their centers, that carry equal currents in opposite directions?
A 0.80-μm-diameter oil droplet is observed between two parallel electrodes spaced 11 mm apart. The droplet...
A 0.80-μm-diameter oil droplet is observed between two parallel electrodes spaced 11 mm apart. The droplet hangs motionless if the upper electrode is 26.6 V more positive than the lower electrode. The density of the oil is 885kg/m3. Part A What is the droplet's mass? Express your answer to two significant figures and include the appropriate units. Part B What is the droplet's charge? Express your answer to two significant figures and include the appropriate units. Part C Does the...
2) (a) Calculate the Capacitance per unit area of a MOSCAP with an oxide thickness of...
2) (a) Calculate the Capacitance per unit area of a MOSCAP with an oxide thickness of 2 , when it is biased in inversion. The oxide is Silicon dioxide, the semiconductor is silicon, and the metal is Copper. (b) Does your answer depend on if the silicon substrate is p-type or n-type? (c) Does your answer depend on the type of metal used.
1. Two parallel wires with a length of 1.4 m each are placed 0.06 m apart....
1. Two parallel wires with a length of 1.4 m each are placed 0.06 m apart. One wire carries a current of 18.5 A and another wire carries a current of 31.9 A. Find the absolute value of the magnetic force acting on each wire. 2.What is a magnetic force acting on a charged particle of charge 6.4 x 10-6 C moving with the velocity of 4.8x105 m/s perpendicularly to the magnetic field of 6 T? 3.What is a magnetic...
1) Two wires each of length I with current I are placed parallel to each other...
1) Two wires each of length I with current I are placed parallel to each other separated by a distance d. What physical quanti­ties can you determine using this information? How will the values of these quantities change if one of the currents is re­versed? If one of the currents is doubled? Include a diagram to explain your reasoning. 2) An electric motor has a square armature with 500 turns. Each side of the coil is 12 cm long and...
Two parallel wires separated by d=30 cm carry currents of I1=2.0 A and I2=1.5 A in...
Two parallel wires separated by d=30 cm carry currents of I1=2.0 A and I2=1.5 A in the same direction. (a) [6] Use Ampere’s law to find the magnitude and direction of the field B21 on wire 2 created by the current in wire 1. Explain your use of the right-hand rule to determine the direction of the magnetic field B21. (b) [6] What is the magnitude and direction of force exerted on wire 2 by the current in wire 1?...
Consider two oppositely charged, isolated parallel plates separated by distance D, with capacitance C, charge Q,...
Consider two oppositely charged, isolated parallel plates separated by distance D, with capacitance C, charge Q, and stored energy U. D is small compared to the dimensions of the plates. For each statement below, select "True" or "False". 1. Because of energy conservation, inserting a dielectric leaves U unchanged. 2. When D is halved, Q stays the same. 3. Inserting a dielectric decreases C. 4. When D is doubled, U increases. 5. When D is doubled, C is doubled. 6....
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT